View ON0501_995169.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
Order Number: MC100EPT24/D Rev. 0.1, 05/1999
Semiconductor Components
MC100EPT24
SO-8, D SUFFIX 8-LEAD PLASTIC SOIC PACKAGE CASE 751
ORDERING INFORMATION MC100EPT24D SOIC
Product Preview
LVTTL/LVCMOS to Differential LVECL Translator
* * * * * * * * * * 350ps Typical Propagation Delay Maximum Frequency > 1.0GHz Differential ECL Outputs Small Outline SOIC Package PNP LVTTL Inputs for Minimal Loading Flow Through Pinouts Q Output will default HIGH with inputs open ESD Protection:TBD KV HBM, TBD V MM Moisture Sensitivity Level 1, Indefinite Time Out of Drypack Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 * Transistor Count = 181 devices
PIN Q, Q D VCC GND VEE
PIN DESCRIPTION
FUNCTION Diff LVECL Outputs LVTTL Input Positive Supply Ground Negative Supply
The MC100EPT24 is a LVTTL/LVCMOS to differential LVECL translator. Because LVECL levels and LVTTL/ LVCMOS levels are used, a -3.3V, +3.3V and ground are required. The small outline 8-lead SOIC package and the single gate of the EPT24 makes it ideal for those applications where space, performance, and low power are at a premium. The EPT24 is available in the 100E standard and is compatible with ECL 100K logic levels.
This document contains information on a product under development. Motorola reserves the right to change or discontinue this product without notice.
(c) Motorola, Inc. 1999
1
ECLinPS PlusTM
MC100EPT24
VEE 1
LVTTL
8
VCC
D
2
LVECL
7
Q
NC
3
6
Q
NC
4
5
GND
Figure 1. 8-Lead Pinout (Top View) and Logic Diagram MAXIMUM RATINGS*
Symbol VEE VCC VI VI Iout TA Tstg JA JC Tsol Parameter Power Supply (VCC = 0V) Power Supply (VEE = 0V) Input Voltage (VCC = 0V, VI not more negative than VEE) Input Voltage (VEE = 0V, VI not more positive than VCC) Output Current Operating Temperature Range Storage Temperature Thermal Resistance (Junction-to-Ambient) Thermal Resistance (Junction-to-Case) Solder Temperature (<2 to 3 Seconds: 245C desired) Still Air 500lfpm Continuous Surge Value -6.0 to 0 6.0 to 0 -6.0 to 0 6.0 to 0 50 100 -40 to +85 -65 to +150 190 130 41 to 44 5% 265 Unit VDC VDC VDC VDC mA C C C/W C/W C
* Maximum Ratings are those values beyond which damage to the device may occur.
2
Home Page - http://scgtomorrow.motorola.com
MC100EPT24 ECLinPS PlusTM
LVTTL INPUT DC CHARACTERISTICS (VCC = 3.3V 0.3V; GND = 0V; TA = -40C to +85C)
Symbol IIH IIHH IIL VIK VIH VIL Input HIGH Current (Vin = 2.7V) Input HIGH Current MAX (Vin = 6.0V) Input LOW Current (Vin = 0.5V) Input Clamp Voltage (Iin = -18mA) Input HIGH Voltage Input LOW Voltage 2.0 0.8 Characteristic Min Typ Max 20 100 -0.6 -1.2 Unit A A mA V V V
LVECL OUTPUT DC CHARACTERISTICS (VCC = 3.3V 0.3V; VEE = -3.3V 0.3V; GND = 0V)
-40C Symbol VOH VOL ICCH ICCL Characteristic Output HIGH Voltage (Note 1.) Output LOW Voltage (Note 1.) Power Supply Current HIGH (Note 2.) Power Supply Current LOW (Note 3.) Min -1135 -1935 TBD TBD Typ Max -885 -1685 TBD TBD Min -1070 -1870 TBD TBD 25C Typ Max -820 -1620 TBD TBD Min -1010 -1810 TBD TBD 85C Typ Max -760 -1560 TBD TBD Unit mV mV mA mA
1. Output levels will vary 1:1 with GND; Outputs loaded through 50W to GND - 2.0V. 2. Outputs in HIGH state. 3. Outputs in LOW state.
AC CHARACTERISTICS (VCC = 3.3V 0.3V; VEE = -3.3V 0.3V; GND = 0V)
-40C Symbol fmax tPLH, tPHL tJITTER Characteristic Maximum Toggle Frequency (Note 4.) Propagation Delay to Output Differential Cycle-to-Cycle Jitter Min Typ TBD TBD TBD TBD Max Min 25C Typ >1.0 350 380 TBD Max Min 85C Typ TBD TBD TBD TBD TBD TBD Max Unit GHz ps ps ps
tr Output Rise/Fall Times TBD TBD tf (20% - 80%) Q, Q TBD 120 4. Fmax guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only.
Home Page - http://scgtomorrow.motorola.com
3
ECLinPS PlusTM
MC100EPT24 OUTLINE DIMENSIONS
SO-8, D SUFFIX PLASTIC SOIC PACKAGE CASE 751-06 ISSUE T
A
8
D
5
C
E
1 4
H
0.25
M
B
M
h B C e A
SEATING PLANE
X 45 _
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_
q
L 0.10 A1 B 0.25
M
CB
S
A
S
q
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA / PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. - http://sps.motorola.com/mfax/ 852-26629298 HOME PAGE: http://motorola.com/sps/ JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan. 81-3-5487-8488
4
Home Page - http://scgtomorrow.motorola.com
MC100EPT24/D

▲Up To Search▲

Price & Availability of ON0501

	To Download ON0501 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .