 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Product Bulletin OPI155 November 2000 High Speed Optically Coupled Isolator Type OPI155 Dimensions are in inches (millimeters). Features *50 kV electrical isolation *High speed >5MBd *Hermetically sealed LED and photosensor Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Input-to-Output Iso lation Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 kV Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to +85C Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to +85C Lead Soldering Temperature (1/16 inch [1.6 mm] from case for 5 sec. with soldering iron). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Input Diode Continuous Forward Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 V Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mW Output Phototransistor Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 7.0 V Output Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to 18.0 V Output Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA Open Collector Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mW Notes: (1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (2) Derate lin early mW/ above 25C. C (3) Measured with input and output leads shorted and rela tive humidity of less than 50%. This device is susceptible to damage from electrostatic discharge (ESD). Normal static precautions should be taken in the handling of this device to prevent ESD damage. Description The OPI155 contains a high speed monolithic photo-IC comprised of a photodiode and DC amplifier driving an open collector output Schottky transistor. It is optically coupled by means of an internal light pipe and mounted in a high dielectric plastic housing. The LED and sensor are in hermetically sealed packages. It is designed for applications requiring high speed and high voltage isolation between input and output. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 13 (972) 323-2200 Fax (972) 323-2396 Type OPI155 Electrical Characteristics (TA = 25o C unless otherwise noted) SYMBOL Input Diode VF IR Forward Voltage Reverse Current High Level Output Current High Level Supply Current Low Level Supply Current Low Level Output Voltage 1.2 .1 1.55 100 V A IF = 10 mA VR = 3.0 V VO = 18 V, I F = 0, VCC = Open VCC = 5.25 V, IF = 0, VO = Open VCC = 5.25 V, IF = 10 mA, VO = 0 VCC = 5.25 V, IF = 10 mA, IO = 8 mA VCC = 5 V, I F = 10 mA, RL = 360 VCC = 5 V, I F = 10 mA, RL = 360 PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Output Sensor IOH I CCH ICCL VOL 250 6.5 10 0.50 A mA mA V Switching Characteristics Tphl Tplh Propagation Delay, high to low Propagation Delay, low to high 120 70 150 100 ns ns Optek re serves the right to make changes at any time in order to improve design and to supply the best product possi ble. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972)323-2200 Fax (972)323-2396 14 |
Price & Availability of OPI155
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |