|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MINIATURE RELAY (SURFACE MOUNT TYPE) 2 POLES--1 to 2 A (FOR SIGNAL SWITCHING) FBR18 SERIES N s FEATURES q q q q q q s ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f) (g) (h) (i) s SAFETY STANDARD AND FILE NUMBERS UL508, 1950, 114 (File No. E63615) C22.2 No. 0, No. 14 (File No. LR40304 or LR64026) Nominal voltage 3 to 24 VDC Note: The designation name is stamped on the top of the relay case as follows: (Example) designation ordered : FBR18ND05 Stamp : 18ND05 FO DE R FB NE SI GN BE R1 W 8N S DI SC D/H ON D TO EX TIN CE FB IE PT D R1 8W D 2 form C small size,surface mounting relay. Super miniature size: 0.2 inch x 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom relay. UL, CSA recognized. High dielectric and surge strength: 2.5 KV surge (per Bellcore TA-NWT-001089) 1.5 KV surge (per FCC part 68) 1,000 Vrms, open contacts Low power consumption: 80 mW operate 140 mW nominal Tape and reel packing for automatic mounting. FBR18 N (a) (b) D (c) 12 (d) -P -M -** (e) (f ) (g) s (-CSA) -s (h) (i) Series Name Enclosure FBR18 : FBR18 Series [2 pole double throw (2 form C)] N : Plastic sealed (washable type) Coil Type D : DC coil Nominal Voltage Refer to the COIL DATA CHART Nil -P Contact Material : Gold-overlay silver-nickel : Gold-overlay silver-palladium : Standard : High density mounting Terminal Nil -M Custom Designation CSA Standard To be assigned custom specification -CSA: UL114 + CSA recognized Packing Nil : Tape and reel (500 pieces/tape and reel) Contact rating 2 A 30 VDC resistive 0.3 A 110 VDC resistive 0.5 A 125 VAC resistive OT FBR18 SERIES s SPECIFICATIONS Item Contact Arrangement Material Style Resistance (initial) Rating (resistive) Standard (Gold-overlay silver-nickel) 2 form C (DPDT) -P type (Gold-overlay silver-palladium) Maximum Carrying Current Maximum Switching Power Max. Switching Voltage*1 NO Bifurcated 2A Gold-overlay silver-nickel Gold-overlay silver-palladium Maximum 100 m (at 0.1 A 6 VDC) 0.5 A 125 VAC or 1 A 30 VDC 2 A (at 20C) 62.5 VA or 60 W Maximum Switching Current Minimum Switching Load*2 Capacitance (at 10 kHz) NE GN BE R1 W 8N S DI SC D/H ON D TO EX TIN CE FB IE PT D R1 8W D Approximately 1.0 pF (between open contacts, adjacent contacts ) Approximately 1.0 pF (between coil and contacts) Approximately 0.14 W (0.2 W for 24 V coil) Coil Nominal Power (at 20C) Operate Power (at 20C) Maximum 0.08 W (0.112 W for 24 V coil) Approximately 115C/W FB DE 45 to 85%RH 250 VAC or 220 VDC TF SI 0.01 mA 10 mVDC (reference) OR Thermal Resistance at Continuous Thermal Load Operating Temperature Operating Humidity -40C to +85C (no frost) (refer to the CHARACTERISTIC DATA) Time Value Operate (at nominal voltage) Maximum 4 msec. Release (at nominal voltage) Max. Switching Frequency Resistance (initial) Maximum 4 msec. Mechanical 3 Hz or electrical 0.5 Hz (at contact rating) Minimum 1,000 M (at 500 VDC) Insulation Dielectric between open contacts Strength adjacent contacts between coil and contacts 1,000 VAC 1 minimum 1,500 750 10 700 1,500 VAC 1 minimum 1,500 V (at 10 x 700 s) 2,500 V (at 2 x 10 s) Surge between open Strength contacts, adjacent contact 2,500 1,250 2 10 between coil and contacts Life Mechanical 1 x 108 operations minimum 2 x 105 operations minimum Electrical (at contact rating) DC 5 x 105 operations minimum AC 1 x 105 operations minimum 2 x 105 operations minimum Other Vibration Resistance Shock Resistance Weight Misoperation Endurance 10 to 55 Hz (double amplitude of 1.5 mm) 10 to 55 Hz (double amplitude of 3.0 mm) 1,000 m/s2 (11 1 ms) Misoperation Endurance 500 m/s2 (111 ms) Approximately 1.9 g *1 *2 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. Values when switching a resistive load at normal room temperature and humidity and in a clean atmosphere. The minimum switching load varies with the switching frequency and operation environment. 2 FBR18 SERIES s COIL DATA CHART FBR-18 N type MODEL Standard FBR18ND03 FBR18ND04 FBR18ND05 FBR18ND06 FBR18ND09 FBR18ND12 FBR18ND24 -P type FBR18ND03-P FBR18ND04-P FBR18ND05-P FBR18ND06-P FBR18ND09-P Nominal Coil current resistance (at nominal voltage) (10%) approx. 64.3 145 178 257 579 1,028 2,880 46 mA 31 mA 28 mA Must operate1 voltage* Must release 1 voltage* Coil temperature rise Nominal voltage 3 VDC 4.5 VDC NO Nominal power Operate power 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20C. FBR-18 W type *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20C. s CHARACTERISTIC DATA xim Ma Nominal voltage multiplying Ffactor (%) 150 140 130 120 110 100 90 80 70 2.0 Service life (operations) Contact load current (A) NE GN BE R1 W 8N S DI SC D/H ON D TO EX TIN CE FB IE PT D R1 8W D FBR18ND24-P 8 mA FB -P type FBR18ND12-P DE 39 88 108 156 352 TF 23 mA 15 mA 11 mA 75% max. 10% min. Approx. 0.14 W of nominal of nominal (at nominal voltage voltage voltage) SI OR Must release1 voltage* Approx. 0.08 W Max. Approx. 20 deg (at nominal voltage) 0.2 W 0.112 W 30 deg MODEL Nominal voltage 3 VDC Coil resistance (10%) Must operate1 voltage* Nominal power Operate power Coil temperature rise Standard FBR18WD03 FBR18WD04 FBR18WD05 FBR18WD06 FBR18WD09 FBR18WD12 FBR18WD24 FBR18WD03-P FBR18WD04-P FBR18WD05-P FBR18WD06-P FBR18WD09-P FBR18WD12-P FBR18WD24-P 4.5 VDC 5 VDC 6 VDC 9 VDC 75% max. 10% min. Approx. 0.23 W of nominal of nominal (at nominal voltage voltage voltage) Approx. 0.13 W Max. Approx. 30 deg (at nominal voltage) 12 VDC 626 24 VDC 2,304 0.25 W 0.14W 33 deg Range of operation temperature and voltage 160 um Maximum switching capacity Life curve (x104) 500 (DATA) assumes that the maximum allowable temperature of E type insulation coil is 115C le c v oil ge olta AC resistive load ( AC contact rating) DC resistive load ( DC contact rating) Operating voltage range Mus t op erate ge volta -10 0 10 20 30 40 50 60 70 80 Operating temperature (C) b wa allo 1.0 100 50 30 V DC resistive load (-P)TYPE 0.5 0.3 0.2 10 5 125 V AC resistive load (-P)TYPE 0.1 1 0.5 1.0 1.5 2.0 10 20 30 50 125 200 Contact load voltage (V) Contact load current (A) 3 FBR18 SERIES s REFERENCE DATA Distribution of operate and release voltage 60 Operate Release 50 Distribution of operate and release time 100 Distribution of contact resistance 80 Distribution (%) Distribution (%) 40 60 30 40 20 20 10 0 0 10 20 s DIMENSIONS NE GN BE R1 W 8N S DI SC D/H ON D TO EX TIN CE FB IE PT D R1 8W D Rated coil voltage multiplying factor (%) Time (ms) FB 30 40 50 60 0 70 80 0 DE 1 2 3 4 TF 5 6 7 Distribution (%) NO 80 Operate Release 60 40 8 SI 12 - + 1 OR 20 0 0 10 20 30 40 50 60 70 80 Contact resistance (m) qDimensions Standard (FBR18 type) qSchematics (TOP VIEW) qPC board mounting pad layout (TOP VIEW) 14.7+0.3 7.4+0.1 1 10 9 8 10.15+0.2 1.45 0.25 34 5 5.08 2.54 2.54 5.08 2.54 2.54 (1.0) 5.08 8.9+0.1 High density mounting (FBR18-M type) 7.4+0.1 14.7+0.3 1 10.35+0.2 1.65 0.25 + 1 34 5 5.08 2.54 2.54 5.08 2.54 2.54 (1.0) 5.08 7.4+0.1 Unit: mm 2.2 6.49 4 12 - 10 9 8 2.73 7.02 FBR18 SERIES s RECOMMENDED SOLDERING CONDITIONS (TEMPERATURE PROFILE) IRS (Infrared Reflow Soldering) VPS (Vapor Phase Soldering) Temperature (C) T3 T2 T1 preheating soldering T 3 = 245C max. T 2 = 200C max. cooling T 1 = 165C max. Temperature (C) NO 0 120 sec maximum s PACKING (1) Quantity of 1 reel : 500 pieces (2) Dimensions (in mm) * REEL DIMENSIONS NE GN BE R1 W 8N S DI SC D/H ON D TO EX TIN CE FB IE PT D R1 8W D Note: 1.Temperature profiles show the temperature of PC board surface. 2.Please perform soldering test with your actual PC board before mass production, since the temperatures of PC board surfaces vary according to the size of PC board, status of parts mounting and heating method. FB 30 sec Max. DE TF T3 T2 T1 0 215C maximum soldering cooling T 3 = 200C maximum T 2 = 165C maximum T 1 = 100C maximum preheating SI 60 sec Max. OR 60 sec Max. 90 sec Max. * Packing orientation code: B Feeding Orientation mark side * TAPE DIMENSIONS Note: Relays are sold in packs of 500 pieces, please order 500 pieces as 1 unit. 5 FBR18 SERIES Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info.marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com Fujitsu Components International Headquarter Offices NO NE GN BE R1 W 8N S DI SC D/H ON D TO EX TIN CE FB IE PT D R1 8W D SI 6 (c) 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 FB DE TF OR |
Price & Availability of FBR18WD24-P |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |