View V26L8060AA_1333382.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Version : 1.0
V26L8060AA
TECHNICAL
SPECIFICATION
MODEL NO. : V26L8060AA
Customer's Confirmation Date
By
PVI's Confirmation
Confirmed By
Prepared By
PRIME VIEW INTERNATIONAL CO.,LTD.
3,LI SHIN RD. 1,SCIENCE-BASED INDUSTRIAL PARK,HSINCHU,TAIWAN,R.O.C. http://www.pvi.com.tw
Date : Apr. 7, 2000 This technical specification is subject to change without notice.

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1
V26L8060AA

NO.
! (
/ 1
ITEM

"#$ %%"&' )*+%& ,-&&.$ 0 + .,2% 34"$&
PAGE
! ( / / (

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2
V26L8060AA
1. Application
This data sheet applies to a color TFT LCD module, V26L8060AA. V26L8060AA module applies to note-book PC, sub-note-book PC and other O/A products which require high quality flat panel display. This module is not designed for aerospace, avionics, medical, F/A, transportation, car or any other products which require extreme level of reliability. Prime View assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet.
2. Features
. Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display Colors262,144 colors . Optimum Viewing Direction6 o'clock . 3.3V LVDS interface standard : DS90CF364 as receiver . +3.3V DC supply voltage for TFT LCD panel driving . Back-light driving DC/AC inverter not included in this module
3. Mechanical Specifications
Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Specifications 26.4(diagonal) 10.4 (diagonal) 800(R, G, B)600 262,144 211.2(H)158.4 (V) 0.264 (H)0.264 (V) Stripe 238.6 (w)171.0(H)6.0 max (D) 312(typ.) Single CCFL, side-light type Anti-glare and hard-coating Normally white Unit cm inch dot mm mm mm g
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3
V26L8060AA
4.Mechanical Drawing of TFT-LCD Module

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4
V26L8060AA
5.Input Terminals
5-1) TFT-LCD Panel Driving Connector type : TBD Pin No. Symbol Function 1 VDD Power supply : +3.3V 2 VDD Power supply : +3.3V 3 GND 4 GND 5 IN0Pixel data Transmission pair 0 (negative -) 6 IN0+ Pixel data Transmission pair 0 (positive +) 7 IN1Pixel data Transmission pair 1 (negative -) 8 IN1+ Pixel data Transmission pair 1 (positive +) 9 IN2Pixel data Transmission pair 2 (negative -) 10 IN2+ Pixel data Transmission pair 2 (positive +) 11 CLKSampling Clock (negative -) 12 CLK+ Sampling Clock (positive +) 13 GND 14 GND
Remark
Recommended Transmitter(DS90C*363 of National Semiconductor) to V26L8060AA interface Assignment : Input terminal Graphic controller output signal Output signal To V26L8060AA of DS 90C*363 symbol interface terminal(Symbol) Symbol No. Symbol Function TIN0 44 R0 Red pixel data (LSB) TIN1 45 R1 Red pixel data TIN2 47 R2 Red pixel data Tout0No.5 : IN0TIN3 48 R3 Red pixel data TIN4 1 R4 Red pixel data Tout0+ No.6 : IN0+ TIN5 3 R5 Red pixel data(MSB) TIN6 4 G0 Green pixel data (LSB) TIN7 6 G1 Green pixel data TIN8 7 G2 Green pixel data TIN9 9 G3 Green pixel data Tout1No.7 : IN1TIN10 10 G4 Green pixel data TIN11 12 G5 Green pixel data(MSB) Tout1+ No.8 : IN1+ TIN12 13 B0 Blue pixel data(LSB) TIN13 15 B1 Blue pixel data TIN14 16 B2 Blue pixel data TIN15 18 B3 Blue pixel data TIN16 19 B4 Blue pixel data Tout2No.9 : IN2TIN17 20 B5 Blue pixel data(MSB) TIN18 22 NC no connection Tout2+ N0.10 : IN2+ TIN19 23 NC no connection TIN20 25 ENAB Compound Synchronization signal CLK in 26 NCLK Data sampling clock TCLK outNo.11 : CLK INTCLK out+ No.12 : CLK IN+
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5
V26L8060AA
Data stream of IN0-/+, IN1-/+ and IN2-/+ for V26L8060AA

LVDS Interface Block Diagram

5-2) Backlight driving Connector type : "BHR-02VS-1" of Japan Solderless Terminal MFG Co. LTD PIN NO. Symbol Description Remark 1 VL1 Input Voltage(High) 2 VL2 Input Voltage(Low)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6

!

V26L8060AA
6. Absolute Maximum Ratings:
Parameters Supply Voltage Input Signals Voltage Backlight Driving Voltage Backlight Driving Frequency Storage Temperature Operating Temperature Symbo l VDD VIN VL FL TST TOP MIN. -0.3 -0.3 0 -20 0 MAX. +4.0 VDD+0.3 2000 100 +60 +50 GND=0V, Ta=25 Unit Remark V V V KHz
Note 6-1
Note 6-2
Note 6-1: LVDS signal Note 6-2: Humidity : 90% RH Max. at Ta 40. Maximum wet-bulb temperature is at 39or less at Ta > 40. No condensation.
7.
Electrical Characteristics
GND = 0VTa = 25 Max. Unit Remark 3.6 V 430 mA Note 7-1 100 mV Note 7-2 6.0 mA 3mA : 80 cd/m2 6mA : 170cd/m2 Note 7-3 Note 7-5 600 Vrms IFL=5mA Note 7-3 Vrms at Ta=25C at Ta=0C KHz W Note 7-4 -
7-1) Recommended Operating Conditions: Item Symbol Supply Voltage VDD Current Dissipation IDD LVDS Differential input high threshold VTH LVDS Differential input low threshold VTL Lamp Current IFL
Min. 3.0 -100 2.0
Typ. 3.3 370 3.0
Lamp Voltage Lamp Initial Voltage Lamp Driving Frequency Total power consumption (at IFL=3mA) (at IFL=6mA)
VL VSFL FL
500 1000 -
550 1200 45 2.87 4.50
Note 7-1 : To test the current dissipation of VDD, using the "color bars" testing pattern shown as below Note 7-2 : Please refer to DS90CF364 specification by National Semiconductor Corporation. This LCD module conforms to LVDS standard. Note 7-3 : The back-light driving waveform should be as closed to sine-wave as possible Note 7-4 : Not including the efficiency of back-light DC/AC inverter Note 7-5 : Lamp current is measured with current meter for high frequency as shown below
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7
V26L8060AA

White Yellow Cyan Green Magenta Red Blue Black

Idd current dissipation testing pattern
#$#% & '
) (
"
* **
+,-)%)
Lamp current dissipation testing configuration 7-2) Input / Output signal timing chart (A) Vertical Timing

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8
V26L8060AA
(B) Horizontal Timing

./(. 0/(0 1/(1

D) Timing Specifications Item Frame Cycling Vertical Display Period Horizontal Scanning Time Horizontal Display Period Clock Cycle Clock High Level Time Clock Low Level Time Hold time Set-up time Symbol t1 t2 t3 t4 t5 t6 t7 t8 t9 Min. 604 X t3 600 X t3 844 X t5 26.3 24.0 9.0 9.0 4.0 5.0 Typ. 628X t3 16.58 600 X t3 26.4 800 X t5 25.0 Max. 677 X t3 17.86 600 X t3 Unit Remark ms s ns ns ns ns ns
1056 X t5 1064 X t5
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9
V26L8060AA
7-3) Display Color and Gray Scale Reference Input Color Data Green 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0
Color Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0
Red 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0
Blue 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Basic Colors
Red
1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0
Blue
000000000000111101 000000000000111110 000000000000111111
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10
V26L8060AA
7-4) Pixel Arrangement The LCD module pixel arrangement is the stripe.

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11
V26L8060AA
8. Optical Characteristics
8-1) Specification: Parameter Symbol Horizontal (to 12 Viewing Angle o'clock) Vertical (to 6 o'clock) Contrast Ratio Response time Luminance Luminance Uniformity White Chromaticity Lamp Life Time Cross Talk Ratio Rise Fall CR Tr Tf L U x y CTK Condition MIN. 35 10 25 Optimum direction =0 =0 =0/=0 100 TYP. 45 15 40 180 MAX. Unit deg Ta = 25 Remarks
CR10
deg Note 8-1 deg Note 8-2
15 50 ms Note 8-4 25 50 ms 70 80 cd/ IFL=3mA, Note 8-3 170 IFL=6mA, Note 8-3 55 80 % Note 8-5 0.280 0.330 0.380 0.290 0.340 0.390 10000 hr 3.5 % Note 8-6
All the optical measurement shall be executed 30 minutes after back-light being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shown as following figure.
2#3 34 1'%/1'%5
6
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12
$8 #$#% &
& 7 "
3

--

V26L8060AA
Note 8-1The definitions of viewing angles are as follows.

Note 8-2 : The definition of contrast ratio =

Note 8-3Topcon BM-5A luminance meter 2field of view is used in the testing (after 30 minutes' operation). The typical luminance value are measured at lamp current 3.0 mA. The max luminance value are measured at lamp current 6.0 mA. Note 8-4: Definition of Response Time Tr and Tf:
White 100% 90% Brightness 10% 0% Tr Tf Black White
Note 8-5: The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13
V26L8060AA
The test pattern is white (Gray Level 63). 25% 50% 75%
25%
50%
75%
Note 8-6: Cross Talk (CTK) =
YA-YB YA
100%
YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter : BM 5A (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module
Pattern A (Gray Level 31) YA 1/3 1/3 1/3 1/3
Pattern B (Gray Level 31, central black box exclusive) YB
1/3
1/3 Black (Gray Level 0)
: Measuring Point (A and B are at the same point.)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14
V26L8060AA
9. Reliability Test
No Test Item Test Ta = +60, 240 hrs Ta = -20, 240 hrs Ta = +50, 240 hrs Ta = 0, 240 hrs Condition Remark 1 High Temperature Storage Test 2 Low Temperature Storage Test 3 High Temperature Operation Test 4 Low Temperature Operation Test 5 6 Operation Test Thermal Cycling Test (non-operating)
High Temperature & High Humidity Ta = +50, 80%RH, 240 hrs (NoCondensation) 0!"+25!"+60, 50 Cycles 1Hr 0.5Hr 1Hr Frequency10 ~ 57 HZ , Amplitude0.15 mm 58~500Hz, 1G Sweep time: 11 min Test Period: 3 hrs (1 hr for each direction of X, Y, Z) 80G, 6ms, X,Y, Z 1 times for each direction
7
Vibration Test (non-operating)
8
Shock Test (non-operating) Ta: ambient temperature
[Judgement Criteria] Under the display quality test conditions with normal operation state , there should be no change which may affect practical display function.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15
V26L8060AA
10. Block Diagram
VL1
B a c k -lig h t(L a m p 1 )
VL2
1

2 3

Control Circuit
ENAB CLK

Gate Driver

T F T -L C D D is p la y A re a

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16

598 599 600 123 4 2400
S o u rc e D riv e r
V26L8060AA Revision History
Rev. 0.1 0.2 Issued Date Revised Content March 19, 1999 New April 17, 1999 Page 3, Application : modify the description. Page 3, Feature : modify the description. Page 3, Mechanical Spec. : adding two items, "Surface treatment" and "Display mode". Page 6 : modify LVDS Interface Block Diagram Page 7 : adding Note 7-3 : The back-light driving waveform should be as closed to sine-wave as possible " Page 7 : adding Note 7-5 : Lamp current is measured with current meter for high frequency " Page 13, Optical characteristics : adding the optical characteristics measuring condition and configuration figure. page 13, Note 8-5 , adding the "measuring method and instrument" of display uniformity as follow : Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module June 24, 1999 Page 3, 3. Mechanical spec. : The module weight change from 300g (typ.) to 315g (typ.) The module outline dimension change to : 238.6 (w)171.0(H)6.0 max (D) Page 4, 4. Mechanical drawing of TFT LCD module : new version Page 6, 5-2) Lamp connector type, change from "BHR-03VS-1" to "BHR-02VS-1"
0.3
Pin 2 : Input voltage (Low), Pin 3 was not exist. Page 8, Re-drawing the "Lamp current dissipation testing configuration". The lamp connector change from 3 pin to 2 pin. Page 8, Re-drawing the "Vertical timing chart" Page 9, Re-drawing the "Horizontal timing chart" Page 9, Delete "Recommended input clock timing chart to transmitter (DS90C*363) " Page 9, D) Timing spec. : "Frame Cycling (typ. value)": change from 17.78 ms to16.58 ms
0.4 0.5 Sep. 10,1999 Feb. 10, 2000 3. Mechanical spec. : The module weight change from 315g (typ.) to 300g (typ.) 8. Optical spec.: The typical brightness change from 70 nits to 95 nits. Min. brightness change from 65 nits to 75 nits 9 Reliability test:: item(7), vibration test condition, amplitude change from 1.5mm to 0.2mm 8. Optical spec.: The typical brightness change from 95 nits to 80 nits. Min. brightness change from 75 nits to 70 nits Change contrast ratio from 200 (typ.) to 180 (typ.) Change white color coordinate from (0.320, 0.330) to (0.330, 0.340) 3.Mechanical spec. Change module weight from 300g to 312g. 4.Mechanical Drawing: Replaced by a new drawing because a little change of mounting hole position. 7. Electrical spec. Change power consumption from 2.5W(4.3W) to 2.87W (4.5W)
1.0
April, 7, 2000
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17

▲Up To Search▲

Price & Availability of V26L8060AA

	To Download V26L8060AA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .