View GHB-0805DU-Y_1244633.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

55 Commerce Way
Woburn, MA 01801 (781) 935 - 4442 (781) 938 - 5867 www.gilway.com
GHB-0805DU-Y GHB-0805DU-O GHB-0805DU-R GHB-0805DU-R2
DIFFUSED EPOXY 0.3 (0.012) PC BOARD
LED DIE
CATHODE MARK
1.25 (0.049)
2.0 (0.079E)
0.62 (0.024)
1.4 (0.055)
POLARITY
CATHODE LINE 0.4 0.15 (0.016 0.006)
0.8 (0.031) 0.3 (0.012) 0.4 0.15 (0.016 0.006)
Description These chip-type LEDs utilize Aluminum Indium Gallium Phosphide (AlInGaP) material technology. The AlInGaP material has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. The available colors in this surface mount series are 592 nm Amber, 605 nm Orange, 626 nm Red for AS AlInGaP and 631 nm red for TS AlInGaP.
SOLDERING TERMINAL
Device Selection Guide Footprint (mm)[1,2] AS AlInGaP Amber AS AlInGaP Orange AS AlInGaP Red TS AlInGaP Red GHB0805DU-R2 Package Description Untinted, Diffused
2.0 x 1.25 x 0.8 GHB-0805DU-Y
GHB-0805DU-O GHB-0805DU-R
Notes: 1. Dimensions in mm. 2. Tolerance 0.1 mm unless otherwise noted.
T Absolute Maximum Ratings A = 25C GHB-0805DU-Y GHB-0805DU-O GHB-0805DU-R
[1,2]
Parameter DC Forward Current Power Dissipation Reverse Voltage (I mA) R = 100 LED Junction Temperature Operating Temperature Range Storage Temperature Range Soldering Temperature
GHB-0805DU-R2 30 81 5 95 30 to +85 40 to +85 See IR soldering profile (Figure 7)
Units mA mW V C C C
30 75 5 95 30 to +85 40 to +85
Notes: 1. Derate linearly as shown in Figure 4. 2. Drive currents above 5 mA are recommended for best long term performance.
Electrical Characteristics TA = 25C Forward Voltage VF (Volts) @ I = 20 mA F Typ. Max. 1.9 1.9 1.9 2.2 2.4 2.4 2.4 2.6 Reverse Breakdown V R (Volts) @RI = 100 A m Min. 5 5 5 5 Capacitance C (pF), VF = 0, f = 1 MHz Typ. 45 45 45 35 Thermal Resistance R J-PIN = q (C/W) Typ. 300 300 300 300
Parameter Number GHB-0805DU-Y GHB-0805DU-O GHB-0805DU-R GHB-0805DU-R2
Optical Characteristics TA = 25C Luminous Intensity I v (mcd) [1] @ 20 mA Min. Typ. 25 25 25 40 90 90 90 165 Peak Wavelength lpeak (nm) Typ. 595 609 637 643 Color, Dominant Wavelength ld[2] (nm) Typ. 592 605 626 631 Viewing Luminous Angle Efficacy 2 q1/2 hv Degrees[3] (lm/w) Typ. Typ. 170 170 170 170 480 370 155 122
Part Number GHB-0805DU-Y GHB-0805DU-O GHB-0805DU-R GHB-0805DU-R2
Color AS Amber AS Orange AS Red TS Red
Notes: 1. The luminous intensity, I v, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, ld , is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. q 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
1.0
IF FORWARD CURRENT mA
100
AS AlInGaP AMBER RS AlInGaP AED
AS AlInGaP
RELATIVE INTENSITY
AS AlInGaP ORANGE 0.5 TS AlInGaP RED
10
1
TS AlInGaP
0
500
550
600
650
700
750
0.1
1.5
1.7
1.9
2.1
2.3
2.5
WAVELENGTH nm
IF MAX. MAXIMUM FORWARD CURRENT mA
V F FORWARD VOLTAGE V
1.4 1.2
LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
35 30 25 20 RqJ-A = 800C/W 15 RqJ-A = 600C/W 10 5 0 0 20 40 60 80 100 RqJ-A = 500C/W
1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30
IF FORWARD CURRENT mA 1.00
0.90
RELATIVE INTENSITY
TA AMBIENT TEMPERATURE C
0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0 -90 -80 -70 -60 -50 -40 -30 -20 -10
0 10 20 30 40 50 60 70 80 90
ANGLE
1.2 (0.047)
1.2 (0.047)
1.2 (0.047)
0.9 (0.035)
Recommended soldering pattern for GHB-0805DU-Y/O/R/R2

▲Up To Search▲

Price & Availability of GHB-0805DU-Y

	To Download GHB-0805DU-Y Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .