|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TOTAL POWER INT'L 40W Single Output Switching Power Supply Features : Universal AC input / Full range Protections:Short circuit/Over load Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 36KHz 2 years warranty S-40 series SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT S-40-5 S-40-12 S-40-15 S-40-24 5V 8A 0 ~ 8A 40W 12V 3.5A 0 ~ 3.5A 42W 100mVp-p 15V 2.8A 0 ~ 2.8A 42W 100mVp-p 13.5 ~ 16.5V 1.0% 0.5% 0.5% 24V 1.8A 0 ~ 1.8A 43W 100mVp-p 21.6 ~ 26.4V 1.0% 0.5% 0.5% RIPPLE & NOISE (max.) Note.2 75mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION 0.5% 10.8 ~ 13.2V 1.0% 0.5% 0.5% LOAD REGULATION SETUP, RISE, HOLD TIME VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY(Typ.) AC CURRENT INRUSH CURRENT(max.) LEAKAGE CURRENT OVER LOAD PROTECTION 1.0% 300ms, 50ms, 60ms/230VAC 800ms, 50ms, 15ms/115VAC at full load 85 ~ 264VAC 47 ~ 63Hz 72%/115VAC 120 ~ 370VDC 76%/115VAC 76%/115VAC 78%/115VAC 1.2A/115VAC 0.6A/230VAC COLD START 30A/115VAC 60A/230VAC <1mA / 240VAC 105 ~ 150% rated output power 5.75 ~ 6.75V OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION EMC (Note 4) HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS NOTE Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.8 ~ 16.2V 17.25 ~ 20.25 Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60 -20 ~ +85 27.6 ~ 32.4V (Refer to output load derating curve) , 10 ~ 95% RH 20 ~ 90% RH non-condensing 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL1012, UL1950, TUV EN60950 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5; ENV50204, EN55024, Light industry level, criteria A DIMENSION PACKING 314.1K hrs min. MIL-HDBK-217F (25 129*98*38mm (L*W*H) 0.45Kg; 30pcs/13.5Kg/0.86CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 40W Single Output Switching Power Supply Mechanical Specification 122.5 S-40 Case No. 903 series Unit:mm 1 9 .5 2 3 8.2 5 3 .5 4.5 73.5 129 6.5 120 9 .5 9 1 8 .5 3 .5 9 3 7 .5 3 -M 3 32 77 Terminal Pin. No Assignment Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. 4 5 Assignment DC OUTPUT -V DC OUTPUT +V Output Derating Static Characteristics (24V) Ta=25 18 9 7 .7 5 33 8 5 .5 4 2- M 3 31 3 .5 7 3 .5 32 100 350 300 250 200 150 100 50 80 OUTPUT VOLTAGE (V) 28 24 20 16 12 8 60 40 20 -10 -10 0 10 20 30 40 50 45 60 55 (VERTICAL) (HORIZONTAL) 60 80 100 120 140 160 180 200 220 240 260 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz OUTPUT RIPPLE (mVp-p) LOAD (%) |
Price & Availability of S-40-5 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |