 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PRODUCT SPECIFICATION DATE: 08/11/2004 NO. 61L30005 SHEET 1 OF 9 cosmo ELECTRONICS CORPORATION SMD LED : KL-150UYG UNIT:MM REV. 1 TOLERANCE: 0.25 Part No. Emitting Color Material Lens Type Iv (IF=20mA) MIN (mcd) 30 TYP (mcd) 60 Viewing Angle 21/2 120 KL-150UYG Super brightness green AlGaInP Water Clear PRODUCT SPECIFICATION DATE: 08/11/2004 NO. 61L30005 SHEET 2 OF 9 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : KL-150UYG QG VR IF IFP Pd TOP TST TA TSTG Absolute maximum ratings (TA=25) Reverse voltage Forward current Forward current(Peak) 1/10 Duty Cycle,0.1ms Pulse Width Green (AlGaInP) 5 30 100 50 -40~+85 -40~+85 -40~+85 -40~+85 Unit V mA mA mW Power dissipation LED LAMPS: Operating temperature Storage temperature LED DISPLAYS: Operating temperature Storage temperature Operating characteristics (TA=25) Forward voltage(typ.) IF=20mA Forward voltage(max.) IF=20mA Reverse current(max.) VR=5V Wavelength at dominant emission(typ.) IF=20mA Wavelength at peak emission(typ.) IF=20mA Spectral line half-width IF=20mA Capacitance VF=0V,f=1MHz VF VF IR D QG Green (AlGaInP) 2.2 2.6 10 575 574 25 20 Unit V V uA nm nm nm pF P C PRODUCT SPECIFICATION DATE: 08/11/2004 NO.61L30005 SHEET 3 OF 9 REV. 1 cosmo ELECTRONICS CORPORATION 50 SMD LED : KL-150UYG Luminous Intensity Relative Value at IF=20mA Forward Current(mA) 40 30 3.0 2.5 2.0 1.5 1.0 0.5 0 0 10 20 30 40 50 20 10 0 1.5 1.7 1.9 2.1 2.3 2.5 Forward Voltage(V) Forward Current Vs. Forward Voltage IF-Forward Current(mA) Luminous Intensity Vs. Forward Current Forward Current IF (mA) 50 40 Relative Luminous Intensity 0 20 40 60 80 100 30 2 1.5 1 0.5 0 -30 20 70 120 20 10 0 Ambient Temperature TA() Forward Current Derating Curve Ambient Temperature TA() Luminous Intensity Vs. Ambient Temperature PRODUCT SPECIFICATION DATE: 08/11/2004 NO. 61L30005 SHEET 4 OF 9 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : KL-150UYG 0 10 20 30 1.0 40 50 60 70 80 90 0.5 0 0.5 View Angle 21/2=120 PRODUCT SPECIFICATION DATE: 08/11/2004 NO. 61L30005 SHEET 5 OF 9 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : KL-150UYG UNIT:MM TOLERANCE: 0.25 TYPE PACKAGE:2000 OR 1000PCS/REEL REEL"T":14mmTYP PRODUCT SPECIFICATION DATE: 08/11/2004 NO. 61L30005 SHEET 6 OF 9 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : KL-150UYG UNIT:MM The following soldering patterns are recommended for reflow-soldering: For reflow soldering PRODUCT SPECIFICATION DATE: 08/11/2004 NO. 61L30005 SHEET 7 OF 9 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : KL-150UYG UNIT:MM TOLERANCE: 0.25 PRODUCT SPECIFICATION DATE: 08/11/2004 NO. 61L30005 SHEET 8 OF 9 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : KL-150UYG SOLDERING SMT REFLOW SOLDERING INSTRUCTIONS 10 Temp ( C) 230 4 C/sec max 140~160 C 4 C/sec max sec MAX TEMPERATURE 60~120sec 35sec MAX Time SOLDERING INSRTUCTIONS DIP AND WAVE SOLDERING TYPES TEMPERATURE OF THE SOLDERING BATH MAXLMUM SOLDERING TIME IRON SOLDERING(WITH 1.5mm IRON TIP) MAXLMUM DISTANCE FROM SOLDERING SOLDER JOINT TO CASE TIME DISTANCE FORM TEMPERATURE OF SOLDERING SOLDER JOINT IRON TO CASE 260 LEDS 3S 5S 3S 2mm 4mm 2mm 260 260 260 3S 5S 3S 2mm 4mm 2mm 260 DISPLAYS 260 PRODUCT SPECIFICATION DATE: 08/11/2004 NO. 61L30005 SHEET 9 OF 9 REV. 1 cosmo ELECTRONICS CORPORATION SMD LED : KL-150UYG SMD HANDLING AND APPLICATION PRECAUTIONS STORAGE (1.1)It is recommended to store the devices in accordance with the following conditions: Humidity: 60%RH Max. Temperature: 5~30 (41~86) (1.2)Shelf life in sealed bag: 12 month at <5~30 and <30%RH. After the package is opened, the products should be used within 72hrs. Or they should be kept at 20%RH in zip -locked sealed bags. DRY PACK AND BAKING SMD LEDs are MOISTURE SENSITIVE devices. Avoid absorbing moisture at any time during transportation and/or storage. It is recommended to bake before soldering when the pack is unsealed after 72 hrs, or any suspicious moisture being found. Bake devices in accordance with the following conditions: (a) (b) (c) 603 1003 1303 x (12~24hrs) and <5%RH, taped reel type x (45min~1hr), loose packing type, or x (15~30min), loose packing type ELECTRIC STATIC DISCHARGE(ESD) PROTECTION Materials with GaN, InGaN, AlInGaP are STATIC SENSITIVE devices. They will be packed in anti-static bags. ESD protection must be deliberatively observed from the initial design stage. The static -electric discharge may result in severe malfunction of the devices. In the events of manual working in process, make sure the devices are well protected from ESD at any time. Surge before and during handling products. |
Price & Availability of KL-150UYG
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |