|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
E2E1014-27-Y4 Semiconductor MSM65516/65P516 Semiconductor High performance 8-Bit Microcontroller ThisMSM65516/65P516 version: Jan. 1998 Previous version: Nov. 1996 GENERAL DESCRIPTION The MSM65516 is a high-performance 8-bit microcontroller that employs OKI original nX-8/50 CPU core. With a minimum instruction execution time of 400 ns (10MHz clock), the MSM65516 is capable of high-speed processing, and includes 32K bytes of program memory, 640 bytes of data memory, timers and serial ports. Also available are the MSM65P516, which replaces the onchip program memory with one-time PROM, and the MSM65X516, which uses external program memory. FEATURES * Operating range Operating frequency Operating voltage Operating temperature * Memory space Internal program memory Internal data memory * Minimum instruction execution time * Powerful instruction set : 0 to 10MHz (VDD=4.5 to 5.5V) 0 to 5MHz (VDD=2.7 to 5.5V) : 2.7 to 5.5V : -40 to +85C : 64K bytes : 32K bytes : 640 bytes : 400ns @ 10MHz : 83 basic instructions 8/16-bit operation instructions Bit manipulation instructions Compound function instructions : 8 8 AE 16 16 / 8 AE 16... 8 : 6 ports 8 bits : 1 port 8 bits : 8-bit auto-reload timer 2 16-bit auto-reload timer 1 Watchdog timer 1 : Time base counter 1 16-bit free-running counter 1 : 1 channel : 2 channels : Shift register 1 Serial port with baud rate generator (UART/Synchronous) 1 :3 : 15 : (MSM65516-SS, MSM65P516-SS) : (MSM65516-GS-BK, MSM65P516-GSBK) : (MSM65516-JS, MSM65P516-JS) indicates the code number. 1/23 * Abundant addressing modes * Multiplication/division operation functions * I/O port Input-output port Input port * Timers * Counters * Capture input * Compare output * Serial ports * External interrupts * Interrupt sources * Package 64-pin plastic shrink DIP (SDIP64-P-750-1.78) 64-pin plastic QFP (QFP64-P-1414-0.80-BK) 68-pin plastic QFJ (PLCC) (QFJ68-P-S950-1.27) BLOCK DIAGRAM Semiconductor RAM (256 bytes) OSC0 OSC1 RESET HSTOP* ROM (32K bytes) OSC CONT. CPU CORE INST. DEC. VDD GND ALU IR 8 EXT.MEM. CONT. 8 8 AD0-7* A8-15* RD WR* ALE EA GMAR PC BUS CONT. 8 RAM (384 bytes) TBC WDT T/C 8 16-bit TIMER T2CK* CAP* CMP0* CMP1* TXD* RXD* T1OUT* T0CK* GATE* SFTO* SFTI* SFTCK* INT0* INT1* INT2* AR BR PSW SP LMAR 16-bit FRC CAP1, CMP2 SIO 8-bit TIMER3** MUL/DIV I/O PORT 8-bit SHIFT-REG. MSM65516/65P516 INTERRUPT CONT. P0 P1 P2 P3 P4 P5 P6 * Secondary functions of ports ** One timer is used for the SIO baud rate generator. 2/23 Semiconductor MSM65516/65P516 PIN CONFIGURATION (TOP VIEW) P5.0 P5.1 P5.2 P5.3 P4.0 P4.1 P4.2 P4.3 P4.4 P4.5 P4.6 P4.7 P3.0/T2CK P3.1/CAP P3.2/CMP0 P3.3/CMP1 P3.4/INT2 P3.5/SFTO P3.6/SFTI P3.7/SFTCK RESET P2.0/RXD P2.1/TXD P2.2/INT0 P2.3/INT1/GATE P2.4/T0CK P2.5/HSTOP P2.6/WR P2.7/T1OUT OSC1 OSC0 GND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 VDD P6.7 P6.6 P6.5 P6.4 P6.3 P6.2 P6.1 P6.0 P5.7 P5.6 P5.5 P5.4 P0.0/AD0 P0.1/AD1 P0.2/AD2 P0.3/AD3 P0.4/AD4 P0.5/AD5 P0.6/AD6 P0.7/AD7 EA ALE RD P1.7/A15 P1.6/A14 P1.5/A13 P1.4/A12 P1.3/A11 P1.2/A10 P1.1/A9 P1.0/A8 64-Pin Plastic Shrink DIP 3/23 Semiconductor PIN CONFIGURATION (TOP VIEW) (Continued) P4.4 P4.5 P4.6 P4.7 P3.0/T2CK P3.1/CAP P3.2/CMP0 P3.3/CMP1 P3.4/INT2 P3.5/SFTO 10 P3.6/SFTI 11 P3.7/SFTCK 12 RESET 13 P2.0/RXD 14 P2.1/TXD 15 P2.2/INT0 16 , 64 P4.3 63 P4.2 62 P4.1 61 P4.0 60 P5.3 59 P5.2 1 2 3 4 5 6 7 8 9 P2.3/INT1/GATE 17 P2.4/T0CK 18 P2.5/HSTOP 19 P2.6/WR 20 P2.7/T1OUT 21 OSC1 22 MSM65516/65P516 55 P6.7 54 P6.6 53 P6.5 52 P6.4 54 P6.3 50 P6.2 49 P6.1 48 P6.0 47 P5.7 46 P5.6 45 P5.5 44 P5.4 43 P0.0/AD0 42 P0.1/AD1 41 P0.2/AD2 40 P0.3/AD3 39 P0.4/AD4 38 P0.5/AD5 37 P0.6/AD6 36 P0.7/AD7 35 EA 34 ALE 33 RD P1.7/A15 32 58 P5.1 OSC0 23 57 P5.0 GND 24 P1.0/A8 25 56 VDD P1.1/A9 26 P1.2/A10 27 P1.3/A11 28 P1.4/A12 29 P1.5/A13 30 64-Pin Plastic QFP P1.6/A14 31 4/23 Semiconductor MSM65516/65P516 PIN CONFIGURATION (TOP VIEW) (Continued) 56 P5.4 55 P0.0/AD0 54 P0.1/AD1 53 P0.2/AD2 52 NC 51 P0.3/AD3 50 P0.4/AD4 49 P0.5/AD5 48 P0.6/AD6 47 P0.7/AD7 60 P6.0 59 P5.7 58 P5.6 57 P5.5 46 EA 45 ALE P6.1 61 P6.2 62 P6.3 63 P6.4 64 P6.5 65 P6.6 66 P6.7 67 NC 68 VDD 1 P5.0 2 P5.1 3 P5.2 4 P5.3 5 P4.0 6 P4.1 7 P4.2 8 P4.3 9 44 RD 43 P1.7/A15 42 P1.6/A14 41 P1.5/A13 40 P1.4/A12 39 P1.3/A11 38 P1.2/A10 37 P1.1/A9 36 P1.0/A8 35 NC 34 GND 33 OSC0 32 OSC1 31 P2.7/T1OUT 30 P2.6/WR 29 P2.5/HSTOP 28 P2.4/T0CK 27 P2.3/INT1/GATE P4.4 10 P4.5 11 P4.6 12 P4.7 13 P3.0/T2CK 14 P3.1/CAP 15 P3.2/CMP0 16 P3.3/CMP1 17 NC 18 P3.4/INT2 19 P3.5/SFTO 20 P3.6/SFTI 21 P3.7/SFTCK 22 RESET 23 P2.0/RXD 24 NC: No-connection pin 68-Pin Plastic QFJ (PLCC) P2.1/TXD 25 P2.2/INT0 26 5/23 Semiconductor MSM65516/65P516 PIN DESCRIPTIONS Basic Functions Function Power Supply Oscillation Symbol VDD GND OSC0 OSC1 RESET EA Control RD ALE PORT 0 O O I/O Type -- -- I O I I +5V power supply 0V digital ground Crystal oscillator input/external clock input Crystal oscillator output System reset input (program starts from address 0040H); internal pull-up resistance Program memory select input pin. "L" level input for external program memory; "H" level input for internal program memory. Read strobe signal during external memory access Address latch signal during external memory access 8-bit Input-output port During external memory access, becomes address/data bus for address output, instruction fetch or data read/write along with ALE, RD and WR pins. 8-bit Input-output port Address bus during external memory access 8-bit Input-output port 4. Secondary functions shown in following table are added for ports 2 and 3. Description PORT 1 Port PORT 2 PORT 3 PORT 4 PORT 5 PORT 6 I/O I/O I 8-bit Input port 6/23 Semiconductor Secondary Functions Symbol RXD Type I/O Description MSM65516/65P516 P2.0 secondary function UART: Input pin for serial port receive data. Synchronous: Input/output pin for serial port transmit/receive data. P2.1 secondary function UART: Output pin for serial port transmit data. Synchronous: Output pin for serial port synchronizing clock. P2.2 secondary function External interrupt 0 input pin. P2.3 secondary functions External interrupt 1 input pin. Also used as input pin for gate signal for timer 0 count enable/disable. P2.4 secondary function Timer 0 external clock input pin. P2.5 secondary function Hard stop mode input pin; stops system clock oscillation with "L" level input. P2.6 secondary function Write strobe signal output pin during external data memory access. P2.7 secondary function Output pin for signal obtained by dividing timer overflow by 2. P3.0 secondary function Timer 2 external clock input pin. P3.1 secondary function Capture trigger input pin. P3.2 secondary function Compare output channel 0 output pin. P3.3 secondary function Compare output channel 1 output pin. P3.4 secondary function External interrupt 2 input pin. P3.5 secondary function Shift register data output pin. P3.6 secondary function Shift register data input pin. P3.7 secondary function Shift register synchronizing clock input/output pin. TXD O INT0 INT1/GATE I I T0CK HSTOP WR T1OUT T2CK CAP CMP0 CMP1 INT2 SFTO SFTI SFTCK I I O O I I O O I O I I/O 7/23 Semiconductor Port Circuit Configuration Type Port Circuit Configuration MSM65516/65P516 Electrical Characteristics (VDD=5V) Data Bus P0D PORT0 "H" Input Voltage: * VIH=2.4V "L" Input Voltage: * VIL=0.8V "H" Output Voltage: * VOH=3.75V * IOH=-400mA 1 P0.0/AD0 to P0.7/AD7 P0 DIR External Memory Control "L" Output Voltage: * VOL=0.4V * IOL=3.2mA Data Bus P1D PORT1 "H" Input Voltage: * VIH=2.4V "L" Input Voltage: * VIL=0.8V "H" Output Voltage: * VOH=3.75V * IOH=-200mA 2 P1.0/A8 to P1.7/A15 P1 DIR External Memory Control "L" Output Voltage: * VOL=0.4V * IOL=1.6mA "H" Input Voltage: * VIH=2.4V "L" Input Voltage: * VIL=0.8V Data Bus P2.6/WR "H" Output Voltage: * VOH=3.75V * IOH=-400mA "L" Output Voltage: * VOL=0.4V * IOL=3.2mA Excluding P2.6/WR "H" Output Voltage: * VOH=3.75V * IOH=-200mA "L" Output Voltage: * VOL=0.4V * IOL=1.6mA 3 P2.0/RXD, P2.1/TXD, P2.6/WR, P2.7/T1OUT, P3.2/CMP0, P3.3/CMP1, P3.5/SFTO, P3.7/SFTCK Px MOD Secondary Output Function PORTx PxD Px DIR Secondary Input Function (x=2 to 5) 8/23 Semiconductor Port Circuit Configuration (Continued) Type Port Circuit Configuration MSM65516/65P516 Electrical Characteristics (VDD=5V) 4 P2.2/INT0, P2.3/INT1/GATE, P2.4/T0CK, P2.5/HSTOP, P3.0/T2CK, P3.1/CAP, P3.4/INT2, P3.6/SFTI, P4.0 to P4.7, P5.0 to P5.7 Data Bus PxD PORTx "H" Input Voltage: * VIH=2.4V "L" Input Voltage: * VIL=0.8V "H" Output Voltage: * VOH=3.75V * IOH=-200mA "L" Output Voltage: * VOL=0.4V * IOL=1.6mA Px DIR Secondary Input Function (x=2~5) 5 Data Bus P6.0 to P6.7 PORT6 "H" Input Voltage: * VIH=2.4V "L" Input Voltage: * VIL=0.8V 9/23 Semiconductor MSM65516/65P516 MEMORY MAPS General Memory Space 0FFFFH 0FF00H 0F000H Data Memory Inhibit Space External Memory Local Memory Space 1FFH Page 1 Data Memory 8000H Program Memory 100H SFR 100H Vector Call Table Area 80H Internal Memory Data Memory Page 0 80H 40H 20H 0 Program Memory Interrupt Vector Table Area Vector Call Table Area 40H 30H 20H 10H 0 Local Register Set 3 Local Register Set 2 Local Register Set 1 Local Register Set 0 ABSOLUTE MAXIMUM RATINGS Parameter Supply Voltage Input Voltage Output Voltage Power Dissipation Storage Temperature Symbol VDD VI VO PD TSTG Ta=25C per package Ta=25C per output -- Ta=25C Condition Rating -0.3 to 7.0 -0.3 to VDD+0.3 -0.3 to VDD+0.3 400 50 -55 to +150 mW C V Unit RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltage Memory Hold Voltage Oscillation Operating Frequency *1 External Clock Operating Frequency Operating Temperature Symbol VDD VDDMH fOSC Condition Refer to Figure 1. fOSC=0 Hz Refer to Figure 1. Range 2.7 to 5.5 2.0 to 5.5 1 to 10 MHz Unit V fEXTCLK Refer to Figure 1. 0 to 10 MHz Top -- -40 to +85 C *1 This is due to the standard of a crystal oscillator or resonator. 10/23 Semiconductor MSM65516/65P516 Ta=-40 to +85C 10 fOSC, fEXTCLK (MHz) 8 6 5 4 2 1 2 3 2.7 4 VDD (V) 5 5.5 6 * Oscillates at 1 MHz or more. Figure 1. Operating Frequency vs. Power Supply Voltage 11/23 Semiconductor MSM65516/65P516 ELECTRICAL CHARACTERISTICS DC Characteristics 1 (VDD=4.5 to 5.5V) (GND=0V, Ta=-40 to +85C) Parameter "H" Input Voltage 1 * "H" Input Voltage 2 * "L" Input Voltage "H" Output Voltage 1 * "H" Output Voltage 2 * "L" Output Voltage 1 * "L" Output Voltage 2 * 3 4 1 2 Symbol VIH1 VIH2 VIL VOH1 VOH2 VOL1 VOL2 ILI1 ILI2 IIL CI IDDS IDD Condition -- -- -- IOH=-200mA IOH=-400mA IOL=1.6mA IOL=3.2mA VI=VDD/0V VI=VDD/0V VI=0V f=1MHz, Ta=25C 5V, Stop mode * 8 Min. 2.4 0.7VDD -0.3 0.75VDD 0.75VDD -- -- -- -- -40 -- -- -- Typ. -- -- -- -- -- -- -- -- -- -200 5 -- 20 Max. VDD+0.3 VDD+0.3 0.8 -- -- 0.4 0.4 1 10 -400 -- 50 40 Unit V 3 4 5 6 Input Lack Current 1 * Input Lack Current 2 * "L" Input Current * Input Capacity 7 mA pF mA mA Still Current Consumption Operating Current Consumption 10MHz, 5V, no load Refer to Fig.2 *1 *2 *3 *4 *5 *6 *7 *8 Excluding OSC0 and RESET OSC0 and RESET Excluding P0, ALE, RD, P2.6/WR P0, ALE, RD, P2.6/WR EA, P6 Excluding RESET, EA, P6 RESET The ports configured as inputs should be coupled to VDD or 0V. Other ports should not be loaded. 12/23 Semiconductor DC Characteristics 2 (2.7 VDD < 4.5V) MSM65516/65P516 (GND=0V, Ta=-40 to +85C) Parameter "H" Input Voltage 1 "H" Input Voltage 2 "L" Input Voltage "H" Output Voltage 1 *3 *1 *2 Symbol VIH1 VIH2 VIL VOH1 VOH2 VOL1 VOL2 ILI1 ILI2 IIL CI IDDS IDD Condition -- -- -- IOH=-10mA IOH=-20mA IOL=10mA IOL=20mA VI=VDD/0V VI=VDD/0V VDD=2.7 to 3.3V, VI=0V f=1MHz, Ta=25C 3V, Stop mode *8 Min. 0.5VDD+0.2 0.6VDD+0.4 -0.3 0.75VDD 0.75VDD -- -- -- -- -40 -- -- -- Typ. -- -- -- -- -- -- -- -- -- -120 5 -- 6 Max. VDD+0.3 VDD+0.3 0.15VDD+0.1 -- -- 0.1 0.1 1 10 -240 -- 25 15 Unit V "H" Output Voltage 2 *4 "L" Output Voltage 1 *3 "L" Output Voltage 2 *4 Input Lack Current 1 Input Lack Current 2 "L" Input Current Input Capacity Still Current Consumption Operating Current Consumption *7 *5 *6 mA pF mA mA 5MHz, 3V, no load Refer to Fig.2 *1 *2 *3 *4 *5 *6 *7 *8 Excluding OSC0 and RESET OSC0 and RESET Excluding P0, ALE, RD, P2.6/WR P0, ALE, RD, P2.6/WR EA, P6 Excluding RESET, EA, P6 RESET The ports configured as inputs should be coupled to VDD or 0V. Other ports should not be loaded. 13/23 Semiconductor MSM65516/65P516 10MHz 50 40 Max. IDD (mA) 30 Typ. 20 10 2 3 4 5 VDD (V) 6 6MHz 50 40 Max. IDD (mA) 30 20 10 2 3 4 5 VDD (V) 6 Typ. 2MHz 50 40 IDD (mA) 30 20 10 2 3 4 5 VDD (V) 6 Ta=-40 to +85C, no load Max. Typ. Figure 2. Operating Current Consumption vs. Power Supply Voltage 14/23 Semiconductor AC Characteristics * External memory control MSM65516/65P516 (VDD=2.7 to 5.5V, GND=0V, Ta=-40 to +85C) Parameter Clock Period "L" Clock Pulse Width "H" Clock Pulse Width Clock Period "L" Clock Pulse Width "H" Clock Pulse Width ALE Pulse Width ALE Pulse Delay Time 1 ALE Pulse Delay Time 2 RD Pulse Width RD Pulse Delay Time WR Pulse Width WR Pulse Delay Time "L" Address Setup Time "H" Address Setup Time "L" Address Hold Time Bus Float Time "H" Address Hold Time "H" Address Hold Time Read Data Access Time Read Data Access Time Read Data Hold Time Write Data Setup Time Write Data Hold Time Symbol tC tCLW tCHW tC tCLW tCHW tAW tALD1 tALD2 tRW tRD tWW tWD tLAS tHAS tLAH tLAZ tHAHR tHAHW tRDAA tRDAR tRDH tWDS tWDH CL=100pF VDD=2.7 to 5.5V VDD=4.5 to 5.5V Conditions Min. 100 45 45 200 90 90 tC+tCHW-20 tCLW-20 tCLW-20 tC+tCHW-20 tCLW-40 tC+tCHW-40 tCLW-20 tC-40 tC-40 tCLW-20 -- tC-20 tC-20 -- -- 0 tC+tCLH-40 tCLW-20 Max. -- -- -- -- -- -- -- -- -- -- tCLW+20 -- tCLW+40 -- -- -- 20 -- -- tC+tCLW-15 tCHW+10 -- -- -- ns Unit 15/23 Semiconductor MSM65516/65P516 tCHW OSC0 tCLW ALE tC tAW tRD RD tRDAR tLAS P0 ADDRESS L tRDAA tHAS P1 tWD WR tLAH tLAZ tRW tALD1 tRDH INST or DATA IN tHAHR ADDRESS H tWW tALD2 tWDS P0 ADDRESS L DATA OUT tWDH tHAHW P1 ADDRESS H 16/23 Semiconductor * CPU control MSM65516/65P516 (VDD=2.7 to 5.5V, GND=0V, Ta=-40 to +85C) Parameter RESET Pulse Width RESET Pulse Width *1 *2 Symbol tRESW1 tRESW2 Condition -- -- Min. 20 *3 Max. -- -- Unit ns -- *1 Excluding power ON, stop mode and hard stop mode. *2 In power ON, stop mode and hard stop mode. *3 Oscillation stabilization time depends on resonator. RESET pulse width tRESW1, 2 RESET * Peripheral control 1 (VDD=2.7 to 5.5V, GND=0V, Ta=-40 to +85C) Parameter OSC EXI Clock Period External Interrupt Pulse Width External Clock Pulse Width GATE Pulse Width T2 External Clock Pulse Width CAP Pulse Width Symbol tC tEXIW Condition VDD=4.5 to 5.5V VDD=2.7 to 5.5V Min. 100 200 4 tC Max. -- -- -- Unit T0 tT0CW -- 4 tC 1 tTOCLK *1 4 tC -- ns tT0GW tT2CW -- -- CAP tCAPW 12 tC -- *1 tT0CLK : Timer 0 count clock period selected by T0CON. 17/23 Semiconductor MSM65516/65P516 tC OSC0 tCLW 1) EXI pulse width tEXIW INT0-2 2) T0 T0CK tT0CW tT0GW GATE 3) T2 tT2CW T2CK 4) CAP tCAPW CAP 18/23 Semiconductor * Peripheral control 2 MSM65516/65P516 (VDD=2.7 to 5.5V, GND=0V, Ta=-40 to +85C) Parameter OSC Clock Period SFTCK Period SFTCK "L" Pulse Width SFT SFTCK "H" Pulse Width SFTCK Setup Time SFTO Hold Time SFTI Setup Time SFTI Hold Time Synchronous Clock Period Synchronous Clock "L" Pulse Width Symbol tC tSFC tSFCLW tSFCHW tSFOS tSFOH tSFIS tSFIH tSIC tSICLW tSICHW tSIOS tSIOH tSIIS tSIIH CL=100pF Condition VDD=4.5 to 5.5V VDD=2.7 to 5.5V Min. 100 200 8 tC 4 tC-20 4 tC-20 tSFCLW-100 tSFCHW-100 100 100 8 tC 4 tC-20 4 tC-20 6 tC-100 2 tC-100 tC+tCLW+100 0 Max. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ns Unit SIO (Clock Synchronous Clock "H" Synchro- Pulse Width nous Output Data Setup Time Mode) Output Data Hold Time Input Data Setup Time Input Data Hold Time 19/23 Semiconductor Peripheral Control 2 1) SFT tSFC tSFCLW SFTCK tSFCHW MSM65516/65P516 tSFOS SFTO tSFIS SFTI tSFOH tSFIH 2) SIO (Clock synchronous mode) tSIC tSICLW TXD tSICHW tSIOS RXD (transmission) tSIIS RXD (reception) tSIOH tSIIH 20/23 Semiconductor MSM65516/65P516 PACKAGE DIMENSIONS (Unit : mm) SDIP64-P-750-1.78 Package material Lead frame material Pin treatment Solder plate thickness Package weight (g) Epoxy resin Cu alloy Solder plating 5 mm or more 8.70 TYP. Notes for Mounting the Surface Mount Type Package The SOP, QFP, TSOP, SOJ, QFJ (PLCC), SHP and BGA are surface mount type packages, which are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki's responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 21/23 Semiconductor MSM65516/65P516 (Unit : mm) QFP64-P-1414-0.80-BK Mirror finish Package material Lead frame material Pin treatment Solder plate thickness Package weight (g) Epoxy resin 42 alloy Solder plating 5 mm or more 0.87 TYP. Notes for Mounting the Surface Mount Type Package The SOP, QFP, TSOP, SOJ, QFJ (PLCC), SHP and BGA are surface mount type packages, which are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki's responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 22/23 Semiconductor MSM65516/65P516 (Unit : mm) QFJ68-P-S950-1.27 Mirror finish Package material Lead frame material Pin treatment Solder plate thickness Package weight (g) Epoxy resin Cu alloy Solder plating 5 mm or more 4.50 TYP. Notes for Mounting the Surface Mount Type Package The SOP, QFP, TSOP, SOJ, QFJ (PLCC), SHP and BGA are surface mount type packages, which are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki's responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 23/23 |
Price & Availability of MSM65P516 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |