 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PW084XS1 Version : 1.4 TECHNICAL SPECIFICATION MODEL NO. : PW084XS1 Customer's Confirmation Customer Date By PVI's Confirmation Confirmed By Prepared By FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 http://www.AZDISPLAYS.com Date : May 17,2005 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:1 PW084XS1 TECHNICAL SPECIFICATION CONTENTS NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 - ITEM Cover Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Pixel Arrangement and input connector pin NO. Absolute Maximum Ratings Electrical Characteristics Power Sequence Optical Characteristics Handling Cautions Reliability Test Block Diagram Packing Revision History PAGE 1 2 3 3 3 4 5 6 6 7 17 17 21 22 23 24 25 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2 PW084XS1 1. Application This technical specification applies to 8.4" color TFT-LCD module, PW084XS1. The applications of the panel are car TV, portable DVD, GPS, multimedia applications and others AV system. 2. Features . Pixel in stripe configuration . Slim and compact . High Brightness . Image ReversionUp/Down and Left/Right . Wide Viewing Angle . Support multi display mode (If you use this mode, you must use PVI-1004C's timing controller (mode by PVI)) 3. Mechanical Specifications Parameter Screen Size Display Format Active Area Dot Pitch Pixel Configuration Outline Dimension Surface Treatment Weight Specifications 8.4 (16:9 diagonal) 1440 (H) x234(V) 185.76 (H)x104.60 (V) 0.129(H)x0.447(V) Stripe 199.5(W)x 118.9(H)x 7.4(D)(typ.) Anti-Glare+WV film 2585 Unit Inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 PW084XS1 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 PW084XS1 5. Input / Output Terminals LCD Module Connector FPC Down Connect , 30 Pins , Pitch : 0.5 mm Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol GND VCC NC VEE NC VGH NC STVD STVU CKV U/D OE3 OE2 OE1 VCOM STHL VSS2 VR VG VB VSS1 VDD2 CPH1 CPH2 CPH3 VDD1 R/L NC OEH STHR I/O I I I I/O I/O I I I I I I I/O I I I I I I I I I I I I/O Description Ground for logic circuit Supply voltage of logic control circuit for gate driver No connection Negative power gate driver No connection Positive power for gate driver No connection Vertical start pulse Vertical start pulse Shift clock for gate driver Up / Down Control for gate driver Output enable for gate driver Output enable for gate driver Output enable for gate driver Common electrode voltage Start pulse for source driver Ground for analog circuit Video Input R Video Input G Video Input B Ground for digital circuit Supply power for analog circuit Sampling and shift clock for source driver Sampling and shift clock for source driver Sampling and shift clock for source driver Supply power for digital circuit Left / Right Control for source driver No Connection Output enable for source driver Start pulse for source driver Remark Note 5-3 Note 5-4 Note 5-5 Note 5-1 Note 5-1 Note 5-2 Note 5-6 Note 5-7 Note 5-2 Note 5-2 Note 5-1 U/D STVD Vcc Input GND Output Note 5-2 R/L STHL Vcc output GND input STVU output input scanning direction down to up up to down STHR input output scanning direction left to right right to left The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 PW084XS1 The definitions of Note 5-1,5-2 U/D(PIN 11)=Low R/L(PIN 27)=High U/D(PIN 11)=High R/L(PIN 27)=Low Note 5-3 : VCC TYP.+5V Note 5-4 : VEE TYP.-12V Note 5-5 : VGH TYP.+17V Note 5-6 : VDD2 TYP.+5V Note 5-7 : VDD1 TYP.+5V 6. Pixel Arrangement and input connector pin NO. Line 1 Row 1 Row 2 Row 3 Row 4 R R R R G G G G B B B B R R R R G G G G B B B B R R R R G G G G B B B B R R R R G G G G Line 1440 B B B B Row 233 Row 234 R R G G B B R R G G B B R R G G B B R R G G B B Gate driver Source driver Input FPC Pin 30 Pin 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 PW084XS1 7. Absolute Maximum Ratings The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. Parameter Supply Voltage For Source Driver Symbol VDD2 VDD1 VCC Supply Voltage For Gate Driver VGH-VEE H Level VGH L Level VEE Analog Signal Input Level Storage Temperature Operation Temperature Notes 7-1 : Analog Input Voltage means VR,VG,VB. Notes 7-2 : Optical characteristics shown in Table 10-1 are measured under Ta=+25. VR,VG,VB MIN. -0.3 -0.3 -0.3 -0.3 -0.3 -16 -0.2 -30 -20 MAX. +5.8 +7.0 +6.0 +40.0 +25.0 +0.3 VDD1+0.2 +80 +80 Unit V V V V V V V Note 7-2 Note 7-1 Remark 8. Electrical Characteristics 8-1) Recommended Driving condition for TFT-LCD panel Parameter Supply Driver Voltage For Source Analog Logic H level L level Supply Voltage For Gate Driver Logic Amplitud H level L level H level L level Symbol VDD2 VDD1 VGH VEE DC VEE AC VCC VIH VIL VOH VOL VCOM AC MIN. +4.5 +4.5 +15 -13.0 Typ. +5.0 +5.0 +17 -12 +6.0 MAX. Unit +5.5 V +5.5 V +19 V -10.5 V VP-P V V V V V V Remark DC Component of VEE AC Component of VEE Analog Signal input Level Digital input voltage Digital output voltage +4.5 +5.0 +5.5 +0.3 VCC-0.3 0.7 VDD1 VDD1 -0.3 - 0.3 VDD1 0.7 VDD1 VDD1 -0.3 - 0.3 VDD1 1.6 +6.0 1.8 2.0 VCOM VCOM DC AC Component VP-P of V COM DC Component V of VCOM Note 8-1 Note 8-1 : PVI strongly suggests that the VCOM DC level shall be adjustable , and the adjustable level range is 1.8V1V , every module's VCOM DC level shall be carefully adjusted to show a best image performance. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 PW084XS1 8-2) Back Light driving (JST BHSR-02VS-1 ,Pin No.2) Pin No 1 2 Symbol VL1 VL2 Description Input terminal (Hi voltage side) Input terminal (Low voltage side) Remark Wire color: pink Wire color: white Note 8-2 Note 8-2 : Low voltage side of back light inverter connects with Ground of inverter circuits. Recommended driving condition for back light Parameter Symbol Min. Lamp voltage VL 585 Lamp current IL 4 Lamp frequency PL 40 Vs ) Starting voltage(25 (Reference Value) Vs Starting voltage(0) Ta= 25 Remark Note 8-3 Note 8-4 Note 8-5 Note 8-5 Typ. 637 6 55 Max. 716 8 80 930 1170 Unit Vrms mA KHz Vrms Vrms (Reference Value) Note 8-3 : In order to satisfy the quality of B/L , no matter use what kind of inverter , the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. Note 8-4 : The waveform of lamp driving voltage should be as closed to a perfect sine wave as possible. Note 8-5 : This value is not output voltage of inverter. The voltage of inverter must larger than the starting voltage. The kick-off time must larger than 1 second. 8-3) Power Consumption Parameter Supply current for Gate Driver (Hi level) Supply current for Gate Driver (Low level) Supply current for Source Driver(Digital) Supply current for Source Driver(Analog) Supply current for Gate Driver (Digital) LCD Panel Power Consumption Back Light Lamp Power Consumption Note 8-6 : The power consumption for back light is not included. Note 8-7 : Back light lamp power consumption is calculated by ILxVL. Symbol Conditions IGH VGH +17V IEE IDD1 IDD2 ICC VEE -12V VDD1 +5V VDD2 +5V VCC +5V TYP. 0.11 1.12 1.80 10.5 0.02 76.9 3.82 Ta= 25 MAX Unit Remark 0.17 mA 1.68 4.50 15.0 0.05 120.8 mA mA mA mA mW Note 8-6 W Note 8-7 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 PW084XS1 8-4) Timing Characteristics Of Input Signals Characteristics Symbol Rising time tr Falling time tf High and low level pulse width tCPH CPH pulse duty tCWH STH setup time tSUH STH hold time tHDH STH pulse width tSTH STH period tH OEH pulse width tOEH Sample and hold disable time tDIS1 OEV pulse width tOEV CKV pulse width tCKV Clean enable time tDIS2 Horizontal display start tSH Horizontal display timing range tDH STV setup time tSUV STV hold time tHDV STV pulse width tSTV Horizontal lines per field tV Vertical display start tSV Vertical display timing range tDV VCOM rising time trCOM VCOM falling time tfCOM VCOM delay time tDCOM RGB delay time tDRGB Min. 9.2 30 20 20 61.5 400 400 256 Typ. 9.6 50 1 63.5 1.40 7.43 18 31.75 9.0 0 480 262 3 234 Max. 10 10 10.0 70 65.5 1 268 5 5 3 1 Unit ns ns MHz % ns ns tCPH s s s s s s tCPH/3 tCPH Ns Ns tH tH tH tH s s s s Remark CPH1~CPH3 CPH1~CPH3 STHR,STHL STHR,STHL STHR,STHL STHR,STHL OEH OEV CKV STVR,STVL STVR,STVL STVR,STVL The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 PW084XS1 8-5) Signal Timing Waveforms tf tr 90% 10% 90% 10% tCWH STHL(R) 50% 50% CPH1 tCPH CPH2 (L) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 CPH3 (L) F i g . 8 - 1 S a m p li n g c l o c k ti m i n g tHDH tSUH tSTH PW084XS1 Input (STHL/STHR) Output (STHR/STHL) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 CPH1 Fig. 8-2 Horizontal display timing range tDH PW084XS1 White Blank Black 1H VIA VIAC tH Black The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 V(R,G,B) STHL(R) OE 1,2,3 (HSY) OEH CKV VCOM VIDC VCD C Blank Fig. 8-3 (a) Horizontal timing VCAC White PW084XS1 90% 10% tfCOM STHL(R) OE 1,2,3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 V(R,G,B) (HSY) CKV OEH VCOM Note : The falling edge of OEV should be synchronized with the falling edge of OEH tCKV tDCOM trCOM tOEH 90% 50% tOEV tDIS2 10% tDRGB Fig. 8-3 (b) Detail horizontal timing 1H tDIS1 tSTH PW084XS1 tHDV tCKV STVU(D) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 CKV Fig. 8-4 Vertical shift clock timing tSUV 1H PW084XS1 Vertical timing (From up to down) tsv The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 VCOM (Odd field) VCOM (Even field) V(R,G,B) (HSY) (VSY) STVL Fig. 8-5 (a) Vertical timing (From Up to Down) Display on panel first line PW084XS1 Vertical timing (From down to up) tsv The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 VCOM (Odd field) VCOM (Even field) V(R,G,B) (HSY) (VSY) STVL Fig. 8-5 (b) Vertical timing (From Down to Up) Display on panel first line PW084XS1 9. Power on Sequence The Power on Sequence only effect by VCC, VDD,VEE and VGH, the others do not care. VGH VDD,VCC VSS(0V) VEE OFF ON OFF T1 T2 Logic signal RGB-Video signal T3 T4 1) 10msT1 Contrast Ratio Response time At optimized Viewing angle =0 Brightness Uniformity White Chromaticity Lamp Life Time +25 =0 15 30 ms Note 10-4 25 50 ms 350 400 cd/ Note 10-3 70 75 % Note 10-5 0.270 0.300 0.330 Note 10-3 0.297 0.327 0.357 30000 hrs The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 PW084XS1 Note 10-1 : The definitions of viewing angles Note 10-2 : CR Luminance when Testing point is White Luminance when Testing point is Black (Testing configuration see 10-2 ) Contrast Ratio is measured in optimum common electrode voltage. Note 10-3 : 1. Topcon BM-7(fast) luminance meter 1field of view is used in the testing (after 20~30 minutes operation). 2.Lamp current : 6 mA 3.Inverter model : TDK-347. Note 10-4 : The definition of response time: White 100% 90% Brightness 10% 0% Tr Black White Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 PW084XS1 Note 10-5 : The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 2/6 2/6 1/6 1/6 2/6 2/6 1/6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19 PW084XS1 10-2) Testing configuration BM-7(fast) Caution: 1. Environmental illumination1 lux 2. Before test CR, Vcom voltage must be adjusted carefully to get the best 500mm CR. R,G,B signal input Pattern generator LCD Backlight LCD Display Testing Point Testing Point Pattern A R, G, B Waveform of Pattern A at Testing Point 63.6us 63.6us Pattern B RGB waveform Vcom R, G, B Waveform of Pattern B at Testing Point 63.6us 63.6us RGB waveform Vcom RGB Signal Level =4.0 Vp-p(white to black) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:20 PW084XS1 11. Handling Cautions 11-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirt. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. 11-4) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:21 PW084XS1 12. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) Vibration Test (non-operating) Shock Test (non-operating) Electrostatic Discharge Test (non-operating) Test Condition Ta = +80, 240 hrs Ta = -30, 240 hrs Ta = +80, 240 hrs Ta = -20, 240 hrs Ta = +60, 80%RH, 240 hrs -30+80, 200 Cycles 30 min 30 min Frequency10 ~ 55 HZ Amplitude1 mm Sweep time: 11 mins Test Period: 6 Cycles for each direction of X, Y, Z 100G, 6ms Direction: X, Y, Z Cycle: 3 times 200pF , 0 200V 1 time / each terminal 7 8 9 Ta: ambient temperature Note: The protective film must be removed before temperature test. [Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:22 PW084XS1 13. Block Diagram LCD Panel V Driver (Gate) H Driver (Source) 30 PIN Input Inverter Back-light The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:23 PW084XS1 14. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:24 PW084XS1 Revision History Rev. 1.0 Issued Date Oct. 24, 2003 Revised Contents NEW Modify Page17 : Optical Characteristics (contrast ratio from 150 to 350 Typ.) (contrast ratio from 110 to 200 Min.) Page23: 12. Reliability Test NO.3 Test Item Low Temperature Operation Test change to High Temperature Operation Test Modify Page4: 4.Mechanical Drawing of TFT-LCD Module (Change ground line form 45mm increase length to 100mm) Updata: Page8:Note 8-5 B/L Lamp voltage kick-off time Modify Page4: 4.Mechanical Drawing of TFT-LCD ModuleFPC change (Two piece FPC band to one piece) 1.1 Nov.24, 2003 1.2 1.3 1.4 Apr.1,2004 Oct..4,2004 Jun.17,2004 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:25 |
Price & Availability of PW084XS1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |