|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CX-2 CRYSTAL 9.6 MHz to 160 MHz TM Miniature AT -Cut Crystal Fundamental Mode: 9.6 MHz - 70 MHz Third Overtone Mode: 70 MHz - 160 MHz DESCRIPTION The CX-2 AT-cut quartz crystal is a high quality AT-cut resonator. The CX-2 is hermetically sealed in a rugged, miniature ceramic package, and available in several lead configurations. The CX-2 crystal is manufactured using the STATEK-developed photolithographic process, and was designed utilizing the experience acquired by producing millions of crystals for industrial, commercial, military and medical applications. actual size FEATURES Low profile hermetically sealed ceramic package Excellent aging characteristics Available with glass or ceramic lid High shock and vibration resistance Custom designs available Full military testing available Designed and manufactured in the USA PACKAGE DIMENSIONS -02 End Lead .094 (2.39) -03 Side Lead .260 (6.60) .094 (2.39) 1 2 1 2 3 .260 (6.60) .210 (5.33) 3 .205 (5.21) .200 (5.08) A EQUIVALENT CIRCUIT A .050(1.27) C0 INCHES (mm) -04 Side Lead .260 (6.60) .094 (2.39) Notes: 1.Terminal 1 is electrically connected internally to terminal 3. 2.Lead dimensions Width: .013" (.33mm) Typical Thickness: .007" (.18mm) Typical 3.A = Glass Lid .080 (2.03) max. Ceramic Lid .095 (2.41) max. 1 L1 C1 R1 2 3 1 2 R1 Motional Resistance L1 Motional Inductance C1 Motional Capacitance C0 Shunt Capacitance .210 (5.33) .100 (2.54) A 10140 - Rev C STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com SPECIFICATIONS PACKAGE HANDLING Specifications are typical at 25oC unless otherwise noted. Specifications are subject to change without notice. 10 MHz Motional Resistance R1 ( ) Motional Capacitance C1 (fF) Quality Factor Q (k) Shunt Capacitance Co (pF) Calibration Tolerance* 60 2.8 95 1.4 A B C Load Capacitance Drive Level Frequency-Temperature Stability** Aging, first year Shock, survival*** Vibration, survival Operating Temperature + _ + _ + _ 32MHz 20 7.8 36 2.4 155.52 MHz 50 0.5 41 3.2 _ 0.01% ( + 100ppm) 0.1% 1.0% 20 pF (Unless specified by customer) 500 W MAX. _ -10OC to +70OC from + 10ppm _ -40OC to +85OC from + 20ppm O O _ -55 C to +125 C from + 30ppm The CX crystal is hermetically sealed in a ceramic package. Normal handling and soldering precautions for small, low thermal mass parts are adequate when installing or testing CX crystals. CX crystals may be wave soldered, with proper precaution taken to avoid desoldering the leads. A slow machine rate or too high a pre-heat temperature or solder bath temperature can damage the crystals. Lead to package solder interface temperature should not exceed 175oC, glass lid to package seal rim temperature should not exceed 210oC. If the seal rim reaches temperatures above the maximum specified, the package may lose its hermeticity. Loss of hermeticity results in a frequency decrease and motional resistance increase. PACKAGING 5ppm MAX. 3,000g, 0.2 msec., 1/2 sine 20g rms, 10-2,000 Hz random -10OC to +70OC Commercial -40OC to +85OC Industrial -55OC to +125OC Military -55OC to +125OC See package handling CX-2-Leaded -Tray Pack (Standard) CONVENTIONAL CMOS PIERCE OSCILLATOR CIRCUIT Storage Temperature Max Process Temperature Rf BUFFER OSC Freq (fO) Contact factory for design guidelines Note: The characteristics of the frequency temperature stability follow that of AT cut thickness-shear mode. * Tighter tolerances available as low as ** Does not include calibration tolerance *** Higher shock version available + _ 5 ppm AMPLIFIER CS RA CG CX-2 CX-1 CD HOW TO ORDER CX-2 LEADED CRYSTALS CX-2 "S" if special or custom design. Blank if Std. -03 32 MHz ( 25ppm Calibration Tolerance* @25OC (A) (B) (C) / 25ppm Frequency Stability over Temp. Range / 50ppm / I ) O.T.=3RD O.T. Mode C=Ceramic Lid Leads Frequency Blank=Fundamental Blank=Glass Lid -02 Mode -03 -04 Total Frequency Temp. Range: Tolerance C = Commercial I = Industrial M = Military S = Specify *Other calibrations fill in ppm. 10140 - Rev C STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com |
Price & Availability of CX-2 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |