![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ERRATA TO THE TC237 680- X 500-PIXEL CCD IMAGE SENSOR DATA SHEET SOCS044 - JUNE 1994 - REVISED NOVEMBER 1994 APRIL 1995 * Add following pinout to page 1: DUAL-IN-LINE PACKAGE (TOP VIEW) ODB 1 IAG2 2 SUB 3 ADB 4 OUT2 5 OUT1 6 12 IAG1 11 SAG 10 SAG 9 SUB 8 SRG 7 RST POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SOCS053 ADVANCE INFORMATION * Page 3 - Replace the terminal functions table with the following: Terminal Functions TERMINAL NAME ADB IAG1 IAG2 ODB OUT1 OUT2 RST SAG SRG SUB NO. 4 12 2 1 6 5 7 10, 11 8 3, 9 I/O I I I I O O I I I Supply voltage for amplifier-drain bias Image-area gate 1 Image-area gate 2 Supply voltage for overflow-drain antiblooming bias Output signal 1 Output signal 2 Reset gate Storage-area gate Serial-register gate Substrate DESCRIPTION ADVANCE INFORMATION * Page 13 - Replace the schematic with the following: VS 0.1 TMC57253 VCC Oscillator 1 7 GND VCC GND CLK 14 8 VCC 0.1 User-Defined Timer VCC 1 VAB 2 VCC 3 GND 4 EN 5 ABIN 6 ABMIN 7 IA1IN 8 IA2IN 9 SAIN 10 SRIN 11 SRMIN 12 GND VABM ABOUT VABL GND IA1OUT VI IA2OUT GND SAOUT VS SROUT VSM 0.1 33 + VADB + 15 0.1 ADB 10 k VODB 2N3904 10 k 2N3904 22 pF 15 + CLR VADB 15 + 1k OUT1 100 0.1 2N3904 33 + 24 23 22 21 20 19 18 17 16 15 14 13 15 V VSUB TC237 1 ODB 2 IAG2 3 SUB 4 ADB 5 OUT2 6 OUT1 IAG1 SAG SAG SUB SRG RST 12 11 10 9 8 7 12 1 CLKIN VCC 11 2 RST PCMP 10 3 IA1 CLAMP 9 4 IA2 S/H 8 5 SA CLEAR 7 6 SR GND VS 10 k VODB 15 + 0.1 1k 10 k 2N3904 22 pF DC VOLTAGES VS VCC All values are in and F unless otherwise noted. CLEAR is active-low TTL. CLR is nominally 18 VDC with a 10-V pulse for image clear. VSUB VADB VODB 12 V 5V 10 V 22 V 22 V 100 0.1 2N3904 OUT2 1k ADVANCE INFORMATION * Add following mechanical data The package for the TC237 consists of a ceramic base, a glass window, and a 12-lead frame. The glass window is sealed to the package by an epoxy adhesive. The package leads are configured in a dual-in-line organization and fit into mounting holes with 1,78 mm center-to-center spacings. TC237 (12 pin) Index Mark 5,99 5,59 1,91 1,65 4,50 4,10 Optical Center 12,40 12,00 11,70 11,50 ADVANCE INFORMATION Package Center 11,50 11,10 1,78 0,76 0,51 0,41 0,50 3,90 10,90 10,70 3,298 2,798 Focus Plane 2,08 1,48 0,33 0,17 3,998 3,398 11,68 11,18 ALL LINEAR DIMENSIONS ARE IN MILLIMETERS 04/95 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof. Copyright (c) 1998, Texas Instruments Incorporated |
Price & Availability of SOCS053
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |