![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Features * * * * * * Single 3-V Supply Voltage High Power-added Efficient Power Amplifier (Pout Typically 23 dBm) Ramp-controlled Output Power Current-saving Standby Mode Few External Components HP-VFQFP-N16 Package Electrostatic sensitive device. Observe precautions for handling. BluetoothTM 2.4-GHz Power Amplifier T7023 Description The T7023 is a monolithic SiGe power amplifier. It is especially designed for operation in TDMA systems like Bluetooth and WDCT. Due to the ramp-control feature and a very low quiescent current, an external switch transistor for VS is not required. Figure 1. Block Diagram V1_PA V2_PA V2_PA GND GND PA_IN GND Ramp GND GND GND SiGe PA T7023 GND GND V3_PA_OUT V3_PA_OUT V3_PA_OUT Rev. 4532B-BLURF-01/03 1 Pin Configuration Figure 2. Pinning HP-VFQFP-N16 V3_PA_OUT V3_PA_OUT V3_PA_OUT GND GND GND Ramp GND 8765 9 10 11 12 13 14 15 16 V2_PA V2_PA GND V1_PA 4 3 2 1 GND GND PA_IN GND Pin Description Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Slug Symbol GND PA_IN GND GND GND V3_PA_OUT V3_PA_OUT V3_PA_OUT GND GND RAMP GND V2_PA V2_PA GND V1_PA GND Function Ground Power amplifier input Ground Ground Ground Inductor to power supply and matching network for power amplifier output Inductor to power supply and matching network for power amplifier output Inductor to power supply and matching network for power amplifier output Ground Ground Power ramping control input Ground Inductor to power supply for power amplifier Inductor to power supply for power amplifier Ground Supply voltage for power amplifier Ground 2 T7023 4532B-BLURF-01/03 T7023 Absolute Maximum Ratings All voltages are referred to ground (Pins GND and slug), no RF Parameters Supply voltage Pins V1_PA, V2_PA and V3_PA_OUT Junction temperature Storage temperature RF input power PA Symbol VS Tj Tstg PinPA Value 6 150 -40 to +125 10 dBm Unit V C C dBm Thermal Resistance Parameters Junction ambient HP-VFQFP-N16, Slug soldered on pcb Symbol RthJA Value 40 Unit K/W Operating Range All voltages are referred to ground (Pins GND and slug). Power supply points are V1_PA, V2_PA, V3_PA_OUT. The following table represents the sum of all supply currents depending on the TX mode. Parameters Supply voltage Supply current Standby current Ambient temperature Pins V1_PA, V2_PA and V3_PA_OUT Symbol VS IS IS_standby Tamb -25 Min. 2.7 Typ. 3.0 165 10 +25 +70 Max. 4.6 Unit V mA A C 3 4532B-BLURF-01/03 Electrical Characteristics Test conditions (unless otherwise specified): VS = 3.0 V, Tamb = 25C Parameters Power Amplifier Supply voltage Supply current Frequency range Gain-control range Power gain maximum Power gain minimum Ramping voltage maximum Ramping voltage minimum Ramping current maximum Power-added efficiency Saturated output power Input matching (2) Output matching Harmonics at Psat = 23 dBm Harmonics at Psat = 23 dBm Notes: (2) (1) Test Conditions Pins V1_PA, V2_PA and V3_PA_OUT TX Standby TX TX TX Pin PA_IN to V3_PA_OUT TX Pin PA_IN to V3_PA_OUT TX, power gain (maximum) Pin RAMP TX, power gain (minimum) Pin RAMP V = 1.75 V TX TX, input power = 0 dBm referred to Pins V3_PA_OUT TX, Pin PA_IN TX, Pin V3_PA_OUT TX, Pin V3_PA_OUT TX, Pin V3_PA_OUT Symbol Min. Typ. Max. Unit VS IS_TX IS_standby f DGp Gp Gp VRAMP max VRAMP min 2.7 3.0 165 4.6 V mA 10 2.4 60 28 -40 1.7 1.75 0.1 0.5 42 30 33 -17 1.83 2.5 A GHz dB dB dB V V mA % PAE Psat Load VSWR Load VSWR 2 fo 3 fo 35 22 42 23 <1.5:1 <1.5:1 -30 -30 24 dBm dBc dBc 1. Power amplifier shall be unconditionally stable, maximum duty cycle 100%, true CW operation, maximum load mismatch and duration: VSWR 10:1 (all phases) 10 s, ZG = 50 W. 2. With external matching network, load impedance 50 W 4 T7023 4532B-BLURF-01/03 T7023 Typical Operating Characteristics Figure 3. Output Power and PAE versus Supply Voltage 50 250 Pout (dBm), PAE (%) 40 PAE I_S_TX 220 20 f = 2.4 GHz Vramp = 1.8 V PinPA = 0 dBm Pout 160 10 130 0 2.7 3.1 3.5 3.9 4.3 100 4.7 Supply Voltage (V) Figure 4. Output Power and PAE versus Frequency 50 PAE 250 Pout (dBm), PAE (%) 40 200 20 Pout VS = 3 V Vramp = 1.8 V PinPA = 0 dBm 100 10 50 0 2400 2420 2440 2460 2480 0 2500 Frequency (MHz) Figure 5. Output Power and PAE versus Ramp Voltage 50 PAE 250 Pout (dBm), PAE (%) 30 Pout 200 10 150 -10 I_S_TX f = 2.4 GHz VS = 3 V PinPA = 0 dBm 100 -30 50 -50 1.2 1.4 1.6 1.8 2.0 0 V ramp (V) IS_TX (mA) IS_TX (mA) 30 I_S_TX 150 IS_TX (mA) 30 190 5 4532B-BLURF-01/03 Figure 6. Output Power and PAE versus Input Power 40 PAE Gain Pout (dBm), PAE (%), gain (dB) 250 30 200 20 150 I_S 10 VS = 3 V Vramp = 1.7 V PinPA = 0 dBm 100 0 Pout 50 -10 -40.0 -30.0 -20.0 -10.0 0.0 0 10.0 Input Power (dBm) Figure 7. Pout versus Vramp and Temperature 30 f = 2.4 GHz VS = 3 V Pin = 0 dBm 20 5 Pout (dBm) 10 0 80 25 -15 -10 -40C -20 1.0 1.2 1.4 1.6 1.8 Vramp (V) 6 T7023 4532B-BLURF-01/03 IS_TX (mA) T7023 Figure 8. Output Power versus IRamp Current 30 25 20 Pout (dBM) 15 10 5 0 -5 -10 -15 -20 0.1 1.0 10.0 100.0 1000.0 0C -40C 40C 80C Iramp (mA) Figure 9. IS_TX versus VRamp Current 200 180 IS_TX (mA) 160 -40C 140 120 100 0C 40C 80 60 40 80C 20 0 0.1 1.0 10.0 100.0 1000.0 Iramp (mA) 7 4532B-BLURF-01/03 Input/Output Circuits Figure 10. Input Circuit PA_IN/V1_PA V1_PA PA_IN GND Figure 11. Input Circuit RAMP/V1_PA V1_PA RAMP Figure 12. Input Circuit V2_PA V2_PA GND 8 T7023 4532B-BLURF-01/03 T7023 Figure 13. Input/Output Circuit V3_PA_OUT V3_PA_OUT GND Figure 14. Application Board Schematic PA IN V1_PA 1p5 V2_PA 3p3 5p6 16 15 14 13 12 1 11 2 T7023 10 3 9 4 5678 5p6 Ramp harm. termination 15n H 1p5 blocking capacitors depending on application V3_PA PA OUT 9 4532B-BLURF-01/03 Ordering Information Extended Type Number T7023-PES T7023-PEQ Package HP-VFQFP-N16 HP-VFQFP-N16 Remarks Tube Taped and reeled Package Information 10 T7023 4532B-BLURF-01/03 Atmel Headquarters Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL 1(408) 441-0311 FAX 1(408) 487-2600 Atmel Operations Memory 2325 Orchard Parkway San Jose, CA 95131 TEL 1(408) 441-0311 FAX 1(408) 436-4314 RF/Automotive Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany TEL (49) 71-31-67-0 FAX (49) 71-31-67-2340 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 1(719) 576-3300 FAX 1(719) 540-1759 Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland TEL (41) 26-426-5555 FAX (41) 26-426-5500 Microcontrollers 2325 Orchard Parkway San Jose, CA 95131 TEL 1(408) 441-0311 FAX 1(408) 436-4314 La Chantrerie BP 70602 44306 Nantes Cedex 3, France TEL (33) 2-40-18-18-18 FAX (33) 2-40-18-19-60 Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France TEL (33) 4-76-58-30-00 FAX (33) 4-76-58-34-80 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL (852) 2721-9778 FAX (852) 2722-1369 ASIC/ASSP/Smart Cards Zone Industrielle 13106 Rousset Cedex, France TEL (33) 4-42-53-60-00 FAX (33) 4-42-53-60-01 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 1(719) 576-3300 FAX 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland TEL (44) 1355-803-000 FAX (44) 1355-242-743 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL (81) 3-3523-3551 FAX (81) 3-3523-7581 literature@atmel.com Web Site http://www.atmel.com (c) Atmel Corporation 2003. Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company's standard warranty which is detailed in Atmel's Terms and Conditions located on the Company's web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel's products are not authorized for use as critical components in life support devices or systems. Atmel (R) is the registered trademark of Atmel. The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc, and are used by Atmel Corporation under license. Other terms and product names may be the trademarks of others. Printed on recycled paper. 4532B-BLURF-01/03 xM |
Price & Availability of T7023-PEQ
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |