View ON2788_997440.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SA5.0A Series
Zener Transient Voltage Suppressors
Unidirectional and Bidirectional
The SA5.0A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SA5.0A series is supplied in ON Semiconductor's exclusive, cost-effective, highly reliable Surmetic axial leaded package and is ideally-suited for use in communication systems, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications.
Specification Features: http://onsemi.com
* * * * * *
Stand-off Zener Voltage Range -- 5 to 170 V Peak Power -- 500 Watts @ 1 ms Maximum Clamp Voltage @ Peak Pulse Current Low Leakage < 1 A Above 8.5 V Maximum Temperature Coefficient Specified Response Time is Typically < 1 ns
MINI-MOSORB ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS 5-170 VOLT 500 WATT PEAK POWER 3 WATT STEADY STATE
Mechanical Characteristics: CASE: Void-free, transfer-molded, thermosetting plastic FINISH: All external surfaces are corrosion resistant and leads are
PLASTIC CASE 59
readily solderable
POLARITY: Cathode indicated by polarity band. When operated in ORDERING INFORMATION
Device SAXXXA SAXXXARL Package CASE 59 CASE 59 Shipping 1000 Units/Box Tape and Reel 5000 Units/Reel 1000 Units/Box
zener mode, will be positive with respect to anode MOUNTING POSITION: Any WAFER FAB LOCATION: Phoenix, Arizona ASSEMBLY/TEST LOCATION: Guadalajara, Mexico
MAXIMUM RATINGS
Rating Peak Power Dissipation (1) @ TL 25C Steady State Power Dissipation @ TL 75C, Lead Length = 3/8 Derated above TL = 75C Forward Surge Current (2) @ TA = 25C Operating and Storage Temperature Range Symbol PPK PD Value 500 3 30 IFSM TJ, Tstg 70 - 55 to +175 Unit Watts Watts mW/C Amps C
SAXXXCA Bidirectional SAXXXCARL Bidirectional
CASE 59
CASE 59
Tape and Reel 5000 Units/Reel
Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value.
Lead temperature not less than 1/16 from the case for 10 seconds: 230C NOTES: 1. Nonrepetitive current pulse per Figure 4 and derated above TA = 25C per Figure 2. NOTES: 2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.
(c) Semiconductor Components Industries, LLC, 2000
1
February, 2000 - Rev. 3
Publication Order Number: SA5.0A/D
SA5.0A Series
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) VF = 3.5 V Max, IF* = 35 A (except bidirectional devices).
Breakdown Voltage
{{VBR{{
(Volts) Device SA5.0A SA6.0A SA6.5A SA7.0A SA7.5A SA8.0A SA8.5A SA9.0A SA10A SA11A SA12A SA13A SA14A SA15A SA16A SA17A SA18A SA20A SA24A SA26A SA28A SA30A SA33A SA36A SA40A SA43A SA45A SA48A SA51A SA58A SA60A SA64A SA70A SA78A SA90A SA100A SA120A SA130A SA150A SA160A SA170A Min 6.4 6.67 7.22 7.78 8.33 8.89 9.44 10 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20 22.2 26.7 28.9 31.1 33.3 36.7 40 44.4 47.8 50 53.3 56.7 64.4 66.7 71.1 77.8 86.7 100 111 133 144 167 178 189 Max 7 7.37 7.98 8.6 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 71.2 73.7 78.6 86 95.8 111 123 147 159 185 197 209 @ IT (mA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Working Peak Reverse Voltage VRWM** (Volts) 5 6 6.5 7 7.5 8 8.5 9 10 11 12 13 14 15 16 17 18 20 24 26 28 30 33 36 40 43 45 48 51 58 60 64 70 78 90 100 120 130 150 160 170
Maximum Reverse Leakage @ VRWM IR (A) 600 600 400 150 50 25 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Maximum Reverse R Surge Current IRSM{ (Amps) 54.3 48.5 44.7 41.7 38.8 36.7 34.7 32.5 29.4 27.4 25.1 23.2 21.5 20.6 19.2 18.1 17.2 15.4 12.8 11.9 11 10.3 9.4 8.6 7.8 7.2 6.9 6.5 6.1 5.3 5.2 4.9 4.4 4 3.4 3.1 2.5 2.4 2.1 1.9 1.8
Maximum Reverse Voltage @ IRSM (Clamping Voltage) VRSM (Volts) 9.2 10.3 11.2 12 12.9 13.6 14.4 15.4 17 18.2 19.9 21.5 23.2 24.4 26 27.6 29.2 32.4 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 93.6 96.8 103 113 126 146 162 193 209 243 259 275
Maximum Voltage Temperature Variation of VBR mV/C 5 5 5 6 7 7 8 9 10 11 12 13 14 16 17 19 20 23 28 30 31 36 39 41 46 50 52 56 61 70 71 76 85 95 110 123 146 158 184 196 208
Devices listed in bold, italic are ON Semiconductor Preferred devices.
** 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. (continued) ** MOSORB transient suppressors are normally selected according to the maximum reverse stand-off voltage (VRWM), which should be equal to or greater than the dc or continuous peak ***operating voltage level. {{ Surge current waveform per Figure 4 and derate per Figure 2. {{ VBR measured at pulse test current IT at an ambient temperature of 25C.
FOR BIDIRECTIONAL APPLICATIONS USE CA SUFFIX for SA6.0CA through SA170CA Electrical characteristics apply in both directions.
Preferred Bidirectional Devices -- SA6.5CA SA13CA SA12CA SA15CA
SA18CA SA24CA
http://onsemi.com
2
SA5.0A Series
NONREPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 4 10 PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT @ TA= 25C 100
PP, PEAK POWER (kW)
100 80 60 40 20 0
1
0.1 0.1 s
1 s
10 s
100 s
1 ms
10 ms
0
25
50
tp, PULSE WIDTH
75 100 125 150 175 TA, AMBIENT TEMPERATURE (C)
200
Figure 1. Pulse Rating Curve
Figure 2. Pulse Derating Curve
tr 10,000 C, CAPACITANCE (pF) VALUE (%) MEASURED @ ZERO BIAS 100 PEAK VALUE -- IRSM
PULSE WIDTH (tp) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAYS TO 50% OF IRSM. tr 10 s IRSM 2
1000
HALF VALUE - 50 tP 0
100
MEASURED @ STAND-OFF VOLTAGE (VR) 0.1 1 10 100 1000 0
10
1
2 t, TIME (ms)
3
4
VBR, BREAKDOWN VOLTAGE (VOLTS)
Figure 3. Capacitance versus Breakdown Voltage
Figure 4. Pulse Waveform
PD , STEADY STATE POWER DISSIPATION (WATTS)
5 4 3/8
3/8
3
2
1
0 0 25 50 75 100 125 150 175 200 TL, LEAD TEMPERATURE (C)
Figure 5. Steady State Power Derating
http://onsemi.com
3
SA5.0A Series
OUTLINE DIMENSIONS
Transient Voltage Suppressors -- Axial Leaded
500 Watt Peak Power
B
NOTES: 1. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY. 2. POLARITY DENOTED BY CATHODE BAND. 3. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. MILLIMETERS MIN MAX 5.97 6.60 2.79 3.05 0.76 0.86 27.94 -- INCHES MIN MAX 0.235 0.260 0.110 0.120 0.030 0.034 1.100 --
K
D
A
DIM A B D K
K
CASE 59-04 PLASTIC
(Refer to Section 10 of the TVS/Zener Data Book (DL150/D) for Surface Mount, Thermal Data and Footprint Information.)
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
North America Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 2:30pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 2:30pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 1:30pm to 5:00pm UK Time) Email: ONlit@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong 800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5487-8345 Email: r14153@onsemi.com Fax Response Line: 303-675-2167 800-344-3810 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative.
http://onsemi.com
4
SA5.0A/D

▲Up To Search▲

Price & Availability of ON2788

	To Download ON2788 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .