 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20555 rev. B 02/03 30L30CT 30L30CTS 30L30CT-1 SCHOTTKY RECTIFIER 30 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM VF TJ @ 15 Apk, TJ = 125C (Per Leg) range - 55 to 150 C 30 0.37 V V Description/ Features Units A This center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150 C TJ operation Center tap configuration Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Values 2 x 15 Case Styles 30L30CT 30L30CTS 30L30CT -1 Base Common Cathode 2 Base Common Cathode 2 Base Common Cathode 2 1 Anode 2 Common Cathode 3 1 Anode Anode 2 Common Cathode 3 1 Anode Anode 2 Common Cathode 3 Anode TO-220 www.irf.com D2PAK TO-262 1 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 Voltage Ratings Parameters VR Max. DC Reverse Voltage (V) 30L30CT 30L30CTS 30L30CT-1 30 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR Surge Current Non-Repetitive Avalanche Energy (Per Leg) Repetitive Avalanche Current (Per Leg) 2 A Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Per Device Per Leg Values 30 15 1450 220 15 Units Conditions A A mJ 50% duty cycle @ TC = 140C, rectangular wave form 5s Sine or 3s Rect. pulse Following any rated load condition and Max. Peak One Cycle Non-Repetitive 10ms Sine or 6ms Rect. pulse with rated VRRM applied TJ = 25 C, IAS = 2 Amps, L = 7.5 mH Electrical Specifications Parameters VFM Max. Forward Voltage Drop (Per Leg) (1) Values 0.46 0.57 0.37 0.50 1.50 350 1500 8.0 10000 Units Conditions V V V V mA mA pF nH V/s @ 15A @ 30A @ 15A @ 30A TJ = 25 C TJ = 125 C TJ = 25 C TJ = 125 C VR = rated VR IRM CT LS Max. Reverse Leakage Current (Per Leg) Max. Junction Capacitance(Per Leg) Typical Series Inductance (Per Leg) VR = 5VDC (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body (Rated VR) dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range Values -55 to 150 -55 to 150 1.5 0.8 2 (0.07) Min. Max. 6 (5) 12 (10) Units Conditions C C C/W DC operation C/W DC operation g (oz.) Kg-cm (Ibf-in) RthJC Max. Thermal Resistance Junction to Case (Per Leg) RthJC Max. Thermal Resistance Junction to Case (Per Package) wt T Approximate Weight Mounting Torque 2 www.irf.com 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 000 (mA) 000 T = 150C J 100 10 1 0.1 0.01 0 5 10 15 20 125C 100C 75C 50C 25C Instantaneous Forward Current - I F (A) 100 Reverse Current - I R 25 30 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 10000 (pF) T = 150C T = 25C J J T = 25C Junction Capacitance - C T = 125C T 10 J J 1000 1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 0 5 10 15 20 25 30 35 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 10 (C/W) thJC Thermal Impedance Z 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t 2 2. Peak Tj = Pdmx ZthJC + Tc 0.1 .01 0.00001 0.0001 0.001 0.01 0.1 1 10 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics www.irf.com 3 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 50 Allowable Case Temperature (C) Average Power Loss (Watts) 10 8 6 4 2 0 0 5 10 15 20 (A) F(AV) 45 DC RMS Limit DC DC = 0.20 DC = 0.25 DC = 0.33 DC = 0.50 DC = 0.75 40 35 Square wave (D = 0.50) see note (2) 30 0 5 10 15 20 25 Average Forward Current - I (A) F(AV) 25 Average Forward Current - I Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics (A) FSM 10000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge Non-Repetitive Surge Current - I 1000 100 10 100 1000 p 10000 (microsec) Square Wave Pulse Duration - t Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) (2) Formula used: TC = TJ - Pd x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6) 4 www.irf.com 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 123 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) 1 2 Common Cathode 3 1.32 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2 Base Common Cathode 2 1.22 (0.05) 2.92 (0.11) 2.54 (0.10) TERM 2 0.10 (0.004) Anode Anode 123 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. Conform to JEDEC outline TO-220AB Dimensions in millimeters and (inches) 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) 0.55 (0.02) 0.46 (0.02) 3X Base Common Cathode 2 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 3 4.57 (0.18) 4.32 (0.17) 2 0.61 (0.02) MAX. 1 2 Common Cathode 3 8.89 (0.35) 17.78 (0.70) 5.08 (0.20) REF. 3.81 (0.15) 2.08 (0.08) 2X Anode Anode 2.54 (0.10) 2X Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) www.irf.com 5 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 Outline Table Base Common Cathode 2 1 Anode 2 Common Cathode 3 Anode Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) Marking Information EXAMPLE: THIS IS A 30L30CT LOT CODE 1789 ASSEMBLED ON WW 19, 2001 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR 7 = 2001 WEEK 19 LINE C 6 www.irf.com 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 30L30CT *************************************************************************************************** This model has been developed by Wizard SPICE MODEL GENERATOR (1999) (International Rectifier Corporation) contains Proprietary Information *************************************************************************************************** SPICE Model Diode is composed by a simple diode plus paralled VCG2T *************************************************************************************************** .SUBCKT 30l30ct ANO CAT D1 ANO 1 DMOD (0.08936) *Define diode model .MODEL DMOD D(IS=3.01789428908089E-04A,N=1.12506549677918,BV=35V, + IBV=0.40837541124234A,RS= 0.000285952,CJO=3.65460570356249E-08, + VJ=0.934944724736772,XTI=2, EG=0.674450307828855) *************************************************************************************************** *Implementation of VCG2T VX 1 2 DC 0V R1 2 CAT TRES 1E-6 .MODEL TRES RES(R=1,TC1=11.2856367229303) GP1 ANO CAT VALUE={-ABS(I(VX))*(EXP((((-2.138249E-03/11.28564)*((V(2,CAT)*1E6)/(I(VX)+1E-6)1))+1)*9.434315E-02*ABS(V(ANO,CAT)))-1)} *************************************************************************************************** .ENDS 30l30ct Thermal Model Subcircuit .SUBCKT 30L30CT 5 1 CTHERM1 CTHERM2 CTHERM3 CTHERM4 RTHERM1 RTHERM2 RTHERM1 RTHERM1 5 4 3 2 5 4 3 2 4 3 2 1 4 3 2 1 3.53E-1 6.35E0 5.15E+1 4.08E+3 3.15E-1 6.15E-1 3.7E-1 1.98E-1 .ENDS 30L30CT www.irf.com 7 30L30CT, 30L30CTS, 30L30CT-1 Bulletin PD-20555 rev. B 02/03 Ordering Information Table Device Code 30 1 L 2 30 3 C 4 T 5 -1 6 1 2 3 4 5 6 - 30 = Current Rating L = Schottky - L Series 30 = Voltage Rating C = Common Cathode T = TO-220 1 = TO-262 S = D2Pak Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02 /03 8 www.irf.com |
Price & Availability of 30L30CTS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |