 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NJU7006 SUPER LOW OPERATING CURRENT AND LOW OFFSET VOLTAGE TINY SINGLE C-MOS OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJU7006 is a super low operating current and low offset voltage tiny single C-MOS operational amplifier. The input offset voltage is lower than 2mV ( max ) and the input bias current is as low as less than 1pA ( typ ),consequently the very small signal around the ground level can be amplified. The operating current is 3A ( typ ),and the output stage permits output signals to swing between both of the supply rails. Furthermore, the NJU7006 is packaged with very small MTP-5,therefore it can be especially applied to battery operated portable items. FEATURES Super Low Operating Current ( IDD=3.0A typ. ) Single Power Supply ( VDD=1.8~3.6V ) Low Offset Voltage ( VIO=2mV max.@ 3.0V ) Wide Output Swing Range ( VOM=2.9V min.@ 3.0V ) Low Bias Current ( IIB=1pA typ. ) Compensation Capacitor Incorporated Package Outline MTP5 C-MOS Technology EQUIVALENT CIRCUIT PACKAGE OUTLINE NJU7006F PIN CONFIGURATION Ver.2003-03-18 -1- NJU7006 ABSOLUTE MAXIMUM RATINGS ( Ta=25C ) PARAMETER Supply Voltage Differential Input Voltage Common Mode Input Voltage Power Dissipation Operating Temperature Range Storage Temperature Range SYMBOL VIN VID VIC PD Topr Tstg RATINGS 7 7 ( note1 ) -0.3~7 200 -40~+85 -55~+125 UNIT V V V mW C C ( note1 ) If the supply voltage ( VDD ) is less than 7V, the input voltage must not over the VDD level though 7V is limit specified. ( note2 ) Decoupling capacitor should be connected between VDD and VSS for the stable operation. ELECTRICAL CHARACTERISTICS ( Ta=25C,VDD=3.0V,RL= ) PARAMETER Input Offset Voltage Input Offset Current Input Bias Current Input Impedance Large Signal Voltage Gain Input Common Mode Voltage Range Maximum Output Swing Voltage Common Mode Rejection Ratio Supply Voltage Rejection Ratio Operating Current Slew Rate Unity Gain Bandwidth SYMBOL VIO IIO IIB RIN AVD VICM VOM1 VOM2 CMR SVR IDD SR Ft TEST CONDITION VIN=1/2VDD MIN. 60 0~2.5 VDD-0.1 55 60 0.02 TYP. 1 1 1 70 65 70 3.0 0.04 95 MAX. 2 VSS+0.1 4.5 UNIT mV pA pA T dB V V V dB dB A V/s kHz RL=10M RL=10M VIN=1/2VDD VDD=3.0~3.6V CL=10pF AV=40dB,CL=10pF ( note3 ) The source current is less than 0.29A ( at VOM/RL=2.9V/10M ). ( note4 ) The load capacitance ( CL ) is less than 200pF. [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. -2- Ver.2003-03-18 |
Price & Availability of NJU7006
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |