 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| . Version 1.4 2005 PEX 8111 Features General Features o Forward and Reverse bridging o 144-ball BGA package with standard 1.0 mm pitch (13mm x 13mm) o Alternative fine-pitch BGA package (10mm x 10mm) o Low power - 400 milliwatts o EEPROM configuration option with SPI o Internal 8Kbyte shared RAM o 1.5 V core supply voltage o JTAG o Four (4) GPIO pins for maximum design flexibility o Extensive PME support including D0 and D0Active, D1, D2 and D3Hot and D3Cold o Lead-free packaging available Integrated PCI Express Interface o PCI Express Base 1.0a compliant o x1 Link, dual-simplex, 2.5 Gbps per direction o One virtual channel o Automatic LVDS polarity reversal o 128 byte maximum payload size o Link CRC o Link power management o Flow control buffering o PCI Express transaction queues for eight (8) outstanding TLPs PCI Interface o PCI v.3.0: 32 bits, up to 66 MHz o PCI Power Management 1.1 o Internal arbiter supports up to 4 external masters; REQ#/GNT# signals o 3.3V I/O and 5V tolerant PCI o Message Signal Interrupt (MSI) support o Provides PCI clock output o Four mailbox registers for messaging o VGA and ISA Enable registers for legacy operation ExpressLaneTM PCI Express to PCI Bridge Reversible Bridge in a Tiny Package The PLX Technology PEX 8111 bridge enables designers to migrate legacy PCI bus interfaces to the new advanced serial PCI Express. This is ideal for including existing PCI ICs on a PCI ExpressTM Adapter Board, such as the new ExpressCardTM or AdvancedMCTM standards. Both the standard BGA package and the tiny 10mm x 10mm fine-pitch package offering make the PEX 8111 bridge well suited for applications where board real estate is at a premium. With its low power 0.15 micron CMOS design, the PEX 8111 consumes only about 400 mW of power. Forward and Reverse Bridging The PEX 8111 supports forward and reverse bridging as defined by the PCI Express-to-PCI/PCI-X Bridge Specification 1.0. In forward mode, the bridge allows legacy PCI chips and adapters to be used with new PCI Express processor systems. Reverse bridge operation allows conventional PCI processors and chipsets to configure and control advanced PCI Express switches and endpoints. The reverse PEX 8111 not only allows complete configuration of a downstream PCI Express system from the PCI bus, but it also handles limited PCI Express root functions for reverse interrupt and Power Management Events. PCI Bus (32-bit, 33/66 MHz) Block Diagram The PEX 8111 is equipped with a standard PCI Express port that operates as a single, x1 link with a maximum of 250 Megabytes per second of throughput per transmit and receive direction. The single 2.5 Gbps integrated SerDes delivers the highest bandwidth with the lowest possible pin count using LVDS technology. The PEX 8111 has a single parallel bus segment supporting the PCI v.3.0 protocol, and a 32-bit wide parallel data path running up to 66MHz. The device supports internal queues with flow control features to optimize throughput and traffic flow. PCI Master and Target Interface Logic Configuration Registers FIFOs 8K Shared RAM PCI Express Transaction Layer (Packet Construction Logic) PCI Express Data Link Layer PCI Express PHY Layer j PCI Express Link (1 lane, 2.5 GHz) Figure 1. PEX 8111 Block Diagram Design Applications ExpressCardTM Adapter - Forward Bridge The PEX 8111 can be used to quickly upgrade legacy PCI adapter board designs to be compatible with PCI Express standard interface slots. In Figure 2, an existing CardBusTM IC is converted for use on an ExpressCardTM with the addition of the single-chip PEX 8111. Embedded Host Platform - Reverse Bridge The PEX 8111 supports Reverse bridging, enabling designers to utilize the latest PCI Express silicon with widely entrenched PCI host systems. Reverse bridging allows the host processor to reside on the PCI bus; the PEX 8111 will accept configuration cycles from the PCI side and manage the PCI Express interface as a secondary entity within the PCI software model as in Figure 3. PCI Slots CardBus Silicon PCI Bus PEX 8111 ExpressCardTM PCI Host CPU PCI Bus Figure 2. Forward Bridge in ExpressCardTM PEX 8111 PCI Express ASIC Figure 3. Reverse Bridge with PCI CPU Development Tools PEX 8111 Reference Design Kits (RDK) enable rapid customer design. The Reverse Bridge RDK (Figure 4) includes a standard PCI connector (card-edge) and a standard PCI Express slot on the secondary side. The Forward Bridge RDK (Figure 5) includes the PEX 8111 with a single x1 PCI Express port (card-edge) and four PCI slots on the secondary side. Each PEX 8111RDK can be installed in a motherboard to evaluate PEX 8111 features and validate customer software. EEPROM PEX PEX 8114 8111 Bridge EEPROM JTAG Header JTAG Header PEX PEX 8114 Bridge 8111 Figure 4. Reverse Bridge RDK EEPROM Figure 5. Forward Bridge RDK Product Ordering Information Part Number PLX Technology, Inc. 870 Maude Ave. Sunnyvale, CA 94085 USA Tel: 1-408-774-9060 . Fax: 1-408-774-2169 Email: info@plxtech.com Web Site: www.plxtech.com Description PCI Express to PCI Bridge, Standard BGA Package PCI Express to PCI Bridge, Fine-pitch BGA Package PCI Express to PCI Bridge, Standard BGA Package, Lead-Free PCI Express to PCI Bridge, Fine-pitch BGA Package, Lead-Free Forward Bridge Reference Design Kit Reverse Bridge Reference Design Kit PEX8111-BB66BC PEX8111-BB66FBC PEX8111-BB66BC F PEX8111-BB66FBC F PEX8111RDK-F PEX8111RDK-R (c) 2005 PLX Technology, Inc. All rights reserved. PLX and the PLX logo are registered trademarks of PLX Technology, Inc. ExpressLane is a trademark of PLX Technology, Inc., which may be registered under some jurisdiction. All other product names that appear in this material are for identification purposes only and are acknowledged to be trademarks or registered trademarks of their respective companies. Information supplied by PLX is believed to be accurate and reliable, but PLX Technology, Inc. assumes no responsibility for any errors that may appear in this material. PLX Technology, Inc. reserves the right, without notice, to make changes in product design or specification. PCI8111-SIL-PB-P1-1.4 10/05 500 |
Price & Availability of PEX8111-BB66FBC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |