|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
3 x 5mm Rectangular (R) Optopipe(R) Optical Light Pipe, 2 Array (RJ45 Jack) 19.05 [.750] 13.98 [.550] 2.54 [.100] FRONT P ANE L 5.08 [.200] 2 PLCS DIFFUSED FRONT SURF CE A 31.24 [1.23] 515-1070 29.0 [1.142] 3.05 [.120] 1.91 [.075] Recommended MicroLED SMT LEDs for use with 515-1070 PART NO. 3.93 [.155] 20.57 [.81] 3.56 [.140] COLOR Red AlGaAs Red AlGaAs Red Orange Orange Green Green Yellow Yellow Red/Green Red/Green Yellow/Green Yellow/Green Red/Yellow PAGE # 1-19 1-19 1-30 1-19 1-30 1-19 1-30 1-19 1-30 1-20 1-31 1-20 1-31 1-20 3.66 [.144] C.L. LED S 27.94 [1.100] 35.26 [1.388] .71 [.028] 1.50 [.059] .99 [.039] .99 [.039] DIRECTIO N OF LIGHT 27.43 [1.080] C.L. MOUNTIN G PIN #1 7.62 .15 [.300 .006] 1.57 [.062] 1.57 [.062] 2.01 [.079] 2X O 2.87 .05 [.113 .002] 6.99 [.275] 1.35 [.053] 13.98 [.550] 27.94 .05 [1.100 .002] NOTE: designed for post-reflow PC board insertion. RECOMMENDED SOLDP D/HOLES LA ER A YOUT FOR BI-COLOR LED S Dimensions in mm [inches] Features * Complements Dialight's 515-1022 Four Array Optopipe Light Pipe * Allows indicators to be positioned above corresponding RJ45 jack or D-Subminiature * High transmissivity polycarbonate material * UL94V-0 compliance * ESD protection (circuit isolation from front panel) * Wide viewing angle * Arrays reduce insertion costs * Secures to PCB by press-fit 597-3001-1xx 597-3111-1xx 597-3111-5xx 597-3211-1xx 597-3211-5xx 597-3301-1xx 597-3301-5xx 597-3401-1xx 597-3401-5xx 597-7701-1xx 597-7701-5xx 597-7721-1xx 597-7721-5xx 597-7731-1XX LED Data For absolute maximum ratings and other electrical and optical data on the recommended LEDs, refer to LED data sheets. Operating/Storage Temperature -30C to +100C Dialight Optopipe(R) Light Pipe Description This light pipe's two 3 x 5mm rectangular light emitting surfaces appear bright and are optically well isolated. The light pipe is reliably held in place by 2 press-fit pins located at either end of the light pipe array. This Optopipe(R) functions as a through-the-case indicator by conducting the light over the top of connectors or switches. A textured finish on the 2 light emitting surfaces maximizes the viewing angle. The recommended light sources are Dialight's 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The LEDs are mounted in a straight line on an 0.550" pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index. Dialight can provide custom Optopipe(R) solutions for your applications. Dialight Corporation * 1501 Route 34 South * Farmingdale, NJ 07727 * TEL: (732) 919-3119 * FAX: (732) 751-5778 *www.dialight.com |
Price & Availability of 597-7731-1XX |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |