 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20857 10/04 60CTQ150PBF SCHOTTKY RECTIFIER 60 Amp IF(AV) = 60Amp VR = 150V Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 s sine VF TJ @ 30 Apk, TJ= 125C typical range Description/ Features Units A V A V The 60CTQ150PBF center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175 C TJ operation Center tap TO-220 package High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Values 60 150 710 0.69 (per leg) - 55 to 175 C Case Styles 60CTQ150PBF Base Common Cathode 2 1 Anode 2 Common Cathode 3 Anode TO-220 www.irf.com 1 60CTQ150PBF Bulletin PD-20857 10/04 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 60CTQ150PBF 150 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR * See Fig. 5 (Per Leg) (Per Device) * See Fig. 7 60CTQ Units 30 60 710 270 0.4 0.9 A mJ A A Conditions 50% duty cycle @ TC = 137C, rectangular wave form 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied Max. Peak One Cycle Non-Repetitive Surge Current (Per Leg) Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) TJ = 25 C, IAS = 0.9 Amps, L = 1 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Typ. 0.83 0.98 0.67 0.82 Max. Units 0.88 1.09 0.72 0.87 75 20 650 7.5 10000 V V V V A mA pF nH V/ s Conditions @ 30A @ 60A @ 30A @ 60A TJ = 25 C TJ = 125 C @ 25C TJ = 25 C TJ = 125 C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) * See Fig. 2 Typical Junction Capacitance (Per Leg) Typical Series Inductance (Per Leg) 7 7.2 - VR = 5VDC (test signal range 100kHz to 1Mhz) Measured lead to lead 5mm from package body (Rated VR) (1) Pulse Width < 300s, Duty Cycle < 2% dv/dt Max. Voltage Rate of Change Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range to Case (Per Leg) * See Fig. 4 RthJC Max. Thermal Resistance Junction to Case (Per Package) RthCS Typical Thermal Resistance, Case to Heatsink wt Approximate Weight T Mounting Torque Marking Device Min. Max. 0.25 6 (0.21) 6 (5) 12 (10) 0.6 C/W DC operation 60CTQ Units -55 to 175 -55 to 175 1.2 C C Conditions RthJC Max. Thermal Resistance Junction C/W DC operation C/W Mounting surface , smooth and greased g (oz.) Kg-cm (Ibf-in) 60CTQ150 2 www.irf.com 60CTQ150PBF Bulletin PD-20857 10/04 1000 Reverse Current - IR (mA) 100 10 1 0.1 0.01 0.001 Tj = 175C 150C 125C 100C 75C 50C 25C Instantaneous Forward Current - I F (A) 100 0 20 40 60 80 100 120 140 160 Reverse Voltage - V R (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 Tj = 125C 10 Tj = 175C Tj = 125C Tj = 25C Junction Capacitance - CT (pF) 1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 100 0 40 80 120 160 Forward Voltage Drop - V FM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 10 Thermal Impedance Z thJC (C/W) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 1 0.1 PDM t1 0.01 Single Pulse (Thermal Resistance) t2 Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.001 0.00001 0.0001 0.001 0.01 0.1 t1 , Rectangular Pulse Duration (Seconds) 1 10 Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 60CTQ150PBF Bulletin PD-20857 10/04 180 Allowable Case Temperature (C) 35 Average Power Loss (Watts) 170 160 150 140 130 120 Square wave (D = 0.50) 80% Rated Vr applied 110 100 see note (2) 90 0 5 10 15 20 25 30 35 40 45 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive Surge Current - I FSM (A) 30 25 20 15 10 5 0 0 DC RMS Limit D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 DC 5 10 15 20 25 30 35 40 45 Average Forward Current - I F(AV) (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 1000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L HIGH-S PEED S CH WIT FREE-WHEEL DIODE 40HF L40S 02 + DUT IR FP460 R = 25 ohm g Vd = 25 Volt CURR ENT MONIT OR Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 60CTQ150PBF Bulletin PD-20857 10/04 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 123 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) 0.10 (0.004) 1 1.32 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2 1.22 (0.05) Base Common Cathode 2 2.92 (0.11) 2.54 (0.10) TERM 2 Anode 2 Common Cathode 3 Anode 123 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. Conform to JEDEC outline TO-220AB Dimensions in millimeters and (inches) Part Marking Information IRXC Assembly Line EXAMPLE: THIS IS A 60CTQ150 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" PART NUMBER INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE DATE CODE P = LEAD-FREE YEAR 1 = 2001 WEEK 19 LINE C IRMX Assembly Line EXAMPLE: THIS IS A 60CTQ150 LOT CODE 1789 ASSEMBLED ON WW 19, 2001 INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR 1 = 2001 WEEK 19 P = LEAD-FREE www.irf.com 5 60CTQ150PBF Bulletin PD-20857 10/04 Ordering Information Table Device Code 60 1 C 2 T 3 Q 4 150 PbF 5 6 1 2 3 4 5 6 - Current Rating (60 = 60A) Circuit Configuration C = Common Cathode Package T = TO-220 Schottky "Q" Series Voltage Rating (150 = 150V) none = Standard Production PbF = Lead-Free Tube Standard Pack Quantity : 50 pieces Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 10/04 6 www.irf.com |
Price & Availability of 60CTQ150PBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |