View NSC05481_994451.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MICROCIRCUIT DATA SHEET MNLM169-X REV 0BL
PRECISION VOLTAGE REFERANCE
Original Creation Date: 09/18/95 Last Update Date: 11/12/98 Last Major Revision Date: 09/18/95
Industry Part Number
LM169
NS Part Numbers
LM169H/883*
Prime Die
LM169
Controlling Document
5962-9456101MGA*
Processing
MIL-STD-883, Method 5004
Subgrp Description
1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at
Temp ( oC)
+25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55
Quality Conformance Inspection
MIL-STD-883, Method 5005
1
MNLM169-X REV 0BL
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS: ELECTRICAL CHARACTERISTICS
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: 13V <= Vin = 17V, 0 <= Iload <= 1.0mA, Cl = <= 200PF SYMBOL PARAMETER Vout CONDITIONS NOTES PINNAME MIN 9.995 8.500 Vout Error -500 -5 Vout Tempco Line Regulation Tmin < Tj < Tmax 13V <= Vin <= 30V 1 2 2 13V<=Vin<=30V 7 7 Load Regulation Sourcing (ppm) 0 to 10mA 3, 4, 6 3, 4, 6 Load Regulation Sourcing (Limits) Load Regulation Sinking (ppm) 0 to 10mA 7 7 0 to -10mA 5, 6 5, 6 Load Regulation Sinking (Limits) Thermal Regulation Sourcing (ppm) Thermal Regulation Sourcing (Limits) Supply Current 0 to -10mA 7 7 t = 10 msec After Load is Applied 8 1 1 -20 -680 -1360 -8.0 -20.0 -800 -2000 5 4.0 8.0 680 1360 8.0 20.0 800 2000 150 350 15 35 20 MAX UNIT SUBGROUPS 1 2, 3 1 1
10.005 V 11.500 V 500 5 ppm mV
ppm/ 2, 3 C ppm/V 1 ppm/V 2, 3 uV uV 1 2, 3
ppm/m 1 A ppm/m 2, 3 A uV uV 1 2, 3
ppm/m 1 A ppm/m 2, 3 A mV mV 1 2, 3
ppm/1 mW, 1 00 uV 1
t = 10 msec After Load is Applied
7
-660
660
1.1 0.3
1.8 2.0 120 350 50 65 30
mA mA uA uA mA mA
1 2, 3 1 2, 3 1 2, 3
Delta Supply Current Short Circuit Current Noise Voltage
13V <= Vin <= 30V
-120 -350 15 11
10Hz to 1kHZ
uVrms 1
2
MNLM169-X REV 0BL
MICROCIRCUIT DATA SHEET
Note 1:
Note 2: Note 3:
Note 4:
Note 5: Note 6: Note 7: Note 8:
Temperature Coefficient of Vout is defined as the worst-case delta Vout measured at Specified Temperature divided by the total span of the Specified Temperature Range. There is no guarantee that the Specified Temperature are exactly at the minimum or maximum deviation. ppm of Vout nominal per volt of input voltage change. The LM169 has a class B output, and will exhibit transient at the crossover point. The point occures when the device is required to sink approximately 1.0mA. In some applications it may be advantageous to pre-load the output to either Vin or to ground, to avoid this crossover point. Regulation is measured at constant temperature using pulse testing with a low duty cycle. Changes in output voltage due to heating effects are covered under the specifications for Thermal Regulation and Tempco. Load Regulation is measured at a point on the output pin 1/8 inch below the bottom of the package. In Sinking mode, connect 0.1uF tantalum capacitor from output to ground. ppm of Vout nominal per mA of output current change. Actual test program limits. Same limits as preceeding parameter. (For ease of spec review). Thermal regulation is defined as the change in the output voltage at a time T after a step change of power dissipation of 100mW.
3
MNLM169-X REV 0BL
MICROCIRCUIT DATA SHEET
Graphics and Diagrams
GRAPHICS# H08CRE (blank) DESCRIPTION
See attached graphics following this page.
4
MNLM169-X REV 0BL
MICROCIRCUIT DATA SHEET
Revision History
Rev
0BL
ECN #
Rel Date
Originator
Barbara Lopez
Changes
Changed: MNLM169-X Rev. 0AL to MNLM169-X Rev. 0BL.
M0001688 11/12/98
5

▲Up To Search▲

Price & Availability of NSC05481

	To Download NSC05481 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .