![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
UNISONIC TECHNOLOGIES CO., LTD SK1288 2-PHASE DC-FAN MOTOR DRIVER LINEAR INTEGRATED CIRCUIT DESCRIPTION SK1288 is a 2-Phase driver for DC-Fan motor . Build-in hall amplifier with hysteresis. Low switching noise and effective motor driver are further advantages . Support the function of motor lock protection , auto-restart , rotation detection signal output . SOP-8 FEATURES * Wide supply voltage range of 2.5V to 20V *Output current Io(max)=600mA *Operate with Hall element *Lock protection *Auto-restart when the motor lock is undone *FG(frequency generator) output *SOP-8 package *Pb-free plating product number: SK1288L ORDERING INFORMATION Order Number Normal Lead Free Plating SK1288-S08-R SK1288L-S08-R SK1288-S08-T SK1288L-S08-T Package SOP-8 SOP-8 Packing Tape Reel Tube SK1288L-S08-R (1)Packing Type (2)Package Type (3)Lead Plating (1) R: Tape Reel, T: Tube (2) S08: SOP-8 (3) L: Lead Free Plating Blank: Pb/Sn , www.unisonic.com.tw Copyright (c) 2005 Unisonic Technologies Co., Ltd 1 of 8 QW-R109-024,A SK1288 PIN CONFIGURATION LINEAR INTEGRATED CIRCUIT CT 1 8 FG VCC 2 7 HIN A2 3 6 HIP GND 4 5 A1 BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 8 QW-R109-024,A SK1288 ABSOLUTE MAXIMUM RATINGS (Ta = 25 ) PARAMETER LINEAR INTEGRATED CIRCUIT SYMBOL RATINGS UNIT Supply voltage VCC 2.5V ~ 20V V Supply current ICC 20 mA Circuit current Io 600 mA FG output current IFG 20 mA Power dissipation PD 700 mW Hall input common mode voltage range VHIC 1.0 ~ VCC-0.5 V Operating ambient temperature TOPR -20 ~ +85 Storage temperature TSTG -55 ~ +150 Note 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. The device is guaranteed to meet performance specification within 0 ~+70 operating temperature range and assured by design from -20 ~+85 . ELECTRICAL CHARACTERISTICS (Ta=25 PARAMETER Current drain Lockup detection capacitor charge current Capacitor discharge current Capacitor charge/discharge current ratio CT charge voltage CT discharge voltage Output low level voltage Hall input sensitivity FG output pin low voltage FG output pin leakage current SYMBOL ICC ICT1 ICT2 RCT VCT1 VCT2 VOL VHIN VFG IFG(LEAK) , VCC=3V) TYP MAX UNIT 13 mA 3 mA 1.2 1.5 uA 0.6 0.8 uA 2.5 1.3 V 0.3 V 0.3 0.7 V 15 0.11 1 mV V uA CONDITIONS MIN In drive mode (CT=L) In lockup protection mode (CT=H ) V 1PIN = 1.3V 0.9 V 1PIN = 1.3V 0.5 IO=200mA Zero peak value (including offset and hysteresis) IFG=5mA VFG=15V 3 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 8 QW-R109-024,A SK1288 TYPICAL APPLICATION CIRCUIT LINEAR INTEGRATED CIRCUIT VIN 10K Vcc FG output Hall element FG H+ HCT GND A1 A2 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 8 QW-R109-024,A SK1288 TEST CIRCUIT 1. Icc LINEAR INTEGRATED CIRCUIT 0V 2V FG H- H+ A1 CT Vcc A2 GND CT "H" = 2V CT "L" = 0V 5V 2. CT charge / discharge 0V 2V CT(I) discharge 0 FG H- H+ A1 0 charge 2 CT(V) CT Vcc A2 GND CT(I) discharge 0 CT = 0V ~2 V 5V charge 2 0 CT(V) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 8 QW-R109-024,A SK1288 TEST CIRCUIT(Cont.) 3. VOL LINEAR INTEGRATED CIRCUIT 0V 2V H+ H FG HH+ A1 L HL H A1 L H A2 H L H L FG CT Vcc A2 GND 200mA Output "L" V DC 5V 4. Hall input offset 2V 1.5V ~2.5V 10K 5V FG H- H+ A1 V CT Vcc A2 GND 5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 8 QW-R109-024,A SK1288 TEST CIRCUIT (Cont.) 5. VFGL & IFGL LINEAR INTEGRATED CIRCUIT 2V 0V 5mA FG DC FG = L VFGL FG HH+ A1 V CT Vcc A2 GND 2V FG I IFGL 5V 6. FG leakage 0V 15V I FG = H FG HH+ 2V A1 CT Vcc A2 GND 5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 8 QW-R109-024,A SK1288 LOCK DETECTION LINEAR INTEGRATED CIRCUIT H+ ON OFF A2 CT Motor locked ton Motor lock detected Motor lock cleared toff Reverts to normal operation FG output OFF UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 8 QW-R109-024,A |
Price & Availability of SK1288L-S08-R
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |