![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
BUS IC K-Bus transceiver LIN- / K-Bus transceiver y LIN transceiver + VREG LIN transceiver LIN transceiver + VREG + WD Single wire CAN transceiver CAN transceiver DC/DC CONVERTER MOTOR DRIVER IC RIPPLE COUNTER DRIVER IC I/O IC SENSOR IC SENSOR INTERFACE IC y LIN transceiver with voltage regulator FEATURES y y y y y y y y Supply voltage range VS 5.25V to 18V LIN-Bus transceiver, up to 20kBaud Output driver with slewrate control Very low standby current (<30A typical) Bus input voltage range from - 24V to + 30V (independent of VS) Wake up function via bus Regulator output voltage 5V, 1.5%, 100mA, current limitation Reset with two reset times (15ms and 100ms) and two reset levels: E910.18: 3.15V and 4.65V E910.45: 3.15V and 3.95V y y y y y Undervoltage recognition, fixed threshold at typ. 7.3V Over temperature protection Universal comparator with high voltage input - 40C to + 125C operating temperature SO16w package Two versions of this IC with different reset levels are available: E910.18: 3.15V / 4.65V and E910.45: 3.15V / 3.95V The over temperature protection disables the voltage regulator and the bus driver. After return to normal operation conditions a reset function will be generated. For sensor applications only these two ICs are needed. Even the sensor supply can be done as a rule with the integrated 100mA VDD regulator. DESCRIPTION The IC is designed for LIN slave applications. The microcontroller is completely protected from the harsh automotive environment. APPLICATION y y y Automotive bus systems Body electronics Comfort electronics PINNING Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Name VS EN VTR GND GND BUS SI SO NC RxD TxD GND TEST RESET SENSE VDD Description Positive supply voltage Enable input for VDD Reset time and threshold select Ground Ground Send / receive pin Universal comparator input Universal comparator digital output Not connected Serial data from IC to C Serial data from C to IC Ground For test only. Connect to GND Reset output, active Low Input voltage monitor Output 5V /100mA E910.18 | E910.45 PACKAGE VS EN VTR GND GND BUS SI SO 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VDD SENSE RESET TEST GND TxD RxD NC BLOCK DIAGRAM VBAT VS Vref. VTR VDDOK + _ conf. Reset Gen. SENSE RESET Voltage Regulator EN1 EN2 VDD VS EN C Bus RxD control + RxD TxD TxD SI Vref. + _ SO Note ELMOS Semiconductor AG (below ELMOS) reserves the right to make changes to the product contained in this publication without notice. ELMOS assumes no responsibility for the use of any circuits described herein, conveys no licence under any patent or other right, and makes no representation that the circuits are free of patent infringement. While the information in this publication has been checked, no responsibility, however, is assumed for inaccuracies. ELMOS does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected to cause failure of a life-support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications. Copyright (c) 2005 ELMOS Reproduction, in part or whole, without the prior written consent of ELMOS, is prohibited. www.elmos.de | sales@elmos.de 12 elmos product catalog june 2005 13 |
Price & Availability of E91045
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |