View AME111707_1209485.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AME, Inc.
AME1117
n General Description
The AME1117 is a 1A low-dropout positive voltage regulator. It is available in fixed and adjustable output voltage versions. Overcurrent and thermal protection are integrated onto the chip. Output current will limit as while it reaches the pre-set current or temperature limit. The dropout voltage is specified at 1.4V Maximum at full rated output current. The AME1117 series provides excellent regulation over line, load and temperature variations.
1A Low Dropout Positive Voltage Regulator
n Functional Block Diagram
Input
Current Limiting Amplifier
Thermal Protection
Output
n Features
l Low Dropout Voltage ----- 1.4V at 1A l Adjustable or Fixed Voltages: 1.8V, 2.5V, 3.3V, 5.0V l Adjust Pin Current Less than 120A l Overcurrent Protection l Thermal Protection l Available in TO-220, TO-252, SOT-223 l All AME's Lead Free Products Meet RoHS Standards
Error Amp. Bandgap Reference
ADJ/COM
n Typical Application
VIN
AME1117
GND
VOUT
n Applications
l High Efficiency Linear Regulators l Post Regulators for Switching Supplies l 5V to 3.3V Voltage Converter l Battery Charger
10F Tan
10F Tan
Load
Rev.S.02
1
AME, Inc.
AME1117
n Pin Configuration
TO-220-3 Front View AME1117 1. ADJ / GND 2. OUT (TAB) 3. IN * Die Attach: Conductive Epoxy
1A Low Dropout Positive Voltage Regulator
SOT-223 Front View AME1117 1. ADJ / GND 2. OUT (TAB) 3. IN * Die Attach: Conductive Epoxy
AME1117
1 2 3
AMExxxx AME1117
1
2
3
TO-252-2 Front View AME1117 1. ADJ / GND 2. OUT (TAB) 3. IN * Die Attach: Conductive Epoxy
AME1117
1
2
3
2
Rev.S.02
AME, Inc.
AME1117
n Ordering Information AME1117 x x x x x
Special Feature Number of Pins Package Type Operating Ambient Temperature Range Product Grade or Option
1A Low Dropout Positive Voltage Regulator
Product Grade or Option
Operating Ambient Temperature Range
Package Type
Number of Pins
Special Feature
A: B: C: D: E:
ADJ 2.5V 3.3V 5.0V 1.8V
C: 0OC to 70OC
B: TO-220 C: TO-252 G: SOT-223
T: 3
Z: Lead Free
Rev.S.02
3
AME, Inc.
AME1117
n Ordering Information (contd.)
Part Number
AME1117ACGT AME1117ACGTZ AME1117BCGT AME1117BCGTZ AME1117CCGT AME1117CCGTZ AME1117DCGT AME1117DCGTZ AME1117ECGT AME1117ECGTZ AME1117ACCT
1A Low Dropout Positive Voltage Regulator
Marking*
ABEyww ABEyww AKEyww AKEyww ABFyww ABFyww AKFyww AKFyww AXHyww AXHyww AME1117 ACCT yyww AME1117 ACCT yyww AME1117 BCCT yyww AME1117 BCCT yyww AME1117 CCCT yyww AME1117 CCCT yyww
Output Voltage
ADJ ADJ 2.5 2.5 3.3 3.3 5.0 5.0 1.8 1.8 ADJ
Package
SOT-223 SOT-223 SOT-223 SOT-223 SOT-223 SOT-223 SOT-223 SOT-223 SOT-223 SOT-223 TO-252-2
Operating Ambient Temperature Range
0oC to 70oC 0oC to 70oC 0oC to 70oC 0oC to 70oC 0oC to 70oC 0oC to 70oC 0oC to 70oC 0oC to 70oC 0oC to 70oC 0oC to 70oC 0oC to 70oC
AME1117ACCTZ
ADJ
TO-252-2
0oC to 70oC
AME1117BCCT
2.5
TO-252-2
0oC to 70oC
AME1117BCCTZ
2.5
TO-252-2
0oC to 70oC
AME1117CCCT
3.3
TO-252-2
0oC to 70oC
AME1117CCCTZ
3.3
TO-252-2
0oC to 70oC
Note: yyww & yww represent the date code * A line on top of the first letter represents lead free plating such as AME1117. Please consult AME sales office or authorized Rep./Distributor for the availability of output voltage and package type.
4
Rev.S.02
AME, Inc.
AME1117
n Ordering Information
Part Number
AME1117DCCT
1A Low Dropout Positive Voltage Regulator
Marking*
AME1117 DCCT yyww AME1117 DCCT yyww AME1117 ECCT yyww AME1117 ECCT yyww AME1117 ACBT yyww AME1117 ACBT yyww AME1117 BCBT yyww AME1117 BCBT yyww AME1117 CCBT yyww AME1117 CCBT yyww AME1117 DCBT yyww AME1117 DCBT yyww AME1117 ECBT yyww AME1117 ECBT yyww
Output Voltage
5.0
Package
TO-252-2
Operating Ambient Temperature Range
0oC to 70oC
AME1117DCCTZ
5.0
TO-252-2
0oC to 70oC
AME1117ECCT
1.8
TO-252-2
0oC to 70oC
AME1117ECCTZ
1.8
TO-252-2
0oC to 70oC
AME1117ACBT
ADJ
TO-220
0oC to 70oC
AME1117ACBTZ
ADJ
TO-220
0oC to 70oC
AME1117BCBT
2.5
TO-220
0oC to 70oC
AME1117BCBTZ
2.5
TO-220
0oC to 70oC
AME1117CCBT
3.3
TO-220
0oC to 70oC
AME1117CCBTZ
3.3
TO-220
0oC to 70oC
AME1117DCBT
5.0
TO-220
0oC to 70oC
AME1117DCBTZ
5.0
TO-220
0oC to 70oC
AME1117ECBT
1.8
TO-220
0oC to 70oC
AME1117ECBTZ
Rev.S.02
1.8
TO-220
0oC to 70oC
5
AME, Inc.
AME1117
n Absolute Maximum Ratings
Parameter
Thermal Resistance* (Junction to Case)
1A Low Dropout Positive Voltage Regulator
Package
TO-220-3 TO-252-2 SOT-223 TO-220-3
Die Attach
Conductive Epoxy
Symbol
Maximum
6
Unit
JC
5 25
o
C/W
55 Conductive Epoxy
Thermal Resistance (Junction to Ambient)
TO-252-2 SOT-223 TO-220-3
JA
90 120 2200
Internal Power Dissipation
TO-252-2 SOT-223
Conductive Epoxy
PD
1200 900
mW
Input Voltage Operating Junction Temperature Range Storage Temperature Range Solder Iron (10 Sec)**
VIN TJ TSTG
12 0 to 125 -65 to 150 350
V
o
C C C
o
o
Caution: Stress above the listed absolute maximum rating may cause permanent damage to the device. * Measure JC on backside center of tab. ** MIL-STD-202G 210F
6
Rev.S.02
AME, Inc.
AME1117
n Electrical Specifications
AME1117Exxx
Parameter Output Voltage Line Regulation Load Regulation Dropout Voltage Current Limit Quiescent Current Temp. Coefficient Temperature Stability RMS Output Noise Ripple Rejection Ratio Symbol VOUT REGLINE REGLOAD VDROPOUT IS IQ TC TS VN RA Test Condition VIN = 5V, IO = 0A V IN = 4.75V to 7V, IO = 0A VIN = 5V, IO = 0A~1A IO = 1A, Vo = 1% VIN = 4.75V to 7V VIN = 5V, IO = 0A to 1A VIN = 5V, IO = 100mA 10HZ <= f <=10KHZ VIN = 5V, IO = 1A TJ =25 C TJ =0 C to 70 C TJ =0oC to 70oC TJ =0 C to 70 C TJ =0oC to 70oC TJ =0oC to 70oC TJ =0 C to 70 C TJ =0 C to 70 C TJ =25 C TJ =0 C to 70 C
o o o o o o o o o o o o
1A Low Dropout Positive Voltage Regulator
Min
Typ
Max
Units V
1.782 1.800 1.818 1.764 1.800 1.836 1.0 60 0.1 1.2 1.5 6.0 0.005 0.5 0.003 72 0.2
% 1.0 1.4 13 V A mA %/C % %VO dB
VIN = 4.75V to 7V, IO = 0A to 1A
AME1117Dxxx
Parameter Output Voltage Line Regulation Load Regulation Dropout Voltage Current Limit Quiescent Current Temp. Coefficient Temperature Stability RMS Output Noise Ripple Rejection Ratio Symbol VOUT REGLINE REGLOAD VDROPOUT IS IQ TC TS VN RA Test Condition VIN = 7V, IO = 0A VIN =7V to 9V, IO = 0A VIN = 7V IO = 0A~1A IO = 0A to 1A, Vo = 1% VIN = 7V to 10V VIN = 7V, IO = 0A to 1A VIN = 5V, IO = 100mA 10HZ <= f <=10KHZ VIN = 5V, IO = 1A TJ =25 C TJ =0 C to 70 C TJ =0oC to 70oC TJ =0 C to 70 C TJ =0oC to 70oC TJ =0oC to 70oC TJ =0 C to 70 C TJ =0oC to 70oC TJ =25 C TJ =0 C to 70 C
o o o o o o o o o o
Min
Typ
Max
Units V
4.950 5.000 5.050 4.900 5.000 5.100 1.0 60 0.1 1.2 1.5 6.0 0.005 0.5 0.003 72 0.2
% 1.0 1.4 13 V A mA %/C % %VO dB
VIN = 7V to 10V, IO = 0A to 1A
Rev.S.02
7
AME, Inc.
AME1117
n Electrical Specifications
AME1117Cxxx
Parameter Output Voltage Line Regulation Load Regulation Dropout Voltage Current Limit Quiescent Current Temp. Coefficient Temperature Stability RMS Output Noise Ripple Rejection Ratio Symbol VOUT REGLINE REGLOAD VDROPOUT IS IQ TC TS VN RA Test Condition VIN = 5V, IO = 0A V IN = 4.75V to 7V, IO = 0A VIN = 5V IO = 0A to 1A IO = 0A to 1A, Vo = 1% VIN = 4.75V to 7V VIN = 5V, IO = 0A to 1A VIN = 5V, IO = 100mA 10HZ <= f <=10KHZ VIN = 5V, IO = 1A TJ =25 C TJ =0 C to 70 C TJ =0oC to 70oC TJ =0 C to 70 C TJ =0oC to 70oC TJ =0oC to 70oC TJ =0oC to 70oC TJ =0 C to 70 C TJ =25 C TJ =0 C to 70 C
o o o o o o o o o o
1A Low Dropout Positive Voltage Regulator
Min
Typ
Max
Units V
3.270 3.300 3.330 3.234 3.300 3.366 1.0 60 0.1 1.2 1.5 6.0 0.005 0.5 0.003 72 0.2
% 1.0 1.4 13 V A mA %/C % %VO dB
V IN = 4.75V to 7V, IO = 0A~1A
AME1117Bxxx
Parameter Output Voltage Line Regulation Load Regulation Dropout Voltage Current Limit Quiescent Current Temp. Coefficient Temperature Stability RMS Output Noise Ripple Rejection Ratio Symbol VOUT REGLINE REGLOAD VDROPOUT IS IQ TC TS VN RA Test Condition VIN = 5V, IO = 0A VIN = 4.75V to 7V, IO = 0A VIN = 5V IO = 0A to 1A IO = 0A to 1A, Vo = 1% VIN = 4.75V to 7V VIN = 5V, IO = 0A to 1A VIN = 5V, IO = 100mA 10HZ <= f <=10KHZ VIN = 5V, IO = 1A TJ =25 C TJ =0 C to 70 C TJ =0oC to 70oC TJ =0 C to 70 C TJ =0oC to 70oC TJ =0oC to 70oC TJ =0 C to 70 C TJ =0 C to 70 C TJ =25oC TJ =0oC to 70oC
o o o o o o o o o
Min
Typ
Max
Units V
2.475 2.500 2.525 2.450 2.500 2.550 1.0 60 0.1 1.2 1.5 6.0 0.005 0.5 0.003 72 0.2
% 1.0 1.4 13 V A mA %/C % %VO dB
VIN = 4.75V to 7V, IO = 0A~1A
8
Rev.S.02
AME, Inc.
AME1117
n Electrical Specifications
AME1117Axxx
Parameter Reference Voltage Line Regulation * Load Regulation Dropout Voltage Current Limit Temp. Coefficient Adjust Pin Current Adjust Pin Current Change Temperature Stability Minimum Load Current RMS Output Noise Ripple Rejection Ratio Symbol VREF REGLINE REGLOAD VDROPOUT IS TC IADJ IADJ TS IO VN RA Test Condition VIN = 5V, IO = 10mA VIN = 4.75V to 7V, IO = 10mA VIN = 5V, IO = 10mA to 1A IO = 10mA to 1A, Vo = 1% VIN = 2.7V to 7V VIN = 2.75V to 7V, IO = 10mA to 1A VIN = 2.75V to 7V, IO = 10mA to 1A VIN = 5V, IO = 100mA V IN = 5V 10HZ <= f <=10KHZ VIN = 5V, IO = 1A TJ =25 C TJ =0 C to 70 C
o o o
1A Low Dropout Positive Voltage Regulator
Min TJ =25 C
o o o
Typ
Max
Units V
1.238 1.250 1.262 1.225 1.250 1.275 1.0 60 0.1 1.2 1.5 0.005 55 0.2 0.5 5.0 0.003 72 10 0.2
TJ =0 C to 70 C TJ =0oC to 70oC TJ =0 C to 70 C TJ =0oC to 70oC TJ =0oC to 70oC
o o
% 1.0 1.4 120 A TJ =0oC to 70oC TJ =0oC to 70oC 5.0 % mA %VO dB V A %/C
VIN = 2.75V to 7V, IO = 10mA to 1A TJ =0oC to 70oC
*Line regulation test circuit
VIN IN ADJ OUT 100
VOUT
10F Tan
164
10F Tan
Rev.S.02
9
AME, Inc.
AME1117
n Application Description
1. Output Voltage Adjustment Like most regulators, the AME1117 regulates the output by comparing the output voltage to an internally generated reference voltage. On the adjustable version, the VREF is available externally as 1.25V between VOUT and ADJ. The voltage ratio formed by R1 and R2 should be set to conduct 10mA (minimum output load). The output voltage is given by the following equation: R2 VOUT = VREF ( 1 + ) + IADJ x R2 R1 On fixed versions of AME1117, the voltage divider is provided internally. 3. Current Limit Protection AME1117 is protected against overload conditions. Current protection is triggered at typically 1.5A. 4. Stability and Load Regulation AME1117 requires a capacitor from VOUT to GND to provide compensation feedback to the internal gain stage. This is to ensure stability at the output terminal. Typically, a 10F tantalum or 50F aluminum electrolytic is sufficient.
(Note: It is important that the ESR for this capacitor does not exceed 0.5.)
1A Low Dropout Positive Voltage Regulator
VIN IN ADJ C1 IADJ 55A OUT VREF
VOUT
The output capacitor does not have a theoretical upper limit and increasing its value will increase stability. COUT = 100F or more is typical for high current regulator design. For the adjustable version, the best load regulation is accomplished when the top of the resistor divider (R1) is connected directly to the output pin of the AME1117. When so connected, RP is not multiplied by the divider ratio. For fixed output versions, the top of R1 is internally connected to the output. The ground pin can be connected to the low side of the load in order to eliminate ground loop errors.
RP Parasitic Line Resistance IN ADJ R1 (Connect R1 to case) RL OUT
R1
R2
VOUT = VREF (1+R2 ) + IADJ x R2 R1
2. Thermal Protection AME1117 has thermal protection which limits junction temperature to 150oC. However, device functionality is only guaranteed to a maximum junction temperature of +125oC. The power dissipation and junction temperature for AME1117 is given by PD = (VIN - VOUT) x IOUT TJUNCTION = TAMBIENT + ( PD x JA) Note: T JUNCTION must not exceed 125oC
VIN
R2
Connect R2 to load
10
Rev.S.02
AME, Inc.
AME1117
5. Thermal Consideration The AME1117 series contain thermal limiting circuitry designed to protect itself from over-temperature conditions. Even for normal load conditions, maximum junction temperature ratings must not be exceeded. As mentioned in thermal protection section, we need to consider all sources of thermal resistance between junction and ambient. It includes junction-to-case, case-to-heat-sink interface and heat sink thermal resistance itself. Junction-to-case thermal resistance is specified from the IC junction to the bottom of the case directly below the die. Proper mounting is required to ensure the best possible thermal flow from this area of the package to the heat sink. The case of all devices in this product series is electrically connected to the output. Therefore, if the case of the device must be electrically isolated, a thermally conductive spacer is recommended.
1A Low Dropout Positive Voltage Regulator
Rev.S.02
11
AME, Inc.
AME1117
n Advanced Applications (contd.)
Adjustable Output Voltage
1A Low Dropout Positive Voltage Regulator
VIN = 5V
VIN
AME1117
ADJ
VOUT
* VO = 1.5 - 3.45V
10F ** 10F
R1 1K R2 2K
10F
Note: * VOUT = VREF ( 1 +
) + IADJ x R2 R1 ** Optional for improved ripple rejection Paralleling Regulators
R2
VIN VIN
VOUT
AME1117
GND
VOUT * 20m IO = 0 to 2A
10F
10F
VIN
AME1117
GND
VOUT * 20m
Note: * 20m is ballast resistance The inter - connection of #18 wire could act as ballast resistance
12
Rev.S.02
AME, Inc.
AME1117
n Advanced Applications
Regulator with Reference
VIN VIN * VO
1A Low Dropout Positive Voltage Regulator
AME1117
GND
VOUT
10F 1K ** 10F Zener diode or voltage reference
10F
Note: * VO = VREF + VZ (VZ: breakdown voltage of Zener diode) ** Optional for improved ripple rejection
Regulator with Reverse Diode Protection
VIN
VIN
AME1117
GND
VOUT
*VO
10F
10F
Rev.S.02
13
AME, Inc.
AME1117
Temperature Stability (For Fixed Voltage)
1A Low Dropout Positive Voltage Regulator
Temperature Stability (For Adjustable Voltage)
0.00
1.252 1.250
Output Voltage deviation (%)
IO=0mA
-0.05
IO=10mA
Reference Voltage (V)
1.248 1.246 1.244 1.242 1.240
-0.10
-0.15
-0.20
-0.25 -50 -30 -10 10 30 50 70 90
1.238 -50
-25
0
25
50
75
100
125
Temperature
(oC)
Temperature
(oC)
Short Circuit Current
3.0
Dropout Voltage
1.25 1.20
Output Short Circuit Current (A)
TJ=25OC
2.5
TJ=25OC
Drop-out Voltage (V)
1 2 3 4 5 6 7 8 9 10
1.15 1.10 1.05 1.00 0.95 0.90 0 0.2 0.4 0.6 0.8 1
2.0
1.5
1.0
0.5
0.0
Input/Output Differential Voltage(V)
Load Current (A)
Adjust Pin Current
45 40
7
Minimum Operating Current
Minimum Operation Current (mA)
6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 9
Adjust Pin Current (A)
35 30 25 20 15 10 5 0 -50
TJ=25OC
-25
0
25
50
75
100
125
Temperature ( oC)
Input/Output Differential Voltage(V)
14
Rev.S.02
AME, Inc.
AME1117
Load Transient Response
Output Voltage Deviation (V)
0.1 0 -0.1
1A Low Dropout Positive Voltage Regulator
Line Transient Response
30mV 0 -30mV
CIN=10F VO COUT=10F COUT=1F COUT=0F
TJ=25OC
VO Deviation
TJ=25OC
Load Current(A)
2 1 0
IO
VIN=5V VO=3.3V Preload=100mA
6V 5V
CIN=CO=1mF, IO=0.1A, VO=3.3V VIN
0.0
25
50
Time (S)
Time (S)
Rev.S.02
15
AME, Inc.
AME1117
n Tape and Reel Dimension
TO-252-2
P
1A Low Dropout Positive Voltage Regulator
PIN 1
W
Carrier Tape, Number of Components Per Reel and Reel Size
Package TO-252-2
Carrier Width (W) 16.00.1 mm
Pitch (P) 4.00.1 mm
SOT-223
P
AME PIN 1
Carrier Tape, Number of Components Per Reel and Reel Size
Package SOT-223
Carrier Width (W) 12.00.1 mm
Pitch (P) 4.00.1 mm
16
AME
AME
Part Per Full Reel 2500pcs
Reel Size 3301 mm
W AME
Part Per Full Reel 2500pcs
Reel Size 3301 mm
Rev.S.02
AME, Inc.
AME1117
n Package Dimension
SOT-223
Top View D B1 Side View
1A Low Dropout Positive Voltage Regulator
SYMBOLS
c C
MILLIMETERS MIN
0.01 0.60 2.90 0.24 6.30 3.30 1.40
INCHES MIN
0.0004 0.0236 0.1140 0.0094 0.2480 0.1299 0.0551
MAX
0.10 0.84 3.15 0.38 6.71 3.71 1.80
MAX
0.0039 0.0330 0.1240 0.0150 0.2640 0.1460 0.0709
A1 B B1 C D E F
13o(4X) H E
e Front View F A1 B 13o(4X)
e H
2.30 BSC 6.70 0
o
0.0906 BSC 0.2638 0
o
7.30 10
o
0.2874 10 o
TO-220-3
Top View O M I N G
SYMBOLS A C D E G I
Side View
MILLIMETERS MIN
5.58 2.03 0.50 0.30 9.65 3.53 0.50 1.14 2.28 12.70 14.22
INCHES MIN
0.2197 0.0800 0.0197 0.0118 0.3799 0.1390 0.0197 0.0449 0.0898 0.5000 0.5600
MAX
7.49 4.83 1.40 1.15 10.67 4.09 1.15 1.78 2.80 14.74 16.51
MAX
0.2949 0.1902 0.0550 0.0453 0.4200 0.1610 0.0453 0.0700 0.1102 0.5803 0.6500
K
P
K M
D A
C
E
N O P
Rev.S.02
17
AME, Inc.
AME1117
n Package Dimension
TO-252-2
SYMBOLS
Top View E K B A Side View
1A Low Dropout Positive Voltage Regulator
MILLIMETERS MIN
0.43 1.60 0.51 0.43 6.35 5.36 2.20 5.20
INCHES MIN
0.0169 0.0630 0.0200 0.0169 0.2500 0.2110 0.0866 0.2047
MAX
0.58 1.95 1.78 0.60 6.80 7.20 3.00 * 2.30 0.97 5.50
MAX
0.0230 0.0768 0.0701 0.0236 0.2677 0.2835 0.1181 *0.0906 0.0380 0.2165
A B C
L
D E F
F
G H J K
G
C
L
1.40REF
0.055REF
J H D
*: Typical Value Notes: 1. Controlling dimension: Millimeters. 2. Maximum lead thickness includes lead finish thickness Minimum lead thickness is the minimum thickness of base material.
18
Rev.S.02
www.ame.com.tw
E-Mail: sales@ame.com.tw
Life Support Policy: These products of AME, Inc. are not authorized for use as critical components in life-support devices or systems, without the express written approval of the president of AME, Inc. AME, Inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. (c) AME, Inc. , July 2007 Document: 1014-DS1117-S.02
Corporate Headquarter
AME, Inc.
2F, 302 Rui-Guang Road, Nei-Hu District Taipei 114, Taiwan. Tel: 886 2 2627-8687 Fax: 886 2 2659-2989
U.S.A.(Subsidiary)
Analog Microelectronics, Inc.
3100 De La Cruz Blvd., Suite 201 Santa Clara, CA. 95054-2438 Tel : (408) 988-2388 Fax: (408) 988-2489

▲Up To Search▲

Price & Availability of AME111707

	To Download AME111707 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .