 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| marlow industries inc.(R) Thermoelectric Cooler Performance Values Hot Side Temperature (C) Tmax (C-dry N2): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): 27C 61 2.6 1.0 4.6 4.07 50C 69 3.0 1.0 5.3 --- MI1015T Mechanical Characteristics Positive Lead .346 [8.79] Leads: 28 AWG (0.32) Bus Solid Tinned Copper Negative Lead .432 [10.97] 2.00 +/-.25 [50.80+/-6.35] .094 +/-.005 [2.38 +/-0.13] Cold Side .004 [0.09] .001 [0.03] .001 [0.03] A Ceramic Material: Alumina (AC) Millimeters are in [ ] A Ordering Options MI1015T-01 MI1015T-02 MI1015T-03 both surfaces are metallized hot side exterior is metallized no metallization * * * * For example, and MI1015T with only the hot side metallized is specified as an MI1015T-02AC Pretinned metallized ceramic surface(s) with 117C solder. Thermistor mounted on edge of cold side ceramic. (Calibration available.) Elevated temperature burn-in with test data provided. 102-0027, Rev D Thermoelectric Cooler Performance Curves Environment: One atmosphere dry nitrogen Hot Side Temperature: 27C 80.0 60.0 HEAT LOAD (WATTS) 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 Hot Side Temperature: 50C MI1015T 80.0 60.0 HEAT LOAD (WATTS) 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 T (C) T (C) VOLTAGE (VDC) 40.0 20.0 0.0 40.0 20.0 0.0 VOLTAGE (VDC) 4.0 3.0 2.0 1.0 0.0 0.0 0.2 0.4 0.6 0.8 CURRENT (AMPS) 1.0 Q=0 T=0 5.0 4.0 3.0 2.0 1.0 0.0 0.0 0.2 0.4 0.6 0.8 CURRENT (AMPS) 1.0 Q=0 T=0 For performance information in a vacuum or with hot side temperatures other than 27C or 50C, consult one of our Applications Engineers. Installation Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. Operation Cautions For maximum reliability, storage and operation below 85C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Marlow Industries, Inc. 10451 Vista Park Road Dallas Texas 75238-1645 TEL: 214-340-4900 FAX: 214-341-5212 Internet: http://www.marlow.com Marlow Industries Europe Aberdeen House, South Road Haywards Heath West Sussex RH164NG UK TEL: +44 (0)1444-443404 FAX: +44 (0)1444-443334 Marlow Industries Asia 1-1-8-401 Uehara, Shibuya-ku Tokyo, Japan 151-0064 TEL: +81 (3) 5454-5280 FAX: +81 (3) 5454-5281 Copyright 2000, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0027, Rev D |
Price & Availability of MI1015T-01
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |