View NSC05213_994183.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MICROCIRCUIT DATA SHEET MNCLC409A-X REV 0A0
Original Creation Date: 08/05/98 Last Update Date: 02/24/99 Last Major Revision Date: 11/12/98
VERY WIDEBAND, LOW DISTORTION MONOLITHIC OP AMP
General Description
The CLC409 is a very wideband, DC coupled monolithic operational amplifier designed specifically for wide dynamic range systems requiring exceptional signal fidelity. Benefiting from Comlinear's current feedback architecture, the CLC409 offers a gain range of +1 to +10 while providing stable, oscillation free operation without external compensation, even at unity gain. With its 350MHz small signal bandwidth (Vout = 2Vpp), 10-bit distortion levels through 20MHz (Rl = 100Ohms), 8-bit distortion levels through 60Mhz, 2.2nV/SqRtHz input referred noise and 13.5mA supply current, the CLC409 is the ideal driver or buffer for high speed flash A/D and D/A converters. Wide dynamic range systems such as radar and communication receivers requiring a wideband amplifier offering exceptional signal purity will find the CLC409's low input referred noise and low harmonic and intermodulation distortion make it an attractive high speed solution.
Industry Part Number
CLC409A
NS Part Numbers
CLC409AE-QML** CLC409AJ-QML*
Prime Die
UB1927B
Controlling Document
5962-9203401MPA*, M2A**
Processing
MIL-STD-883, Method 5004
Subgrp Description
1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at
Temp ( oC)
+25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55
Quality Conformance Inspection
MIL-STD-883, Method 5005
1
MNCLC409A-X REV 0A0
MICROCIRCUIT DATA SHEET
Features
350MHz small signal bandwidth -65/-72dBc 2nd/3rd harmonics (20MHz) Low Noise 8ns settling to 0.1% 1200V/us slew rate 13.5mA supply current (+5V) 70mA output current
Applications
Flash A/D driver D/A transimpedance buffer Wide dynamic range IF amp Radar/communication receivers DDS post-amps Wideband inverting summer Line driver
2
MNCLC409A-X REV 0A0
MICROCIRCUIT DATA SHEET
(Absolute Maximum Ratings)
(Note 1) Supply Voltage (Vcc) +7V dc Common Mode Input Voltage (Vcm) +Vcc Differential Input Voltage +10V dc Output Current (Io) +70mA Power Dissipation (Pd) (Note 2) 1.2W Junction Temperature (Tj) +175 C Lead Temperature (soldering, 10 seconds) +300 C Storage Temperature Range -65 C to +125 C Thermal Resistance ThetaJA (Junction to Ambient) CERAMIC DIP (Still Air) (500 LFPM) LCC (Still Air) (500 LFPM) ThetaJC (Junction to Case) CERAMIC DIP LCC Package Weight (Typical) CERAMIC DIP LCC ESD Tolerance (Note 3) ESD Rating Note 1:
132 77 97 67
C/W C/W C/W C/W
26 C/W 27 C/W
1070 mg 465 mg
500 V
Note 2:
Note 3:
Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance, and TA (ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower. Human body model, 1.5K Ohms in series with 100pF.
3
MNCLC409A-X REV 0A0
MICROCIRCUIT DATA SHEET
Recommended Operating Conditions
Supply Voltage (Vcc) +5V dc Gain Range +1 to +10 Ambient Operating Temperature Range (Ta) -55 C to +125 C
4
MNCLC409A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
AC/DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Rl = 100 Ohms, Vcc = +5V dc, Av = +2, feedback resistor (Rf) = 250 Ohms, gain resistor (Rg) = 250 AC: Ohms -55 C < Ta < +125 C (Note 3) SYMBOL Ibn PARAMETER Input Bias Current, Noninverting Input Bias Current, Average Temperature Coefficient, Noninverting Input Bias Current, Inverting 1 1 CONDITIONS NOTES PINNAME MIN -22 -44 -125 -275 MAX +22 +44 +125 +275 UNIT uA uA SUBGROUPS 1, 2 3
DIbn
nA/C 2 nA/C 3
Ibi
-20 -30 -36
+20 +30 +36 +100 +200
uA uA uA
1 2 3
DIbi
Input Bias Current, Average Temperature Coefficient, Inverting Input Offset Voltage
1 1
-100 -200
nA/C 2 nA/C 3
Vio
-4.5 -9.5 -8.5
+4.5 +9.5 +8.5 +50 +50 14.2
mV mV mV
1 2 3
DVio
Input Offset Voltage, Average Temperature Coefficient Supply Current, no load Power Supply Rejection Ratio Output Current -Vcc = -4.5V to -5.0V, +Vcc = +4.5V to +5.0V
1 1
-50 -50
uV/C 2 uV/C 3 mA dB mA mA 1, 2, 3 1, 2, 3 1, 2 3 1, 2 3 1, 2 3 1, 2 3
Icc PSRR +Io
45 1 1 +50 +36 -50 -36 +3.2 +3.0 -3.2 -3.0
-Io
Output Current
1 1
mA mA V V V V
+Vo
Output Voltage Range Output Voltage Range
1 1
-Vo
1 1
5
MNCLC409A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
AC/DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Rl = 100 Ohms, Vcc = +5V dc, Av = +2, feedback resistor (Rf) = 250 Ohms, gain resistor (Rg) = 250 AC: Ohms -55 C < Ta < +125 C (Note 3) SYMBOL Rin PARAMETER Noninverting Input Resistance CONDITIONS NOTES 1 1 1 Cin Ro Noninverting Input Capacitance Output Impedance 1 1 1 CMRR SSBW Common Mode Rejection Ratio Small Signal Bandwidth Large Signal Bandwidth Gain Flatness Peaking Gain Flatness Peaking Gain Flatness Rolloff Gain Flatness Rolloff Vcm = +1.0V -3dB bandwidth, Vout < 2Vpp 1 1 1 LSBW -3dB bandwidth, Vout < 5Vpp 1 1 GFPL 0.1MHz to 75MHz, Vout < 0.5Vpp 2 GFPH > 75MHz, Vout < 0.5Vpp 2 GFR1 0.1MHz to 125MHz 2 GFR2 At 200MHz 2 2 LPD Linear Phase Deviation .01MHz to 100MHz 1 1 DG Differential Gain Rl = 150 Ohms, 3.58MHz, 4.43MHz 1 1 DP HD2 Differential Phase 2nd Harmonic Distortion Rl = 150 Ohms, 3.58MHz, 4.43MHz 2Vpp at 20MHz 2 1 45 250 200 90 80 0.4 0.4 0.8 0.8 1.0 1.0 2.2 3.0 2.0 0.8 1.0 .06 .07 .02 -52 -52 PINNAME MIN 500 1000 250 2 0.2 0.3 MAX UNIT SUBGROUPS
KOhms 1 KOhms 2 KOhms 3 pF 4, 5, 6
Ohms 1, 2 Ohms 3 dB MHz MHz MHz MHz dB dB dB dB dB dB dB dB dB 4, 5, 6 4, 6 5 4, 6 5 4 5, 6 4 5, 6 4 5, 6 4 5 6
Degre 4, 6 e Degre 5 e % % 4, 5 6
Degre 4, 5, e 6 dBc dBc 4 5, 6
6
MNCLC409A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
AC/DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Rl = 100 Ohms, Vcc = +5V dc, Av = +2, feedback resistor (Rf) = 250 Ohms, gain resistor (Rg) = 250 AC: Ohms -55 C < Ta < +125 C (Note 3) SYMBOL HD2L PARAMETER 2nd Harmonic Distortion 2nd Harmonic Distortion 3rd Harmonic Distortion 3rd Harmonic Distortion 3rd Harmonic Distortion Rise and Fall Time Rise and Fall Time Settling Time Overshoot 2Vpp at 5MHz CONDITIONS NOTES 1 1 HD2H 2Vpp at 60MHz 1 1 HD3 2Vpp at 20MHz 2 HD3L HD3H Trs Trl 2Vpp at 5MHz 2Vpp at 60MHz 2V step, Cl < 10pF, measured between 10% and 90% points 5V step, Cl < 10pF, measured between 10% and 90% points Cl < 10pF, 2V step at 0.1% of the final value 2V step, Cl < 10pF 1 1 1 1 1 Ts OS 1 1 1 SR VN Slew Rate Equivalent Input Noise, Noninverting Voltage Equivalent Input Noise, Inverting Current Vout = 4V step, Cl < 10pF, measured at +1V > 1MHz 1 1 1 > 1MHz 1 1 NCN Equivalent Input Noise, Noninverting Current Equivalent Input Noise, Total Noise Floor > 1MHz 1 1 > 1MHz 1 1 1000 2.8 3.1 18 20 4.0 4.5 -155 -154 PINNAME MIN MAX -81 -78 -44 -41 -65 -65 -76 -52 1.6 4.2 4.6 12 18 15 UNIT dBc dBc dBc dBc dBc dBc dBc dBc ns ns ns ns % % SUBGROUPS 4, 5 6 4, 5 6 4 5, 6 4, 5, 6 4, 5, 6 9, 10, 11 9, 11 10 9, 10, 11 9, 10 11
V/us 4, 5, 6 nV/Sq 4, 6 Rt nV/Sq 5 Rt pA/Sq 4, 6 Rt pA/Sq 5 Rt pA/Sq 4, 6 Rt pA/Sq 5 Rt dBm 1Hz dBm 1Hz 4, 6 5
ICN
SNF
7
MNCLC409A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
AC/DC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Rl = 100 Ohms, Vcc = +5V dc, Av = +2, feedback resistor (Rf) = 250 Ohms, gain resistor (Rg) = 250 AC: Ohms -55 C < Ta < +125 C (Note 3) SYMBOL INV PARAMETER Equivalent Input Noise, Total Integrated Noise Note 1: Note 2: Note 3: CONDITIONS 1MHz to 150MHz NOTES 1 1 PINNAME MIN MAX 47 52 UNIT uV uV SUBGROUPS 4, 6 5
Guaranteed, if not tested. This parameter is group A sample tested only and is excluded from final electrical testing, but is guaranteed to the limits specified. The algebraic convention, whereby the most negative value is a minimum and most positive is a maximum, is used in this table. Negative current shall be defined as convential current flow out of a device terminal.
8
MNCLC409A-X REV 0A0
MICROCIRCUIT DATA SHEET
Graphics and Diagrams
GRAPHICS# 07077HRA2 07086HRA2 E20ARE J08ARL P000406A P000446A CERDIP (J), 8 LEAD (B/I CKT) LCC (E), TYPE C, 20 TERMINAL (B/I CKT) LCC (E), TYPE C, 20 TERMINAL(P/P DWG) CERDIP (J), 8 LEAD (P/P DWG) CERDIP (J), 8 LEAD (PINOUT) LCC (E), TYPE C, 20 TERMINAL (PINOUT) DESCRIPTION
See attached graphics following this page.
9
N/C VINV VNON-INV -VCC
1 2 3 4
8 7 6 5
N/C +VCC VOUT N/C
CLC409J 8 - LEAD DIP CONNECTION DIAGRAM TOP VIEW P000406A
MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050
N
N/C VNON-INV N/C
VINV N/C
-VCC N/C N/C N/C N/C
4 5 6 7 8
3
2
1
20
19
18 17 16 15 14
N/C N/C N/C N/C VCC
9
10
11
12
13
N/C
N/C
N/C
Vout
N/C
CLC409E 20 - LEAD LCC CONNECTION DIAGRAM TOP VIEW P000446A
MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050
N
MNCLC409A-X REV 0A0
MICROCIRCUIT DATA SHEET
Revision History
Rev
0A0
ECN #
Rel Date
Originator
Shaw Mead
Changes
Initial MDS Release
M0003257 02/24/99
10

▲Up To Search▲

Price & Availability of NSC05213

	To Download NSC05213 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .