|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STA15K7.9 thru STA15K100 SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 Designer's Data Sheet FEATURES: * 7.90-100 Volt Unidirectional * Smaller than 704-15K36 and 704-15K36T Types * Hermetically Sealed * Meets all environmental requirements of MIL-PRF-19500 * Custom configurations available * TX and TXV Screening Available 15,000 WATTS PEAK PULSE POWER 7.9 - 100 VOLTS UNIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR APPLICATIONS: *Protection of Voltage Sensitive Components *Protection Against Power Interuption *Lightning Protection MMAXIMUM RATINGS Stand Off Voltage Steady State Power Dissipation Peak Pulse Power @ 1.0 msec Peak Pulse Power and Steady State Power Derating Peak Pulse Power and Pulse Width Peak Pulse Power and Pulse Width VRWM PD PPP 5.6-75 60 V W W 2x O.135 .115 .670.030 .335.030 .43 MAX 15,000 See Graph See Graph -65C to +175C 1.370 1.330 2.00 MAX Note: SSDI Transient Suppressors offer standard Breakdown Voltage Tolerances of + 10% (A) and + 5% (B). For other Voltage and Voltage Tolerances, contact SSDI's Marketing Department .330 .300 PEAK PULSE POWER VS. TEMPERATURE DERATING CURVE PEAK PULSE POWER (% Rated 25C Power) Package shown is standard configuration. SSDI can custom design your module with terminals that meet your unique design criteria. Additionally, SSDI can package these devices with an irregular footprint or offset mounting positions. This data sheet is meant to serve as an example of SSDI's Transient Protection Module Capabilities. For custom configurations, please contact SSDI's Marketing Department. AMBIENT TEMPERATURE (C) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: T00004D STA15K7.9 thru STA15K100 Electrical Characteristics Part Number For 5% Voltage Tolerance specify "B" in place of A SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 Break Down (note 1) Max Reverse Stand Off Peak Pulse Clamping Nominal Voltage Test Current Voltage Reverse Leakage Current Voltage (max) @ Current tp=1ms (note 4) Maximum Continuous Current (note 3) Maximum Temperature Coefficient V BR Volts 7.9 8.9 9.8 10.7 11.0 12.7 13.5 15.0 16.7 18.0 20.2 22.6 24.5 27.9 30.5 34.0 36.0 39.0 45.0 49.0 51.0 57.0 62.0 68.0 75.0 82.0 91.0 100.0 @I RBT A 1.75 1.50 1.50 1.25 1.25 1.00 1.00 0.75 0.75 0.65 0.65 0.50 0.50 0.50 0.40 0.40 0.30 0.30 0.30 0.25 0.25 0.20 0.20 0.20 0.20 0.15 0.15 0.15 VRWM Volts 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 IR @ VRWM mA 16.500 13.200 00.440 00.220 00.165 00.110 00.044 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 00.022 VC Volts 11.7 12.5 13.8 15.0 16.2 17.3 19.0 22.0 23.5 26.5 29.0 31.9 34.7 38.5 42.9 46.9 50.0 55.6 60.0 65.2 71.4 78.9 88.2 93.7 107.1 115.4 125.0 136.4 IPP A 1280 1200 1090 1000 930 870 790 680 640 570 520 470 430 390 350 320 300 270 250 230 210 190 170 160 140 130 120 110 I RM A 12.5 11.5 10.2 9.5 8.6 7.7 7.0 6.0 5.5 5.0 4.4 3.9 3.6 3.1 2.8 2.6 2.4 2.1 1.8 1.75 1.7 1.6 1.5 1.3 1.2 1.1 1.0 .09 TC % / C .03 .03 .03 .05 .05 .05 .05 .05 .06 .06 .06 .06 .06 .06 .06 .06 .06 .06 .06 .07 .07 .07 .07 .08 .08 .08 .08 .09 STA15K7.9 STA15K8.9 STA15K9.8 STA15K10.7 STA15K11.0 STA15K12.7 STA15K13.5 STA15K15.0 STA15K16.7 STA15K18.0 STA15K20.2 STA15K22.6 STA15K24.5 STA15K27.9 STA15K30.5 STA15K34 STA15K36 STA15K39 STA15K45 STA15K49 STA15K51 STA15K57 STA15K62 STA15K68 STA15K75 STA15K82 STA15K91 STA15K100 PEAK PULSE POWER VS. PULSE WIDTH PEAK PULSE POWER (KW) CURRENT PULSE WAVEFORM STEADY STATE POWER STEADY STATE POWER DERATING (% of 25c rated power) % PEAK VALUE CASE TEMPERATURE (C) PULSE WIDTH For optional high reliability screening or higher zener voltages, consult SSDI MARKETING Department. Notes: 1 . All voltages are measured with automated test set using 35 msec test time. Longer or shorter test times will have a corresponding effect on the measured value due to heating effects. 2. Ratings based on 25 C case temperature. 3. Pulse width (tp) is delined as the time from rated peak pulse current IPP to the point where peak pulse current decayed to 50% of rated IPP. |
Price & Availability of STA15K91 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |