View 5050_968306.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TS514, A
PRECISION QUAD OPERATIONAL AMPLIFIER
s LOW OFFSET VOLTAGE : 500V max. s LOW POWER CONSUMPTION s SHORT CIRCUIT PROTECTION s LOW DISTORTION, LOW NOISE s HIGH GAIN-BANDWIDTH PRODUCT s HIGH CHANNEL SEPARATION s ESD INTERNAL PROTECTION
N DIP14 (Plastic Package)
s MACROMODEL INCLUDED IN THIS
SPECIFICATION DESCRIPTION The TS514 is a high performance quad operational amplifier with frequency and phase compensation built into the chip. The internal phase compensation allows stable operation as voltage follower in spite of its high gain-bandwidth products. The circuit presents very stable electrical characteristics over the entire supply voltage range, and it particularly intended for professional and telecom applications (active filters, etc). PIN CONNECTIONS (top view)
D SO14 (Plastic Micropackage)
ORDER CODE
Package Part Number Temperature Range N TS514I TS514AI -40C, +125C -40C, +125C * * D * *
N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel (DT)
Output 1 Inverting Input 1 Non-inverting Input 1 V CC + Non-inverting Input 2 Inverting Input 2 Output 2
March 2001
1 2 3 4 5 6 7 + + + +
14 Output 4 13 Inverting Input 4 12 Non-inverting Input 4 11 VCC 10 Non-inverting Input 3 9 8 Inverting Input 3 Output 3
1/6
TS514, A
SCHEMATIC DIAGRAM (1/4 TS514)
ABSOLUTE MAXIMUM RATINGS
Symbol VCC Vi Vid Toper ptot Tstg Supply Voltage Input Voltage (positive) (negative) Parameter Value 18 +VCC -VCC - 0.5 (VCC - 1) -40 to +125 400 -65 to +150 C mW C Unit V
Differential Input Voltage Operating Free-Air Temperature Range Power Dissipation at Tamb = 70C Storage Temperature Range
2/6
TS514, A
ELECTRICAL CHARACTERISTICS VCC = 15V, Tamb = 25C (unless otherwise specified)
Symbol Icc Iib Ri Supply Current Input Bias Current Tmin Top Tmax Input Resistance, f = 1kHz Input Offset Voltage Vio Tmin Top Tmax Vio Iio Iio Ios Avd GBP en Input Offset Voltage Drift Tmin Top Tmax Input Offset Current Tmin Top Tmax Input Offset Current Drift Tmin Top Tmax Output Short Circuit Current Large Signal Voltage Gain RL = 2k Vcc = 15V Vcc = 4V 90 1.8 TS514 TS514A TS514 TS514A 5 5 20 40 nA nA ------C mA dB 100 95 3 8 10 18 0.03 15 MHz nV ----------Hz % 0.1 V Vcc = 15V Vcc = 4V f = 10kHz 0.8 90 dB f = 100Hz f = 1kHz 90 120 dB 13 3 Vpp 28 1.5 V/s dB 0.5 2.5 0.5 4 1.5 V/C Parameter Min. Typ. 1.4 50 1 Max. 2.4 150 300 Unit mA nA M mV
0.08 23
Gain-bandwidth Product, f = 100kHz Equivalent Input Noise Voltage, f = 1kHz Rs = 50 Rs = 1k Rs = 10k Total Harmonic Distortion Av = 20dB RL = 2k Vo = 2Vpp f = 1kHz Output Voltage Swing RL = 2k Large Signal Voltage Swing RL = 10k Slew Rate Unity Gain, RL = 2k Common Mode Rejection Ratio Vic = 10V Supply Voltage Rejection Ratio dVic = 10V Channel Separation,
THD
Vopp Vopp SR CMR SVR Vo1/Vo2
3/6
TS514, A
MACROMODEL ** Standard Linear Ics Macromodels, 1993. ** CONNECTIONS : * 1 INVERTING INPUT * 2 NON-INVERTING INPUT * 3 OUTPUT * 4 POSITIVE POWER SUPPLY * 5 NEGATIVE POWER SUPPLY .SUBCKT TS514 1 3 2 4 5 (analog) ******************************************************** .MODEL MDTH D IS=1E-8 KF=6.647807E-16 CJO=10F * INPUT STAGE CIP 2 5 1.000000E-12 CIN 1 5 1.000000E-12 EIP 10 5 2 5 1 EIN 16 5 1 5 1 RIP 10 11 1.300000E+01 RIN 15 16 1.300000E+01 RIS 11 15 6.437882E+01 DIP 11 12 MDTH 400E-12 DIN 15 14 MDTH 400E-12 VOFP 12 13 DC 0 VOFN 13 14 DC 0 IPOL 13 5 2.000000E-05 CPS 11 15 9.75E-10 DINN 17 13 MDTH 400E-12 VIN 17 5 0.000000e+00 DINR 15 18 MDTH 400E-12 VIP 4 18 1.500000E+00 FCP 4 5 VOFP 1.525000E+01 FCN 5 4 VOFN 1.525000E+01 FIBP 2 5 VOFN 5.000000E-03 ELECTRICAL CHARACTERISTICS Vcc = 15V, Tamb = 25C (unless otherwise specified)
Symbol Vio Avd Icc Vicm VOH VOL Isink Isource GBP SR m RL = 2k RL = 2k Vo = 0V Vo = 0V RL = 2k, CL = 100pF RL = 2k, CL = 100pF RL = 2k, CL = 100pF RL = 2k No load, per operator Conditions Value 0 94 325 -15 to 13.5 +13 -13 24 24 3 1.4 55 Unit mV V/mV A V V V mA mA MHz V/s Degrees
FIBN 5 1 VOFP 5.000000E-03 * AMPLIFYING STAGE FIP 5 19 VOFP 1.125000E+03 FIN 5 19 VOFN 1.125000E+03 RG1 19 5 6.512062E+05 RG2 19 4 6.512062E+05 CC 19 29 1.500000E-08 HZTP 30 29 VOFP 8.944787E+02 HZTN 5 30 VOFN 8.944787E+02 DOPM 19 22 MDTH 400E-12 DONM 21 19 MDTH 400E-12 HOPM 22 28 VOUT 6.521739E+03 VIPM 28 4 1.500000E+02 HONM 21 27 VOUT 6.521739E+03 VINM 5 27 1.500000E+02 GCOMP 5 4 4 5 7.485029E-04 RPM1 5 80 1E+09 RPM2 4 80 1E+09 GAVPH 5 82 19 80 2.99E-03 RAVPHGH 82 4 668 RAVPHGB 82 5 668 RAVPHDH 82 83 1000 RAVPHDB 82 84 1000 CAVPHH 4 83 0.352E-09 CAVPHB 5 84 0.352E-09 EOUT 26 23 82 5 1 VOUT 23 5 0 ROUT 26 3 150 COUT 3 5 1.000000E-12 DOP 19 25 MDTH 400E-12 VOP 4 25 1.785252E+00 DON 24 19 MDTH 400E-12 VON 24 5 1.785252E+00 .ENDS
4/6
TS514, A
PACKAGE MECHANICAL DATA 14 PINS - PLASTIC DIP
Millimeters Dim. Min. a1 B b b1 D E e e3 F i L Z 0.51 1.39 0.5 0.25 20 8.5 2.54 15.24 7.1 5.1 3.3 1.27 2.54 0.050 Typ. Max. 1.65 Min. 0.020 0.055
Inches Typ. Max. 0.065 0.020 0.010 0.787 0.335 0.100 0.600 0.280 0.201 0.130 0.100
5/6
TS514, A
PACKAGE MECHANICAL DATA 14 PINS - PLASTIC MICROPACKAGE (SO)
L C
G c1
a2 b e3 D M e
A
s E
14 1
8 7 F
Millimeters Dim. Min. A a1 a2 b b1 C c1 D (1) E e e3 F (1) G L M S 0.1 0.35 0.19 0.5 45 (typ.) 8.55 5.8 1.27 7.62 3.8 4.6 0.5 4.0 5.3 1.27 0.68 8 (max.) 0.150 0.181 0.020 8.75 6.2 0.336 0.228 Typ. Max. 1.75 0.2 1.6 0.46 0.25 Min. 0.004 0.014 0.007
a1
Inches Typ. Max. 0.069 0.008 0.063 0.018 0.010 0.020 0.344 0.244 0.050 0.300 0.157 0.208 0.050 0.027
Note : (1) D and F do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.066 inc) ONLY FOR DATA BOOK.
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom (c) http://www.st.com
6/6
b1

▲Up To Search▲

Price & Availability of 5050

	To Download 5050 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .