|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Cree(R) Mini-Dorado LED Model # LD-300CBGL2-C5 Data Sheet 3 x 3 mm, QFN-type, high-power, blue LED for illumination, clear-compound encapsulated Applications * * * * High-luminous-flux output for illumination Exposed-pad design for excellent heat transfer Designed for high-current operation Reflow soldering applicable Absolute Maximum Ratings (TA = 25C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction-to-Ambient Junction-to-Case Note 2 Note 1 Symbol IF IFP VR PD Topr Tstg TJ JA JC Absolute Maximum Rating 100 150 5 0.48 -40 ~ +85 -40 ~ +85 +110 135 70 Unit mA mA V W C C C C/W C/W Note 2 1. 2. Notes: Pulse width 0.1 msec, duty 1/10. Rth test condition: mounted on 1.7 mm, Al-based PCB in size of 12 x 12 mm Typical Electrical & Optical Characteristics at TA = 25C (on metal core PCB) Characteristics Forward Voltage Reverse Current Symbol VF IR D lumen 21/2H-H 21/2V-V Condition IF = 100 mA VR = 5 V IF = 100 mA IF = 100 mA IF = 100 mA IF = 100 mA Unit V A nm lm deg deg 460 1 470 2.3 125 115 Minimum Typical 4.0 Note Maximum 4.8 10 480 D-CT140.000 Data Sheet: CL Dominant Wavelength Luminous Flux 50% Power Angle Note: A metal core PCB has an effective heat-transmission substrate (thickness of 1.7 mm, Al-based PCB in 12 x 12 mm, JC <50C/W should suffice). Subject to change without notice. www.cree.com/ledlamps Standard Bins for LD-300CBL2-C5 (IF = 00 mA) Lamps are sorted to luminous flux (lm), VF and dominant wavelength (D) bins shown. Orders for LD-300CBL2-C5 may be filled with any or all bins contained as below. All luminous flux (lm), VF and dominant wavelength (D) values shown and specified are at IF = 100 mA. 5.2 lm G or above F Luminous Flux (lm) 4 lm E 3 lm D 2.2 lm C 1.5 lm B 1 lm 460 nm Dominant Wavelength (D) 480 nm Forward Voltage (VF) Rank Voltage V5a 3.2-3.4 V V5b 3.4-3.6 V V6a 3.6-3.8 V V6b 3.8-4.0 V V7a 4.0-4.2 V V7b 4.2-4.4 V V8a 4.4-4.6 V V8b 4.6-4.8 V Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous flux is 10%. 4. Tolerance of measurement of dominant wavelength is 1 nm. 5. Tolerance of measurement of VF is 0.01 V. 6. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 7. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 8. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT40.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs Graphs If (mA) 120.0 100.0 80.0 60.0 40.0 20.0 0.0 Vf(V) 2.8 3.2 3.6 4.0 4.4 4.8 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Document No. SPE/LD-300CBL2-C5 Rev. No. 04 1.2 RELATIVE LUMINOUS FLUX 1.0 0.8 0.6 0.4 0.2 0.0 0.0 If(mA) 20 40 60 80 100 120 Half Power G L=28nm W Domi WL=470nm 100% 75% 50% 25% 0% 400 500 600 700 800 WL(nm) FIG.2 FORWARD CURRENT. FIG.3 RELATIVE LUMINOUS FLUX VS. WAVELENGTH. IF(mA) 120 100 80 60 40 20 0 T ( X) C 0 20 40 60 80 100 -90 -60 -30 0 30 60 90 50% Power Angle : H-H: 125X V-V: 115X Ie(%) 100% 80% H-H V-V 0 ja=135X /W C 60% 40% 20% 0% FIG.4 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 X C FIG.5 FAR FIELD PATTERN Items Prepared by Checked by Approved by FCN# Signatures WangFeng Jiao WangXM David Date 2006-8-28 2006-8-28 2006-8-28 Rev.No 02 03 04 Date Revision History Change Description 2006-05-17 Change VF MAX from 4.4V to 4.8V 2006-08-11 Added a lumen bin: 3-5 lm 2006-8-28 Change lumen bin range and rank from A,B to B,C,D, E,F Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps FCN20060295 Data is subject to change without prior notice. please refer to COTCO Website for the latest version. Copyright (c) 2007 Cree, Inc. Cotco International Ltd. Copyright@2002 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 3 CLD-CT40.000 Mechanical Dimensions All dimensions are in mm. SIDE VIEW A B C TOP VIEW A : ANODE B : HEAT SINK C : CATHODE BACK VIEW Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 CLD-CT40.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = Tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LD-300CBL2-C5-00001 Description MD 125 Blue 470nm, FULL RANK, Tape and Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT40.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps |
Price & Availability of LD-300CBGL2-C5 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |