 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SD1767 / 2SD1859 Transistors Medium power transistor (80V, 0.7A) 2SD1767 / 2SD1859 Features 1) High breakdown voltage, BVCEO=80V, and high current, IC=0.7A. 2) Complements the 2SB1189 / 2SB1238. External dimensions (Unit : mm) 2SD1767 4.0 1.0 2.5 0.5 1.5 0.4 (1) 3.0 Absolute maximum ratings (Ta=25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature 2SD1767 2SD1859 Tj Tstg Symbol VCBO VCEO VEBO IC ICP PC Limits 80 80 5 0.7 1 0.5 2 1 150 -55 to +150 2 3 0.5 (3) Unit V V V A(DC) A(Pulse) W C C 1 1.5 0.4 ROHM : MPT3 EIAJ : SC-62 0.4 (1) Base (2) Collector (3) Emitter 2SD1859 6.8 2.5 1 Pw=10ms, duty=1/2 2 When mounted on a 40x40x0.7 mm ceramic board. 3 Printed circuit board 1.7 mm thick, collector plating 1cm2 or larger. Type Package hFE Marking Code Basic ordering unit (pieces) 2SD1767 MPT3 PQR 2SD1859 ATV QR - TV2 2500 (1) (2) (3) 2.54 2.54 0.5 Denotes hFE DC T100 1000 1.05 14.5 Packaging specifications and hFE 0.65Max. 1.0 0.9 4.4 1.5 0.45 Taping specifications ROHM : ATV (1) Emitter (2) Collector (3) Base Electrical characteristics (Ta=25C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. 80 80 5 - - - 120 - - Typ. - - - - - 0.2 - 120 10 Max. - - - 0.5 0.5 0.4 390 - - Unit V V V A A V - MHz pF IC=50A IC=2mA IE=50A VCB=50V VEB=4V IC/IB=500mA/50mA VCE/IC=3V/0.1A VCE=10V, IE=-50mA, f=100MHz VCB=10V, IE=0A, f=1MHz Conditions DC current transfer ratio Transition frequency Output capacitance 4.5 1.6 (2) Rev.A 1/2 2SD1767 / 2SD1859 Transistors Electrical characteristics curves COLLECTOR CURRENT : IC (A) 7mA 6mA 5mA 4mA 3mA COLLECTOR CURRENT : IC (mA) 1.0 Ta=25C 10mA 9mA 8mA 50 20 10 5 2 1 0.5 0.2 0.1 0 0.2 0.4 Ta=25C VCE=6V 1000 Ta=25C 500 DC CURRENT GAIN : hFE 0.8 0.6 2mA 200 VCE=5V 3V 1V 0.4 1mA 100 0.2 0 0 2 4 6 8 50 IB=0A 10 0.6 0.8 1.0 1.2 1.4 1.6 1 2 5 10 20 50 100 200 500 5000 COLLECTOR TO EMITTER VOLTAGE : VCE (V) BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR CURRENT : IC (mA) Fig.1 Ground emitter output characteristics Fig.2 Ground emitter propagetion characteristics Fig.3 DC current gain vs. collector current Ta=25C 1000 TRANSITION FREQUENCY : fT (MHz) 0.2 500 Ta=25C VCE=5V COLLECTOR OUTPUT CAPACITANCE : Cob (pF) COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 100 50 Ta=25C f=1MHz IC=0A 0.1 IC/IB=20 200 100 50 0.05 10 20 0.02 10 5 0.5 1 2 5 10 20 20 10 -1 -2 -5 -10 -20 -50 -100 0.01 2 5 10 20 50 100 200 500 1000 COLLECTOR CURRENT : IC (mA) EMITTER CURRENT : IE (mA) COLLECTOR TO BASE VOLTAGE : VCB (V) Fig.4 Collector-emitter saturation voltage vs. collector current Fig.5 Resistance raito vs. emitter current Fig.6 Collector output capacitance vs. collector-base voltage 10 EMITTER INPUT CAPACITANCE : Cib (pF) COLLECTOR CURRENT : IC (A) 100 50 2 1 500m 200m 100m 50m COLLECTOR CURRENT : IC (A) Ta=25C f=1MHz IC=0A 5 IC Max (Pulse) PW 0m =1 2 1 IC Max Pulse IC Max 0.5 D C PW PW =1 00 m =1 s D 0m PW 0 =1 C s s s 0m 0.2 0.1 Tc=25C 0.05 Single nonrepetitive pulse 0.02 1 2 5 20 10 5 0.5 1 2 5 10 20 20m 10m Tc=25C 5m Single nonrepetitive 2m pulse 1m 0.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1000 10 20 50 100 EMITTER TO BASE VOLTAGE : VEB (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.7 Emitter input capacitance vs. emitter-base voltage Fig.8 Safe operating area (2SD1859) Fig.9 Safe operating area (2SD1767) Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of 2SD1859
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |