View HSU200-T_1251474.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AUTO-RANGING AC INPUT AC-DC MULTIPLE OUTPUT 200 WATTS 19" COMPATIBLE DOUBLE EUROCARD SWITCHING POWER SUPPLIES HSU200 SERIES
FEATURES:
AUTO-RANGING AC INPUT 19" COMPATIBLE EUROCARD FORMAT MEET THE SAFETY STANDARDS EMI MEET CISPR PUB.22 & FCC CLASS A CE MARKING COMPLIANCE 12HP X 6U X160MM DOUBLE EUROCARD VMEbus STANDARD
TOTAL POWER INT'L
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Auto-ranging 115Vac(90-132Vac) and 230Vac(180-264Vac). Transient threshold typ. 150Vac. Input Connector: DIN 41612 at rear. Input Frequency: 47-63Hz Inrush Current: Typ. 65.0A @ 230Vac. Input Current: Typ. 3.3A/115Vac & 1.6A/230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet CISPR PUB.22 or FCC Class A. Hold-up Time: Typ. 26mS. Power OK: Installed Remote Inhibit: Installed. Over Temp. Protection (OTP): Installed (Thermostate). Power-On LED: Installed. Earth leakage: Typ. 0.3 mA @230Vac.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 200 Watts. Output Connector: DIN 41612 at rear. Line Regulation: Typ. 0.2%. Load Regulation: Main VO1 typ. 1.0%. Aux. VO2 typ. 1-2.0%(MA). Aux. VO3 typ. 2-3.0%(PR). Aux. VO4 typ. 2-3.0%(PR). Noise & Ripple: Typ. 1% peak to peak. OVP: Available at main VO1 & Aux.VO2.(latch). Adjustability: Available at VO1 & VO2. Remote Sense: Installed at main VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. Typ. 130% full load. Consult the factory for OLP setting. Output LED Indicators: Installed for all outputs. Operating Temperature: 0 to +50C at full load. Derate linearly to +70C at half load. Storage Temperature: -20 to +85C. Temperature Coefficient: Typ. 0.04%/C. Cooling: Free air convection. Construction format: 12HPx6U compatible double Eurocard VMEbus standard.
GENERAL SPECIFICATION
Efficiency: Typ. 76-77.0%. Switching Frequency: Typ. 100K Hz. Circuit Topology: Forward circuit. Transient Response: Output voltage returns in less than 1.5mS following a 25% load change. Safety Standard: IEC950/UL1950 Class I. Power Density: 1.30 Watt / Cubic Inch.
Note: All measurements are at nominal input, full load, and +25C unless otherwise specified.
TOTAL POWER, INT. Tel: 877-646-0900 Fax: 978-453-7395 Email: sales@total-power.com http://www.total-power.com -1-
OUTPUT VOLTAGE/CURRENT RATINGS CHART
TRIPLE OUTPUT
MODEL NO. HSU200-T050II
(HSU200-32)
MAIN VO1 @# Typ. Volt. 20.0A 20.0A 20.0A 25.0A 5.0V 5.0V 5.0V 3.3V
AUX. VO2 @ Typ. Volt. 7.0A 3.5A 18.0A 17.0A 12.0V 24.0V 3.3V 5.0V
AUX. VO3 Typ. Volt. 1.0A 1.0A 1.0A 1.0A 12.0V 12.0V 12.0V 12.0V AUX. VO4 Typ. Volt. 1.0A 1.0A 1.0A 1.0A +12.0V +12.0V +12.0V +12.0V
HSU200-T050MI
(HSU200-33)
HSU200-T050DI HSU200-T033EI
QUAD OUTPUT
MODEL NO. HSU200-Q050III
(HSU200-40)
MAIN VO1 @# Typ. Volt. 20.0A 20.0A 20.0A 25.0A
"@" Adjustable.
AUX. VO2 @ Typ. Volt. 6.0A 3.0A 15.0A 14.0A +12.0V +24.0V +3.3V +5.0V
AUX. VO3 Typ. Volt. 1.0A 1.0A 1.0A 1.0A -12.0V -12.0V -12.0V -12.0V
+5.0V +5.0V +5.0V +3.3V
HSU200-Q050MII
(HSU200-42)
HSU200-Q050DII HSU200-Q033EII
Symbol: " " OVP built-in.
"#" Remote sensing.
"" Magnetic Amplifier.
"" Post Regulator.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 2.43Kg (5.35lb.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTS
AC INPUT TRIPLE/QUAD OUTPUT ASSORTED SIGNAL
SYS LOG. VO1 VO1 Reset INH. S(+) S(-)
ASSIGNMENT AC-L AC-N AC-G HSU200-T HSU200-Q
+VO1
+VO2
-VO3 +VO4 -
DC COM P2-18,20,22,24,26
NC
AC Fail P1-4 P1-4
P1-10,12,14,16,18 P1-8 P2-14 P2-32 P1-6 20,22,24,26 P1,10-12,24,16,18 P1-28 P1-30 P1-32 P2-4,6,8,10 P2-28,30 P2-16 P2-12 P2-18,20,22,24,26 P1-8 P2-14 P2-32 P1-6 20,22,24,26 P1-28 P1-30 P1-32 P2-4,6,8,10 P2-28,30 P2-16
Mating connector: DIN41612-H15 Female
TOTAL POWER, INT. Tel: 877-646-0900 Fax: 978-453-7395 Email: sales@total-power.com http://www.total-power.com -2-

▲Up To Search▲

Price & Availability of HSU200-T

	To Download HSU200-T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .