![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TM EV1541DJ-TFT-00A MP1541 TFT Applications Evaluation Board EVALUATION BOARD The Future of Analog IC Technology TM GENERAL DESCRIPTION The EV1541DJ-TFT-00A is the evaluation board for TFT applications using the MP1541. The MP1541 is a 5-pin thin SOT23 current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. The MP1541 operates from an input voltage as low as 2.5V and can generate 12V at up to 200mA from a 5V supply. The EV1541DJ-TFT-00A provides VOUT from the boost output and also derives VP (positive) and VN (negative) from the charge pumps off of the boost switching node. FEATURES * * * * * * * * * * * * 3V to 3.6V Operating Input Range Uses Tiny Capacitors and Inductors 1.3MHz Fixed Switching Frequency Internally Compensated Internal Soft Start 3 Outputs in a Single Package: Boost Converter for 5V, Charge Pump for 15V, and Negative Charge Pump for -10V UVLO, Thermal Shutdown Internal Current Limit Available in a TSOT23-5 Package Handheld Computers and PDAs Digital Still and Video Cameras Small LCD Displays APPLICATIONS ELECTRICAL SPECIFICATIONS Parameter Input Voltage Output Voltage 1 Output Current 1 Output Voltage 2 Output Current 2 Output Voltage 3 Output Current 3 Symbol VIN VOUT IOUT VN IN VP IP Value 3 - 3.6 5 200 -10 10 15 20 Units V V mA V mA V mA "MPS" and "The Future of Analog IC Technology", are Trademarks of Monolithic Power Systems, Inc. EV1541DJ-TFT-00A EVALUATION BOARD Dimensions (2.0"X x 2.0"Y x 0.4"Z) Board Number EV1541DJ-TFT-00A MPS IC Number MP1541DJ EV1541DJ-TFT-00A Rev. 1.0 www.MonolithicPower.com 6/8/2005 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. (c) 2005 MPS. All Rights Reserved. 1 TM EV1541DJ-TFT-00A - MP1541 TFT APPLICATIONS EVALUATION BOARD EVALUATION BOARD EVALUATION BOARD SCHEMATIC D4 R6 NS VGH D3 SW ZD1 NS C10 NS SW D6 ZD2 NS C17 NS VP 15V @ 20mA D7 R7 NS VGL VN --10V @ 10mA JP2 D2 D5 VOUT JP1 VIN SW OPTIONAL FOR 3X MODE D1 VOUT VIN 3.3V VIN VOUT 5V @ 200mA GND 5 IN U1 SW 1 R4 NS C2 NS GND MP1541 EN 4 EN FB 3 2 GND EV1541_TFT_S01 EV1541DJ-TFT-00A Rev. 1.0 www.MonolithicPower.com 6/8/2005 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. (c) 2005 MPS. All Rights Reserved. 2 TM EV1541DJ-TFT-00A - MP1541 TFT APPLICATIONS EVALUATION BOARD EVALUATION BOARD EV1541DJ-TFT-00A BILL OF MATERIALS Qty 1 3 1 Ref C1 C2, C10, C17 C3 C4, C5, C6, C7, C8, C11, C12, C13, C14, C15 C9, C16 D1 D2, D3, D4, D5, D6, D7 JP1, JP2 L1 R1 R2 R3, R5 R4, R6, R7 U1 ZD1, ZD2 Value Description 10F NS Ceramic Cap, 10V, X5R Not Stuffed 1210 Taiyo Yuden LMK325BJ475KD Package Manufacturer 1210 TDK Manufacturer P/N C3225X5R1A106K 4.7F Ceramic Cap, 10V, X5R 10 0.1F Ceramic Cap, 50V, X7R 0805 TDK C2012X7R1H1 04K 2 1 6 2 1 1 1 2 3 1 2 1F Ceramic Cap, 25V, X5R Schottky Diodes, 40V, 1A Diode Rectifier, Dual, 30V, 200mA 3-Pin Connector Header, 0.100 0805 TDK C2012X5R1E105K 1N5819HW-7 BAT54S PTC03SAAN CDRH4D28CLD-3R3 ERJ-6ENF3012V ERJ-6ENF1002V ERJ-6GEYJ104V SOD-123 Diodes Inc SOT-123 Fairchild Sullins Sumida 0805 0805 0805 Panasonic Panasonic Panasonic 3.3H 1.6A 30.1k Metal Film Res, 1% 10k Metal Film Res, 1% 100k Metal Film Res, 5% NS Not Stuffed DC-DC Converter NS Not Stuffed TSOT23-5 MPS MP1541DJ EV1541DJ-TFT-00A Rev. 1.0 www.MonolithicPower.com 6/8/2005 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. (c) 2005 MPS. All Rights Reserved. 3 TM EV1541DJ-TFT-00A - MP1541 TFT APPLICATIONS EVALUATION BOARD EVALUATION BOARD PRINTED CIRCUIT BOARD LAYOUT Figure 1--Top Silk Layer Figure 2--Top Layer Figure 3--Bottom Layer EV1541DJ-TFT-00A Rev. 1.0 www.MonolithicPower.com 6/8/2005 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. (c) 2005 MPS. All Rights Reserved. 4 TM EV1541DJ-TFT-00A - MP1541 TFT APPLICATIONS EVALUATION BOARD EVALUATION BOARD QUICK START GUIDE The output voltage of this board is set to 5V, -10V and 15V on VOUT, VN and VP, respectively. The board layout accommodates most commonly used inductors and output capacitors. 1. Preset the power supply to 3V VIN 3.6V. 2. Turn off the power supply. 3. Connect the power supply terminals to: a. Positive (+): VIN, EN b. Negative (-): GND 4. Connect the load to: a. Positive (+): VOUT, VP, GND (for the negative output) b. Negative (-): GND, VN (for the negative output) 5. Turn on the power supply after making the connections. 6. The MP1541 is disabled on the evaluation board if only VIN is applied. To enable the MP1541, EN needs to be pulled HIGH. 7. The output voltage VOUT can be changed by varying R1. Calculate the new value using the formula: V R1 = OUT - 1R2 V FB Where VFB = 1.25V and R2 = 10k For example, for VOUT = 7.5V 7 .5 V - 1 x 10k = 50k R1 = 1.25 V Therefore use a 49.9k standard 1% value resistor. NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications. Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications. EV1541DJ-TFT-00A Rev. 1.0 www.MonolithicPower.com 6/8/2005 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. (c) 2005 MPS. All Rights Reserved. 5 |
Price & Availability of MP1541DJ
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |