 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 05180 PKFC3.3C* thru PKFC36C* PACKAGED FLIP CHIP ARRAY APPLICATIONS Cellular Phones MCM Boards Wireless Communication Circuits IR LEDs SMART & PCMCIA Cards IEC COMPATIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns FEATURES Chip Scale Package 0.050" (1.270mm) x 0.030" (0.762mm) ESD Protection > 25 kilovolts Available in Voltages Ranging From 3.3V to 36V 250 Watts Peak Pulse Power per Line (tp = 8/20s) Bidirectional Configuration & Monolithic Structure Protects 1 Line RoHS Compliant MECHANICAL CHARACTERISTICS Encapsulated 0502 Chip Weight 0.73 milligrams (Approximate) Available in Lead-Free Plating Solder Reflow Temperature: Lead-Free - Sn/Ag/Cu, 96/3.5/0.5: 260-270C Consult Factory for Leaded Device Availability Flammability Rating UL 94V-0 8mm Plastic & Paper Tape and Reel Per EIA Standard 481 Device Marking On Reel PIN CONFIGURATION 05180.R4 2/07 1 www.protekdevices.com *PATENT PENDING PKFC3.3C* thru PKFC36C* DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20s) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TA TSTG VALUE 250 -55 to 150 -55 to 150 UNITS Watts C C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER (See Note 1) DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE @ 25C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS 7.0 9.8 13.4 19.0 24.0 43.0 64.0 MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT (See Note 2) @VWM ID A 75* 10** 10*** 1 1 1 1 TYPICAL CAPACITANCE VWM VOLTS PKFC3.3C PKFC05C PKFC08C PKFC12C PKFC15C PKFC24C PKFC36C 03 05 08 12 15 24 36 3.3 5.0 8.0 12.0 15.0 24.0 36.0 @ 1mA V(BR) VOLTS 4.0 6.0 8.5 13.3 16.7 26.7 40.0 @8/20s VC @ IPP 12.5V @ 20A 14.7V @ 17A 19.2V @ 13A 29.7V @ 9.0A 35.7V @ 7.0A 55.0V @ 5.0A 84.0V @ 3.0A @0V, 1 MHz C pF 150 100 75 50 40 30 25 Note 1: All devices are bidirectional. Electrical characteristics apply in both directions. Note 2: *Typical leakage current < 5A @ 2.8V. **Typical leakage current <500nA @ 3.3V. ***Typical leakage current <200nA @ 5V. FIGURE 1 PEAK PULSE POWER VS PULSE TIME 10,000 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 120 100 80 60 40 20 0 tf FIGURE 2 PULSE WAVE FORM Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8s td = 20s 1,000 250W, 8/20s Waveform e-t 100 td = t I /2 PP 10 0.01 1 10 100 td - Pulse Duration - s 1,000 10,000 0 5 10 15 t - Time - s 20 25 30 05180.R4 2/07 2 www.protekdevices.com *PATENT PENDING PKFC3.3C* thru PKFC36C* GRAPHS 100 80 % Of Rated Power FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20s 60 40 20 Average Power 0 0 25 50 75 100 125 TA - Ambient Temperature - C 150 FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE FOR PKFC05C 35 5 Volts per Division 25 15 5 -5 ESD Test Pulse - 25 kilovolt, 1/30ns (waveshape) 14 VC - Clamping Voltage - Volts FIGURE 5 TYPICAL CLAMPING VOLTAGE VS PEAK PULSE CURRENT FOR PKFC05C 12 10 8 6 4 2 0 0 5 10 IPP - Peak Pulse Current - Amps 15 20 05180.R4 2/07 3 www.protekdevices.com *PATENT PENDING PKFC3.3C* thru PKFC36C* APPLICATION INFORMATION PRINTED CIRCUIT BOARD RECOMMENDATIONS PARAMETER Pad Size on PCB Pad Shape Pad Definition Solder Mask Opening Solder Stencil Thickness Solder Stencil Aperture Opening (laser cut, 5% tapered walls) Solder Paste Type Pad Protective Finish Tolerance - Edge To Corner Ball Solder Ball Side Coplanarity Maximum Dwell Time Above Liquidous (183C) Soldering Maximum Temperature VALUE 0.275mm Round Non-Solder Mask Defined Pads 0.325mm Round 0.150mm 0.330mm Round No Clean OSP(Entek Cu Plus 106A) 50m 20m 60 Seconds 270C REQUIREMENTS Temperature: TP for Lead-Free (SnAgCu): 260-270C TP for Tin-Lead: 240-245C Preheat time and temperature depends on solder paste and flux activation temperature, component size, weight, surface area & plating. RECOMMENDED NON-SOLDER MASK DEFINED PAD ILLUSTRATION Non-Solder Mask Defined Pad 0.275mm DIA. Solder Mask Opening 0.325mm DIA. Solder Stencil Opening 0.330mm DIA. TP Ramp-up Temperature - C Ramp-down TL TSMAX 155 TSMIN 140 TS - Preheat t 25C to Peak 30-60 seconds Ramp-up 15 seconds Solder Time 15-20 seconds Ramp-down 05180.R4 2/07 4 www.protekdevices.com *PATENT PENDING PKFC3.3C* thru PKFC36C* 0502 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE DIM A H C A B C D E F G H J K PACKAGE DIMENSIONS MILLIMETERS MIN 0.73 1.22 0.73 0.54 0.10 0.55 0.27 0.38 0.35 0.35 INCHES MIN 0.029 0.048 0.029 0.021 0.004 0.022 0.011 0.015 0.014 0.014 NOM 0.76 1.27 0.76 0.57 0.13 0.58 0.30 0.41 0.38 0.38 MAX 0.79 1.32 0.79 0.60 0.16 0.61 0.33 0.44 0.41 0.41 NOM 0.030 0.050 0.030 0.023 0.005 0.023 0.012 0.016 0.015 0.015 MAX 0.031 0.052 0.031 0.024 0.006 0.024 0.013 0.017 0.016 0.016 D K TOP B BOTTOM E SIDE J F G NOTES 1. Controlling dimensions in inches. 2. Decimal tolerances for mounting pad : 0.003" ( 0.08mm). 3. Maximum size: 0.052" (1.321mm) by 0.036" (0.914mm). 4. All dimensions 0.003" on package outline. MOUNTING PAD A PAD DIMENSIONS DIM A B C E F G J MILLIMETERS MIN NOM MAX 1.00 0.62 1.44 0.18 0.49 0.31 0.31 1.02 0.64 1.47 0.20 0.51 0.33 0.33 1.04 0.66 1.50 0.22 0.53 0.35 0.35 MIN 0.039 0.024 0.056 0.007 0.019 0.012 0.012 INCHES NOM MAX 0.040 0.025 0.058 0.008 0.020 0.013 0.013 0.041 0.026 0.060 0.009 0.021 0.014 0.014 G B F E C TAPE & REEL ORIENTATION Package Outline J XX Solder Print Diameter 0.010" - 0.012" TAPE & REEL ORDERING NOMENCLATURE Package Contact Pads 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. 8mm Plastic Tape: 7 Inch Reels - 5,000 pieces per reel. Ordering Suffix: -T75-1 (i.e., PKFC05C-T75-1). 3. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PKFC05C-LF-T75-1. NOTE 1. Top view of tape. Solder PADS face down in tape package. Outline & Dimensions: Rev 1 - 8/03, 06040 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7") Tape Width 8mm A0 B0 K0 D E F W P0 P2 P t 1.08 0.05 1.60 0.05 0.72 0.05 1.50 0.10 1.75 0.10 3.50 0.05 8.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10 0.200.025 P0 t D P2 10 Pitches Cumulative Tolerance on Tape. 0.2 E Top cover tape A0 K0 B0 F W P User Direction of Feed COPYRIGHT (c) ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com 05180.R4 2/07 5 www.protekdevices.com *PATENT PENDING |
Price & Availability of PKFC36C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |