 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 3 V, SILICON MMIC FREQUENCY UP-CONVERTER FEATURES * WIDE BAND OPERATION: IF Input: 3 dB BW: 50 ~ 400 MHz Typical RF Output: 3 dB BW: 0.1~2 GHz Typical * LOW VOLTAGE OPERATION: 2.7 V Minimum * POWER SAVE FUNCTION * SUPER SMALL PACKAGE * TAPE AND REEL PACKAGING OPTION AVAILABLE UPC8106T INTERNAL BLOCK DIAGRAM IF Input RF Output Power Save DESCRIPTION The UPC8106T is an L-Band Frequency Up-Converter manufactured using the NESAT III MMIC process. The UPC8106T was designed for low distortion. Operation from a 3 volt supply voltage makes this device ideal for handheld cellular, PCN and wireless LAN applications. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. LO Input VCC GND ELECTRICAL CHARACTERISTICS (TA = 25C, VCC = 3 V, fIF = 240 MHz, PLO = -5 dBm, VPS 2.5V) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC CG NF PSAT OIP3 TPS RTH (J-A) PARAMETERS AND CONDITIONS Circuit Current, Conversion Gain1, SSB Noise Figure, VPS 2.5 V VPS = 0 V fRF = 900 MHz fRF = 1.9 GHz fRF = 900 MHz fRF = 900 MHz fRF = 1.9 GHz UNITS mA A dB dB dB dBm dBm dBm dBm s s C/W C/W -4 -6.5 MIN 4.5 7 4 UPC8106T T06 TYP 9 10 7 8.5 -2 -4 +5.5 +2.0 2.0 2.0 620 230 MAX 13.5 10 13 10 Saturated Output Power2, Output 3rd Order Intercept Point3, fRF = 900, 900.4 MHz fRF = 1.9, 1.9004 GHz Power Save Response Time, VP/S : GNDVCC VP/S : VCC GND Thermal Resistance (Junction to Ambient) Free Air Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB Notes: 1. PIF = -30 dBm. 2. PIF = -10 dBm. 3. fIF1 = 240.0 MHz, fIF2 = 240.4 MHz California Eastern Laboratories UPC8106T ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) SYMBOLS VCC VPS PT TOP TSTG PARAMETERS Supply Voltage Power Save Voltage Total Power Dissipation2 Operating Temperature Storage Temperature UNITS V V mW C C RATINGS 6.0 6.0 280 -40 to +85 -55 to +150 RECOMMENDED OPERATING CONDITIONS SYMBOLS VCC TOP PLO PARAMETERS Supply Voltage Operating Temperature LO Input Level UNITS V C dBm MIN 2.7 -40 -10 TYP MAX 3.0 +25 -5 5.5 +85 0 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85C). TEST CIRCUIT C 6 RFOUT IFIN 1 100 pF L VCC 5 VCC GND 2 1000 pF 4 PS LOIN 3 100 pF Recommended Values C L 900 MHz 1.0 pF 8.2 nH 1.9 GHz 1.8 pF 18 nH TYPICAL PERFORMANCE CURVES (TA = 25C unless otherwise specified) CURRENT vs. VOLTAGE 12 UPC8106T 10 15 VCC = VPS = 3.0 V 20 CURRENT vs. TEMPERATURE Current, ICC (mA) 8 Current, ICC (mA) VCC = VPS 0 2 4 6 8 6 10 4 5 2 0 0 -40 -20 0 +20 +40 +60 +80 +100 Supply Voltage, VCC (V) CURRENT vs. POWER SAVE PIN INPUT VOLTAGE 12 VCC = 5.5V 10 VCC = 3.0V 14 12 Temperature (C) CONVERSION GAIN vs. OUTPUT FREQUENCY 8 Conversion Gain, CG (dB) OUTPUT MATCHED AT 900 MHZ OUTPUT MATCHED AT 1900 MHZ Current, ICC (mA) 10 6 8 4 6 4 2 2 0 0 2 4 6 0 0.5 1.0 1.5 2.0 2.5 Power Save Voltage, VPS (V) RF Output Frequency, fRF (GHz) UPC8106T TYPICAL PERFORMANCE CURVES (TA = 25C) CONVERSION GAIN vs. INPUT LEVEL AT RF = 900 MHz 15 fRFout = 900 MHZ fLO = 1140 MHZ VCC = VP/S 3.0V CONVERSION GAIN vs. VOLTAGE AND FREQUENCY 11 10 Conversion Gain, CG (dB) fRFOUT = 900 MHZ 9 8 7 fRFOUT = 1.9 MHZ 6 5 VP/S = VCC 4 2 4 6 Conversion Gain, CG (dB) 10 5 0 -20 -10 0 10 Supply Voltage, VCC (V) LO Power Input, PLO (dBm) CONVERSION GAIN vs. INPUT LEVEL AT RF = 1.9 GHz 15 fRFOUT = 1.9 GHz fLOIN = 1.660 GHz VCC = VP/S = 3.0 V IM3 AND RF OUTPUT LEVEL vs. IF INPUT LEVEL AND VOLTAGE AT RF = 900 MHz 10 RF Output Level, PRFOUT (dBm) Conversion Gain, CG (dB) VCC = 5.5 V 0 PRFOUT -20 VCC = 2.7 to 3.0 V VCC = 5.5 V VCC = 2.7 to 3.0 V -40 IM3 -60 10 5 0 -20 -10 0 10 -80 -40 -20 fIFIN1 = 240.0 MHz fIFIN2 = 240.4 MHz fLOIN = 1140.0 MHz VCC = VP/S 0 LO Power Input, PLO (dBm) IF Input Level, PIFIN (dBm) IM3 AND RF OUTPUT LEVEL vs. IF INPUT LEVEL AND VOLTAGE AT RF = 1.9 GHz 10 IM3 AND RF OUTPUT LEVEL vs. IF INPUT LEVEL AND TEMPERATURE AT RF = 900 MHz RF Output Level, PRFOUT (dBm) 0 PRFOUT VCC = 5.5 V VCC = 3.0 V VCC = 2.7 V RF Output Level, PRFOUT (dBm) 0 PRFOUT -20 TA = 85 C TA = -40 C TA = 25 C TA = -40 C -20 VCC = 5.5 V VCC = 2.7 V TA = 85 C -40 -40 IM3 TA = -40 C fIFIN1 = 240.0 MHz fIFIN2 = 240.4 MHz fLOIN = 1140.0 MHz VCC = VP/S = 3.0 V -10 0 10 IM3 -60 fIFIN1 = 240.0 MHz fIFIN2 = 240.4 MHz fLOIN = 1.660 GHz VCC = VP/S -40 -20 0 -60 -80 -80 TA = 85 C -40 -30 -20 IF Input Level, PIFIN (dBm) IF Input Level, PIFIN (dBm) UPC8106T TYPICAL PERFORMANCE CURVES (TA = 25C) LO LEAKAGE AT RF AND IF PINS vs. LO INPUT FREQUENCY AT RF = 1.9 GHz 0 fRFOUT = 1.9 GHz PLOIN = -5 dBm VCC = VP/S = 3.0 V IM3 AND RF OUTPUT LEVEL vs. IF INPUT LEVEL AND TEMPERATURE AT RF = 1.9 GHz Third Order Intermod Level, IM3 (dBm) RF Output Level, PRFOUT (dBm) PRFOUT -20 TA = -40 C TA = 85 C LO Leakage, LOL (dBm) 0 TA = 85 C -10 LO to RF -20 -40 IM3 TA = -40 C TA = -40 C TA = 25 C -30 LO to IF -60 -80 TA = 25 C -40 -30 TA = 85 C -20 fIFIN1 = 240.0 MHz fIFIN2 = 240.4 MHz fLOIN = 1.660 GHz VCC = VP/S = 3.0 V -10 0 10 -40 -50 0 1 2 3 IF Input Level, PIFIN (dBm) LO Input Frequency, fLOIN (GHz) S11 - RF OUTPUT PORT S11 - LO INPUT PORT 1 2 2 1 Start 500 MHz Stop 2300 MHz Start 0.3 MHz Stop 3000 MHz 2: 13.845 -77.34 1: 20.633 -144.74 Marker 1 - 900 MHz Marker 2 - 1.9 GHz 1.0850 pF 1.2218 pF 2: 12.050 -45.695 1: 13.961 -76.158 Marker 1 - 1.14 GHz Marker 2 - 1.66 GHz 2.1780 pF 1.8332 pF S11 - IF INPUT PORT 1 Start 50 MHz 1: 154.64 -494.41 Marker 1 - 250 MHz Stop 1000 MHz 1.2876 pF UPC8106T RECOMMENDED P.C.B. LAYOUT (Units in mm) 3.10 3 4 0.95 2 5 1 6 0.5 MIN 1.0 MIN 1.0 MIN OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE T06 +0.2 2.8 -0.3 +0.2 1.5 -0.1 LEAD CONNECTIONS (Top View) (Bottom View) C2D 3 4 4 3 2 2.90.2 3 0.95 4 5 5 2 1 1.90.2 2 0.95 5 6 6 1 1 6 -0.05 0.3 +0.10 +0.2 1.1 -0.1 0.8 0.130.1 1. 2. 3. 4. 5. 6. IF INPUT GND LO INPUT POWER SAVE VCC RF OUTPUT 0 to 0.1 Note: All dimensions are typical unless otherwise specified. ORDERING INFORMATION PART NUMBER UPC8106T-E3 QTY 3K/Reel Note: Embossed Tape, 8 mm wide, Pins 1, 2, 3 are in tape pull-out direction. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) * Internet: http://WWW.CEL.COM 7/25/2000 DATA SUBJECT TO CHANGE WITHOUT NOTICE |
Price & Availability of UPC8106T00
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |