View E423118_982372.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FUJITSU MEDIA DEVICE DATA SHEET
DS04-23118-4E
ASSP Mobile Communication Systems
Piezoelectric SAW BPF (700 MHz to 1000 MHz)
F5CE Series (D2 type)
s DESCRIPTION
The F5CE-D2 series of SAW bandpass filters apply to the frequency range 700 MHz to 1000 MHz. These filters make it possible to provide high stop-band attenuation and excellent pass-band flatness due to using unique DMS (Double Mode SAW) technology as design method. Moreover, these filters are provided in small 3.0 mm sq. package. This contributes to reduce weight and size of mobile communication units. The F5CE-D2 series of SAW filters are suitable for interstage RF filter in mobile communication systems in the frequency range 700 MHz to 1000 MHz. Standard devices are available for AMPS/CDMA/TDMA, GSM, PDC800 and ISM900.
s FEATURES
* * * * * * Excellent stop-band attenuation Low insertion loss and low pass-band ripple Ultra compact and light package (3.0 mm sq.) External matching circuits are not required. (50 I/O) Surface mount package (SMT) Standard devices are available for mobile communication standards (AMPS/CDMA/TDMA, GSM, PDC800 and ISM900)
s PACKAGE
F5CE Series (D2 type)
s PIN ASSIGNMENT
(BOTTOM VIEW)
1 2 3
6
5
4
s PIN DESCRIPTION
Pin no. 1 2 3 4 5 6 Pin name GND IN GND GND OUT GND Ground Pin Input Pin Ground Pin Ground Pin Output Pin Ground Pin Description
s ABSOLUTE MAXIMUM RATINGS
Parameter Operating temperature Storage temperature Input power Input DC voltage Symbol Ta Tstg PIN Rating Min -30 -40 -5 Max +85 +100 +15 +5 Unit C C dBm V
WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
2
F5CE Series (D2 type)
s RECOMMENDED OPERATING CONDITION
Parameter Operating temperature Symbol Ta Value Min -30 Max +85 Unit C
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use piezoelectric devices within their recommended operating conditionranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand.
s STANDARD DEVICES
System Tx Rx Tx Rx Center frequency (MHz) 836.5 881.5 902.5 947.5 915.0 915.0 Band width (MHz) 25 25 25 25 7 26 Part symbol 32 33 34 35 38 36 Part number FAR-F5CE-836M50-D232 FAR-F5CE-881M50-D233 FAR-F5CE-902M50-D234 FAR-F5CE-947M50-D235 FAR-F5CE-915M00-D238 FAR-F5CE-915M00-D236 Remarks
AMPS/CDMA/TDMA GSM ISM900
3
F5CE Series (D2 type)
s ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE
1. AMPS/CDMA/TDMA (Tx) Part number : FAR-F5CE-836M50-D232
Parameter Insertion loss Pass-band ripple Absolute stop-band attenuation Pass-band VSWR (Return loss) Conditions 824 to 849 MHz 824 to 849 MHz DC to 800 MHz 869 to 1049 MHz 1049 to 1200 MHz 1200 to 2000 MHz 824 to 849 MHz Value Min 50 28 50 45 (9.5) Typ 2.7 0.9 66 33 60 50 1.8 (10.9) Max 3.5 1.6 2.0
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1REF 0 dB 2
1 : -2.643 dB 824 MHz 2 : -2.7135 dB 849 MHz 3 : -60.88 dB 800 MHz 4 : -34.243 dB 869 MHz
S11
1 U FS
1 : 39.861 0.0938
4 1 2 3
18.108 pF 824 MHz 2 : 84.996 -12.77 849 MHz 3 : 2.0156 -29.858 800 MHz 4 : 18.031 -140.37 869 MHz
4 3 CENTER 835 MHz S22 1 U FS
CENTER 835 MHz S11 SWR 1/ 3 REF 1 4
SPAN 300 MHz 1 : 1.2555 824 MHz 2 : 1.7589 849 MHz 3 : 33.646 800 MHz 4 : 34.335 869 MHz
SPAN 300 MHz 458.73 pF 824 MHz 2 : 84.547 -10.078 849 MHz 3 : 2.1123 -88.005 800 MHz 4 : 12.773 -134.22 869 MHz
1 : 40.059 2.375
1 2
4 1 2 CENTER 835 MHz SPAN 300 MHz 3 CENTER 835 MHz SPAN 300 MHz
4
F5CE Series (D2 type)
2. AMPS/CDMA/TDMA (Rx) Part number : FAR-F5CE-881M50-D233
Parameter Insertion loss Pass-band ripple Conditions 869 to 894 MHz 869 to 894 MHz DC to 779 MHz Absolute stop-band attenuation 779 to 849 MHz 914 to 970 MHz 970 to 1049 MHz 1049 to 2000 MHz Pass-band VSWR (Return loss) 869 to 894 MHz Value Min 50 45 28 50 40 (9.5) Typ 2.7 0.9 63 50 33 60 50 1.7 (11.7) Max 3.5 1.6 2.0
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1REF 0 dB 2
1 : -2.6219 dB 869 MHz 2 : -2.7063 dB 894 MHz 3 : -62.398 dB 849 MHz 4 : -33.178 dB 914 MHz
S11
1 U FS
1 : 48.748 -1.7109
4 1 2 3 4 3 CENTER 880 MHz S11 SWR 1/ 3 REF 1 4 SPAN 300 MHz 1 : 1.0512 869 MHz 2 : 1.8203 894 MHz 3 : 26.584 849 MHz 4 : 31.784 914 MHz CENTER 880 MHz S22 1 U FS
107.05 pF 869 MHz 2 : 89.652 -9.0273 894 MHz 3 : 2.2881 -23.078 849 MHz 4 : 16.703 -149.05 914 MHz
SPAN 300 MHz
1 : 48.572 -660.16 m 277.43 pF 869 MHz 2 : 88.297 -7.6133 894 MHz 3 : 2..3965 -21.153 849 MHz 4 : 14.922 -139.78 914 MHz 1 2
4 1 CENTER 880 MHz 3 2 SPAN 300 MHz CENTER 880 MHz SPAN 300 MHz
5
F5CE Series (D2 type)
3. GSM (Tx) Part number : FAR-F5CE-902M50-D234
Parameter Insertion loss Pass-band ripple Conditions 890 to 915 MHz 890 to 915 MHz DC to 845 MHz 845 to 870 MHz Absolute stop-band attenuation 925 to 935 MHz 935 to 980 MHz 980 to 1200 MHz 1200 to 3000 MHz Pass-band VSWR (Return loss) 890 to 915 MHz Value Min 50 45 5 28 50 30 (9.0) Typ 2.8 0.8 60 50 18 33 60 40 1.7 (11.7) Max 3.3 1.4 2.1
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1 REF 0 dB 2
4
1 : -2.705 dB 890 MHz 2 : -2.512 dB 915 MHz 3 : -60.125 dB 869 MHz 4 : -32.472 dB 935 MHz 5 : -63.11 dB 980 MHz
S11
1 U FS
1 : 54.355 -3.2813
1 2 3 5 4 5 CENTER 900 MHz S11 SWR 1/ 3 REF 1 4 SPAN 300 MHz 1 : 1.1118 5 890 MHz 2 : 1.5029 915 MHz 3 : 25.029 869 MHz 4 : 32.898 935 MHz 5 : 15.535 980 MHz CENTER 900 MHz S22 1 U FS 1 : 54.16
54.499 pF 890 MHz 2 : 73.234 -8.75 915 MHz 3 : 2.377 -21.645 869 MHz 4 : 16.141 -154.23 935 MHz 5 : 9.9835 -71.762 980 MHz
3
SPAN 300 MHz -2.3867 74.925 pF 890 MHz 2 : 72.748 -8.6719 915 MHz 3 : 2.3945 -20.338 869 MHz 4 : 14.781 -143.07 935 MHz 5 : 9.7883 -88.281 980 MHz
1 2
3 1 CENTER 900 MHz 2 SPAN 300 MHz CENTER 900 MHz 5
4
SPAN 300 MHz
6
F5CE Series (D2 type)
4. GSM (Rx) Part number : FAR-F5CE-947M50-D235
Parameter Insertion loss Pass-band ripple Conditions 935 to 960 MHz 935 to 960 MHz DC to 871 MHz Absolute stop-band attenuation 890 to 915 MHz 980 to 1025 MHz 1025 to 2000 MHz 2000 to 3000 MHz Pass-band VSWR (Return loss) 935 to 960 MHz Value Min 50 30 25 45 30 (9.0) Typ 2.7 0.7 66 40 34 48 33 1.9 (10.2) Max 3.3 1.4 2.1
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/1 REF 0 dB 2
4 3
1 : -2.838 dB 935 MHz 2 : -2.811 dB 960 MHz 3 : -43.265 dB 915 MHz 4 : -31.174 dB 980 MHz 5 : -62.902 dB 1025 MHz
S11
1 U FS
1 : 48.096 -11.426
1 2 5 3 4 5
14.898 pF 935 MHz 2 : 87.012 -15.473 960 MHz 3 : 3.3154 -11.977 915 MHz 4 : 12.32 -135.31 980 MHz 5 : 8.1797 -65.523 1025 MHz
CENTER 950 MHz S11 SWR 1/ 3 REF 1 4
SPAN 300 MHz 1 : 1.2585 5 935 MHz 2 : 1.8212 960 MHz 3 : 16.035 915 MHz 4 : 33.99 980 MHz 5 : 16.709 1025 MHz
CENTER 950 MHz S22 1 U FS
SPAN 300 MHz 15.199 pF 935 MHz 2 : 86.348 -15.438 960 MHz 3 : 3.269 -11.102 915 MHz 4 : 12.32 -133.48 980 MHz 5 : 8.2369 -63.543 1025 MHz
1 : 46.922 -11.199
1 2 3 4
1 2 CENTER 950 MHz SPAN 300 MHz CENTER 950 MHz 5 SPAN 300 MHz
7
F5CE Series (D2 type)
5. ISM900 (7 MHz Bandwidth) Part number : FAR-F5CE-915M00-D238
Parameter Insertion loss Pass-band ripple Conditions 911.5 to 918.5 MHz 911.5 to 918.5 MHz DC to 600 MHz Absolute stop-band attenuation 600 to 840 MHz 869 to 894 MHz 970 to 1500 MHz 1500 to 3000 MHz Pass-band VSWR (Return loss) 911.5 to 918.5 MHz Value Min 50 40 35 40 25 (9.5) Typ 3.2 0.3 66 35 40 45 28 1.8 (10.9) Max 3.5 1.0 2.0
(Ta = -30 C to +85 C) Unit dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1 REF 0 dB 2
1 : -3.133 dB 912.5 MHz 2 : -3.011 dB 920.5 MHz
S11
1 U FS
1 : 50.824 12.756
2.2248 pF 912.5 MHz 2 : 77.844 11 920.5 MHz
1 2
CENTER 915 MHz S11 SWR 1/ REF 1
SPAN 300 MHz 1 : 1.2879
CENTER 915 MHz S22 1 U FS
SPAN 300 MHz 2.4377 pF 912.5 MHz 2 : 74.648 11.52 920.5 MHz
1 : 50.184 13.977
912.5 MHz 2 : 1.6094 920.5 MHz
1 2
1 2 CENTER 915 MHz SPAN 300 MHz CENTER 915 MHz SPAN 300 MHz
8
F5CE Series (D2 type)
6. ISM900 (26 MHz Bandwidth) Part number : FAR-F5CE-915M00-D236
Parameter Insertion loss Pass-band ripple Conditions 902 to 928 MHz 902 to 928 MHz DC to 800 MHz Absolute stop-band attenuation 800 to 880 MHz 950 to 1080 MHz 1080 to 2000 MHz 2000 to 3000 MHz Pass-band VSWR (Return loss)
S21 log MAG 10 dB/ 1 REF 0 dB 2
(Ta = -30 C to +85 C) Value Min 50 45 28 45 25 (8.1) Typ 2.6 0.9 70 57 31 60 38 1.7 (11.7) Max 3.5 2.0 2.3 Unit dB dB dB dB dB dB dB (dB)
-1.4512
Remarks
902 to 928 MHz
1 : -2.4997 dB 902 MHz 2 : -2.5671 dB 928 MHz 3 : -61.414 dB 880 MHz 4 : -33.762 dB 950 MHz
S11
1U FS
1 : 42.717
121.59 pF 902 MHz 2 : 85.512 -8.3164 928 MHz 3 : 2.4141 -28.497 880 MHz
4
1 2 3
4 : 12.734 -135.52 950 MHz
4 3 CENTER 915 MHz 1 : 42.037
CENTER 915 MHz S11 SWR 1/ 3 REF 1 4
SPAN 300 MHz 1 : 1.2013 902 MHz 2 : 1.7442 928 MHz 3 : 28.381 880 MHz 4 : 32.443 950 MHz
SPAN 300 MHz -2.6191
S22
1U FS
67.368 pF 902 MHz 2 : 85.066 -10.973 928 MHz 3 : 2.3496 -28.755 880 MHz
1 2
4 : 12.492 -132.72 950 MHz
4 1 2 CENTER 915 MHz SPAN 300 MHz 3 CENTER 915 MHz SPAN 300 MHz
9
F5CE Series (D2 type)
s MEASURING CIRCUIT
2
5
1
3
4
6
1 to 6 : Pin numbers
s PART NUMBER DESIGNATION
[Designation example] FAR-F5CE- M (1) -D2 - (2) (3)
(1) Frequency designation : Specify the nominal frequency in six alphanumeric characters. Enter M (for MHz) at the decimal point. Refer to "sSTANDARD DEVICES". [Example] (2) Serial number 836.5 MHz 836M50 : Specify a characters from 01 to 99. Refer to "sSTANDARD DEVICES".
(3) Packing (Reeled tape) : Y : 1 k pcs/reel X : 5 k pcs/reel
s MARKING
LOGO PART SYMBOL
DATE CODE
LOT No.
INDEX
10
F5CE Series (D2 type)
s PACKAGE DIMENSION
3.0
2-R 0.2 1 2 3 0.75 0.6 0.4 6 4-R 0.3 1.2 1.2 5 4 0.75
1.5
1.2 Max
3.0
Dimensions in mm.
11
F5CE Series (D2 type)
s RECOMMENDED LAND PATTERN
3.0
3.0
0.75
0.70 1.5
1.20
1.20
0.2
0.75
1.5
0.95
Dimensions in mm.
12
F5CE Series (D2 type)
s PACKING
1. Reel Dimensions
9.5 0.5 1.5 Min 12.8 Min
250
20.2 Min R0.58
80
Type Y X
Volume 1 k pcs 5 k pcs
13.8 Max
Dimensions in mm.
2. Packing Style
Reel side
Pulling side
1PIN Pulling side
13
F5CE Series (D2 type)
3. Tape Dimensions
4.0 0.1 2.0 0.05 1.5 0.0
0.1
0.3 0.05
1.75 0.1 3.5 0.05
3.3 0.1
1.0 Min 3.3 0.1
4.0 0.1
1.3 0.1
Dimensions in mm.
4. Peel strength of top cover tape
Peel off by the force of 0.1 N to 1.0 N under the condition at the right. (Conforms to EIA)
Direction of pulling Speed 300 mm/min 165 to 180
Embossment carrier type tape
14
8.0 0.2
F5CE Series (D2 type)
s RECOMMENDED REFLOW PROFILE
240 10 s
Temperature (C)
Heating rate 1 C/s to 4 C/s 210
Air cooling 60 s Pre-Heating 150 60 s 90 s
Time (s)
s NOTE
A mass-produced product order is accepted by a unit of 1000.
15
F5CE Series (D2 type)
FUJITSU MEDIA DEVICES LIMITED
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU MEDIA DEVICES sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MEDIA DEVICES electronic device; FUJITSU MEDIA DEVICES does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MEDIA DEVICES assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MEDIA DEVICES or any third party or does FUJITSU MEDIA DEVICES warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MEDIA DEVICES assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU MEDIA DEVICES will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any electronic devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.
F0308 (c) FUJITSU LIMITED Printed in Japan

▲Up To Search▲

Price & Availability of E423118

	To Download E423118 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .