View TLP561G07_4109962.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP561G
TOSHIBA Photocoupler GaAs Ired & Photo-Triac
TLP561G
Triac Driver Programmable Controllers AC-Output Module Solid State Relay
Unit in mm
The TOSHIBA TLP561G consists of a zero voltage crossing turn-on photo-triac optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP package.
* * * * * *
Peak off-state voltage: 400V(min.) On-state current: 100mA(max.) Isolation voltage: 2500Vrms(min.) UL recognized: file no. E67349 Isolation operating voltage: 2500Vac or 300Vdc for isolation groupe C*1 Trigger LED current
Classi- fication* (IFT5) (IFT7) Standard Trigger LED Current (mA) VT = 6V, Ta = 25C Min. Max. 5 7 10 T5 T5, T7 T5, T7, blank Marking Of Classification
TOSHIBA Weight: 0.39g
11-7A9
*Ex. (IFT5); TLP561G (IFT5) (Note) Application type name for certification test, please use standard product type name, i.e. TLP561G (IFT5): TLP561G *1: According to VDE0110, table 4.
Pin Configuration (top view)
1 2 3
ZC
6
4
1 : ANODE 2 : CATHODE 3 : N.C. 4 : TERMINAL 1 6 : TERMINAL 2
1
2002-09-25
TLP561G
Maximum Ratings (Ta = 25C)
Characteristic Forward current Forward current derating (Ta 53C) LED Peak forward current (100s pulse, 100pps) Reverse voltage Junction temperature Off-state ontput terminal voltage On-state RMS current Detector Ta = 25C Ta = 70C Symbol IF IF / C IFP VR Tj VDRM IT(RMS) IT / C ITP ITSM Tj Tstg Topr Tsol BVS Rating 50 -0.7 1 5 125 400 100 50 -1.1 2 1.2 115 -55~125 -40~100 260 2500 Unit mA mA / C A V C V mA mA / C A A C C C C Vrms
On-state current derating (Ta 25C) Peak on-state current (100s pulse, 120pps) Peak nonrepetitive surge current (Pw = 10ms, DC = 10%) Junction temperature
Storage temperature range Operating temperature range Lead soldering temperature (10s) Isolation voltage (AC, 1 min., R.H. 60%)
Recommended Operating Conditions
Characteristic Supply voltage Forward current Peak on-state current Operating temperature Symbol VAC IF ITP Topr Min. 15 -25 Typ. 20 Max. 120 25 1 85 Unit Vac mA A C
2
2002-09-25
TLP561G
Individual Electrical Characteristics (Ta = 25C)
Characteristic Forward voltage LED Reverse current Capacitance Peak off-state current Peak on-state voltage Detector Holding current Critical rate of rise of off-state voltage Critical rate or rise of commutating voltage Symbol VF IR CT IDRM VTM IH dv / dt dv / dt (c) IF = 10mA VR = 5V V = 0, f = 1MHz VDRM = 400V ITM = 100mA Vin = 120Vrms, Ta = 85C Vin = 30Vrms, IT = 15mA (Fig.1) (Fig.1) Test Condition Min. 1.0 200 Typ. 1.15 30 10 1.7 0.6 500 0.2 Max. 1.3 10 100 3.0 Unit V A pF nA V mA V / s V / s
Coupled Electrical Characteristics (Ta = 25C)
Characteristic Trigger LED current Inhibit voltage Leakage in inhibited state Capacitance (input to output) Isolation resistance Symbol IFT VIH IIH CS RS Test Condition VT = 3V, RL = 100 IF = rated IFT IF = rated IFT VT = rated VDRM VS = 0, f = 1MHz VS = 500V AC, 1 minute Isolation voltage BVS AC, 1 second, in oil DC, 1 minute, in oil Min. 5x10
10
Typ. 5 100 0.8 10
14
Max. 10 40 300
Unit mA V A pF Vrms Vdc
2500
5000 5000
Fig.1: dv / dt test circuit
Rin VCC + - 120 1 2 3 4 6
Vin
5V, VCC 0V dv / dt ( dv / dt
RL 4k
3
2002-09-25
TLP561G
IF - Ta
100 200
IT(RMS) - Ta
Allowable forward current IF (mA)
R. M. S. On-state current IT (RMS) (mA)
80
160
60
120
40
80
20
40
0 -20
0
20
40
60
80
100
120
0 -20
0
20
40
60
80
100
120
Ambient temperature Ta (C)
Ambient temperature Ta (C)
3000
IFP - DR
Pulse width 100s Ta = 25C
100 50 Ta = 25C
IF - VF
pulse forward current IFP (mA)
IF (mA) Forward current
1000 500 300
30
10 5 3
100 50 30
Allowable
1 0.5 0.3 0.1 0.6
10 3
10-3
3
10-2
3
10
-1
3
100
Duty cycle
ratio DR
0.8
1.0
1.2
1.4
1.6
1.8
Forward
voltage VF (V)
VF/Ta - IF
-3.2 -2.8 -2.4 -2.0 -1.6 -1.2 -0.8 -0.4 0.1 1000 500
IFP - VFP
Pulse forward current IFP (mA)
Forward voltage temperature coefficient VF/Ta (mV/C)
300
100 50 30
10 5 3
Pulse width10s Repetitive Frequency = 100Hz Ta = 25
0.3
0.5
1
3
5
10
30
50
1 0.6
1.0
1.4
1.8
2.2
2.6
Forward
current
IF
(mA)
Pulse forward
voltage
VFP (V)
4
2002-09-25
TLP561G
3 2
Normalized IFT - Ta
VT = 3V
3 2
Normalized IH - Ta
LED current IFT
unit)
(arbitrary
0.5
(arbitrary
unit)
1.2 1
Holding current IH
40 60 100
1.2 1
0.5
Trigger
0.3
0.3
0.1 -40
-20
0
20
80
0.1 -40
-20
0
20
40
60
80
100
Ambient temperature Ta ()
Ambient temperature Ta ()
10
3
Normalized IDRM - Ta
1.4 VDRM = Rated
Normalized VDRM - Ta
Off-state output terminal voltage VDRM (arbitrary unit)
0 20 40 60 80 100
off-state current IDRM (arbitrary unit)
1.2
10
2
1.0
0.8
10
1
0.6
Peak
10
0
0.4
0.2 -40
-20
0
20
40
60
80
100
Ambient temperature Ta
()
Ambient temperature Ta ()
3 2
Normalized VIH - Ta
3 2
Normalized IIH - Ta
VIH
Inhibit current IIH
Inhibit voltage
unit)
(arbitrary
(arbitrary
unit)
1.2 1
1.2 1
0.5
0.5
0.3
0.3 IF = Rated IFT VT = Rated VDRM
IF = Rated IFT 0.1 -40 0.1 -40
-20
0
20
40
60
80
100
-20
0
20
40
60
80
100
Ambient temperature Ta ()
Ambient temperature Ta ()
5
2002-09-25
TLP561G
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
6
2002-09-25

▲Up To Search▲

Price & Availability of TLP561G07

	To Download TLP561G07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .