 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Video ICs Video signal switcher BA7613N / BA7613F The BA7613N and BA7613F are three-channel analog multiplexers with built-in mute, 6dB amplifier and 75 driver. The ICs designed for use in video cassette recorders, and feature a large dynamic range and wide operating frequency range. Sync-tip clamp inputs make this an ideal switch for video signals. *Applications recorders and televisions Video cassette *Features/ 1-output switches. 1) 3-input 2) 3) 4) 5) Built-in 6dB amplifier and 75 driver. Built-in mute. Sync-tip clamp inputs. Wide operating supply voltage range (4.5V ~ 13.0V, BA7613N) (4.5V ~ 9.5V, BA7613F). 6) Low power consumption (100mW Typ.). 7) Excellent frequency characteristics (10MHz, 0dB Typ.). 8) Wide dynamic range (3.5VP-P Typ.). 9) Low interchannel crosstalk ( - 65dB Typ., f = 4.43MHz). *Block diagram BA7613N MUTE 6dB Amp 75 Driver CTLA 2 6dB 75 BA7613F IN1 1 MUTE 8 VOUT 7 VCC LOGIC CTLB 3 LOGIC 6 IN3 IN2 1 IN1 2 CTLA 3 CTLB 4 IN2 5 GND 6 IN3 7 VCC 8 VOUT 4 5 GND *Truth table CTL A L (OPEN) L (OPEN) H H CTL B L (OPEN) H L (OPEN) H OUT IN 1 IN 2 IN 3 MUTE 1 Video ICs BA7613N / BA7613F *Absolute maximum ratings (Ta = 25C) Parameter Power supply voltage Power dissipation Operating temperature Storage temperature Symbol VCC Pd Topr Tstg Limits 113.5 / 210.0 19003 / 25504 Unit V mW C C - 25 ~ + 75 - 55 ~ + 125 1 BA7613N. 2 BA7613F. 3 Reduced by 9.0mW for each increase in Ta of 1C over 25C. 4 Reduced by 5.5mW for each increase in Ta of 1C over 25C. *Equivalent circuits CLAMP INPUT VCC VCC OUTPUT 100 IN 32 OUT Output impedance: 32 [Typ.] 1.2A 100A CTLA / CTLB VCC 20k 100 CTLA / CTLB 50k 34k 2 Video ICs BA7613N / BA7613F *Electrical characteristics (unless otherwise noted, Ta = 25V and VCC = 5V) Parameter Operating voltage Supply current Maximum output level Voltage gain Interchannel crosstalk Frequency characteristic CTL pin switch level A CTL pin switch level B Symbol VCC ICC Vom GV CT Cf VTH-A VTH-B Min. 4.5 -- 3.0 5.5 -- - 3.0 1.0 1.0 Typ. -- 20.0 3.5 6.0 - 65 0 2.0 2.0 Max. 13.0 28.5 -- 6.5 -- 1.0 3.0 3.0 Unit V mA VP-P dB dB dB V V Conditions BA7613F is Max.9.5V -- f = 1kHz, THD = 0.5% f = 1MHz, VIN = 1.0VP-P f = 4.43MHz, VIN = 1.0VP-P f = 10MHz / 1MHz, VIN = 1.0VP-P -- -- Not designed for radiation resistance. *Measurement circuit MUTE 1000 6dB Amp 75 Driver + 43 75 V ~ PP Logic 1 2 3 4 5 6 7 8 VCC A 0.022F 47F SW1 1 2 1 SW2 2 1 SW3 2 + 1F 1F OSC 1F OSC OSC ~ 50 1F ~ 50 1F ~ 50 1F SW4 1 23 1 SW5 23 VCC VCC Fig. 1 3 Video ICs BA7613N / BA7613F *Measurement conditions Parameter Current dissipation Maximum output level Voltage gain IN1 IN2 IN3 IN1 IN2 IN3 IN1IN2 IN1IN3 IN1MUTE IN2IN3 IN2MUTE IN3MUTE IN1 IN2 IN3 CTLA CTLB Symbol ICC Vom Vom Vom GV GV GV CT CT CT CT CT CT Gf Gf Gf VTH VTH Switch settings SW1 2 1 2 2 1 2 2 1 1 1 2 2 2 1 2 2 2 2 SW2 2 2 1 2 2 1 2 2 2 2 1 1 2 2 1 2 2 1 SW3 2 2 2 1 2 2 1 2 2 2 2 2 1 2 2 1 1 2 SW4 2 3 3 2 3 3 2 3 2 2 2 2 2 3 3 2 1 3 SW5 2 3 2 3 3 2 3 2 3 2 3 2 2 3 2 3 3 1 Measurement method Ammeter f = 1kHz THD = 0.5% 1 f = 1MHz, V = 1VP-P 2 Interchannel crosstalk f = 4.43MHz, V = 1VP-P 3 f = 10MHz / f = 1MHz, V = 1VP-P 4 Frequency characteristic CTL pin switching level 5 1: Connect a distortion meter to the output, and input a f = 1kHz sine wave. Adjust the input level until the output distortion is 0.5%. This output voltage at this time multiplied by 2 is the maximum output level Vom (VP-P). 2: Input a 1VP-P, 1MHz sine wave. The voltage gain is given by GV = 20 log (VOUT / VIN) + 6. 3: Input a 1VP-P, 4.43MHz sine wave. The interchannel crosstalk is given by CT = 20 log (VOUT / VIN). 4: Input 1VP-P, 1MHz and 10MHz sine waves. The frequency characteristic is given by Gf = 20 log (VOUT (f = 10MHz) / VOUT (f = 1MHz)). 5: Input a 1VP-P, 1MHz sine wave. Reduce the CTL pin voltage from VCC. The CTL pin switching level (VTH) is the CTL pin voltage at which the VOUT level drops below 20mVP-P. *Electrical characteristic curves 5 OUTPUT VOLTAGE: VOUT (VP-P) VCC = 12V 4 4 VOLTAGE GAIN: Cf (dB) CROSSTALK: CT (dB) VCC = 9V 2 3 20 0 - 20 0 -2 2 VCC = 5V - 40 1 -4 0 0 - 60 1 2 3 4 5 100k 300k 1M 3M 10M 30M 100M - 80 100k 300k 1M 3M 10M 30M 100M INPUT VOLTAGE: VIN (VP-P) FREQUENCY: f (Hz) FREQUENCY: f (Hz) Fig. 2 VIN vs. VOUT (f = 1kHz) Fig. 3 Frequency characteristics Fig. 4 Interchannel crosstalk notes *Operationimpedance is approximately 32. Therefore, The output to ensure output matching, connect an external resistor of 43. 4 Video ICs BA7613N / BA7613F *External dimensions (Units: mm) BA7613N BA7613F 5.0 0.2 19.3 0.2 5.8 0.2 10.5 0.5 2.8 0.2 8 6.2 0.3 4.4 0.2 5 1.2 1 3.5 0.5 2.54 8 0.6 0.8 1.3 0.3 0.1 1.5 0.1 1 4 0.11 1.27 0.4 0.1 0.3Min. 0.15 SIP8 SOP8 0.15 0.1 5 |
Price & Availability of A5800759
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |