View MBRS10H100CT_4100175.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MBRS10H100CT - MBRS10H200CT
Pb
RoHS
COMPLIANCE
10.0 AMPS. Surface Mount Schottky Barrier Rectifiers Switchmode Power Rectifiers D2PAK
Features
Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: o 260 C/10 seconds,0.25"(6.35mm)from case
Mechanical Data
Cases: D2PAK molded plastic Terminals: Pure tin plated, lead free. solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics o
Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% MBRS MBRS MBRS Type Number Units Symbol 10H100CT 10H150CT 10H200CT Maximum Recurrent Peak Reverse Voltage VRRM 100 150 200 V Maximum RMS Voltage VRMS 70 105 140 V Maximum DC Blocking Voltage VDC 100 150 200 V
Maximum Average Forward Rectified Current at o TC=133 C Peak Repetitive Forward Current (Rated VR, Square o Wave, 20KHz) at Tc=133 C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at (Note 2) o IF= 5A, Tc=25 C o IF= 5A, Tc=125 C o IF=10A, Tc=25 C o IF=10A, Tc=125 C Maximum Instantaneous Reverse Current o at Rated DC Blocking Voltage @Tc=25 C o @ Tc=125 C Voltage Rate of Change, (Rated VR) RMS Isolation Voltage (t=1.0 second, R.H. 30%, o (Note 4) TA=25 C) (Note 5) (Note 6) Typical Thermal Resistance Per Leg (Note3)
I(AV) IFRM IFSM IRRM VF
0.85 0.75 0.95 0.85 1.0
10 10 120 0.5 0.88 0.75 0.97 0.85 5.0 1.0 10,000 4500 3500 1500 3.5
o
A A A A V
IR dV/dt VISO RJC
uA mA V/uS V C/W
o
Operating Junction Temperature Range TJ -65 to +175 C o Storage Temperature Range TSTG -65 to +175 C Notes: 1. 2.0 us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg. 4. Clip Mounting (on case), where lead does not overlap heatsink with 0.110" offset. 5. Clip mounting (on case), where leads do overlap heatsink. 6. Screw mounting with 4-40 screw, where washer diameter is 4.9 mm (0.19") Version: A07
RATINGS AND CHARACTERISTIC CURVES (MBRS10H100CT - MBRS10H200CT)
FIG.1- FORWARD CURRENT DERATING CURVE
6 RESISTIVE OR INDUCTIVE LOAD 5
FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
180
PEAK FORWARD SURGE CURRENT. (A)
AVERAGE FORWARD CURRENT. (A)
150
Tj=Tj max. 8.3ms Single Half Sine-Wave JEDEC Method
4
120
3
90
2 1 0 0
60
30
25
0
50 75 125 100 o CASE TEMPERATURE. ( C) 150 175
0.1
1
10
100
NUMBER OF CYCLES AT 60Hz
FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
FIG.4- TYPICAL REVERSE CHARACTERISTICS
5
40
1
INSTANTANEOUS FORWARD CURRENT. (A)
20 10 Tj=25 0C 4 2 1
INSTANTANEOUS REVERSE CURRENT. (mA)
Tj=125 0C
Tj=125 0C 0.1
Tj=75 0C 0.01
0.001 Tj=25 0C
0.4 0.2 0.1 0.6 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE 0.7 0.8 1.1 0.9 1.0 FORWARD VOLTAGE. (V) 1.2 0.0001 0 1.3 20 40 60 80
0
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
FIG.5- TYPICAL JUNCTION CAPACITANCE
5,000
100
FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG
JUNCTION CAPACITANCE.(pF)
Tj=25 0C f=1.0MHz Vsig=50mVp-p
TRANSIENT THERMAL IMPEDANCE. ( OC/W)
100
10
1,000
500
1
100 0.1
1
10 REVERSE VOLTAGE. (V)
0.1 0.01
0.1
1 T, PULSE DURATION. (sec)
10
100
Version: A07

▲Up To Search▲

Price & Availability of MBRS10H100CT

	To Download MBRS10H100CT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .