 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| File name: TFS140V.doc version 1.1 22.08.2003 VI TELEFILTER Filter specification TFS 140V 1/5 Measurement condition Ambient temperature TA: 23 Input power level: 0 Terminating impedances at fc * ) : input: output: C dBm. 50 // 0 pF 50 // 0 pF Characteristics Remark: Reference level for the relative attenuation a rel of the TFS 140V is the minimum of the pass band attenuation amin . The minimum of the pass band attenuation amin is defined as the insertion loss ae. The reference frequency fc is the arithmetic mean value of the upper and lower frequencies at the 33 dB filter attenuation level relative to the insertion loss ae. The temperature coefficient of frequency Tcf is valid both for the reference frequency fc and the frequency response of the filter in the operating temperature range. The bandwidth shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value tolerance / limit Insertion loss (reference level) Nominal frequency Pass band Pass band ripple ( pp ) Relative attenuation fN fN ... fN 2,45 MHz ... fN MHz MHz MHz MHz ... ... ... ... a e = amin 23 - dB max. 24,25 dB 140,0 MHz PB 0,8 dB fN max. 2,45 MHz 1 dB arel 2,45 MHz 2,7 MHz MHz MHz MHz MHz 0,8 2,2 52 54 55 52 1,8 65 4 Tcf - 18 dB dB dB dB dB dB s ns deg ppm/K max. max. min. min. min. min. max. max. max. 1 3 40 50 40 50 dB dB dB dB dB dB fN + 3,85 fN + 5 fN - 5 fN - 125 fN + 5 fN + 210 fN - 3,9 fN - 5 Group delay ( mean value in PB ) Group delay ripple in PB Phase linearity in PB Temperature coefficient of frequency 2,1 s 100 5 ns deg Frequency deviation of fc over temperature Operating temperature range Storage temperature range fc(Hz) = Tcf(ppm/K) x (T - TA) x fCTA (MHz) + 10 C...+ 70 - 40 C... + 85 C C *) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team. generated: checked / approved: Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. File name: TFS140V.doc version 1.1 22.08.2003 VI TELEFILTER Filter specification TFS 140V 2/5 Construction and pin connection : (all dimensions in mm) 15,32 0,20 TFS 140 V R34 date code 6,50 0,20 1 2 3 4 5 6 7 8 9 10 Input RF return Ground Ground Ground Output Output RF return Ground Ground Ground Input year + week 2001 2002 2003 1,0 0,20 1 120 5 2,0 max. Date code: N P R ... 1,9 0,20 10 7,62 0,20 6 1,91 0,20 50 test circuit 10 5 IN TFS 140V OUT 1, 2, 3, 4, 6, 7, 8, 9 Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. File name: TFS140V.doc version 1.1 22.08.2003 VI TELEFILTER Filter specification TFS 140V 3/5 Stability characteristics : After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Change of temperature 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 -55 C to 125C / 30 min. each / 10 cycles DIN IEC 68 part 2 14 Test N reflow possible: twice max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: DIN IEC 286 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer Tape (all dimensions in mm) W Po Do E F : : : : : 24 4 0,3 0,1 Do Po 2000 min 300 mm min 500 mm min 300 mm EMBOSSED CARRIER TAPE P2 1,5 + 0,1 1,75 0,1 11,5 0,1 0,60 2 12 1,5 7,1 15,9 21,5 0,1 0,1 0,2 0,2 0,1 P1 Ct Bo Ao D1 E G (min) : P2 : P1 : D1(min) : Ao Bo Ct : : : F W G COVER TAPE W2 Reel (all dimensions in mm): A : 330 24,40 +2,0 30,4 60 13 0,5/-0.2 A C N W1 : W2 (max) : N (min) C : : W1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. Markings on the filters can be read if the upper side of the carrier tape is regarded with the sprocket holes on its right. Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. File name: TFS140V.doc version 1.1 22.08.2003 VI TELEFILTER Filter specification TFS 140V 4/5 Air reflow temperature conditions : 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C Air reflow profile 260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. File name: TFS140V.doc version 1.1 22.08.2003 VI TELEFILTER Filter specification TFS 140V 5/5 History : Version 1.0 1.1 Reason of changes generate specification according to customer requirements terminating impedance fixed, typical values and test configuration added Name Pfeiffer Pfeiffer Date 10.04.2003 22.08.2003 Tele Filter GmbH Potsdamer Strae 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: tft@telefilter.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. |
Price & Availability of TFS140V
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |