View 1607_963167.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number: EN 4089
Monolithic Linear IC
LA6511
Power Operational Amplifier
Overview
The LA6511 is a BLT-dedicated 1-channel driver developed for use in consumer and industrial equipment. (Do not use with power supply)
Package Dimensions
unit : mm
3024A-SIP10H
[LA6511]
27.0 20.0 R1.7 4.0
Features and Functions
1 1.4 0.5 2.54
10 2.07 0.4 2.0
SANYO : SIP10H
Specifications
Maximum Ratings at Ta = 25 C
Parameter Maximum supply voltage Differential input voltage Input common-mode voltage range Allowable power dissipation Operating temperature Storage temperature Symbol VCCmax VID VIN Pd max Topr Tstg Ratings 24 24 24 3.1 -20 to +75 -55 to +150 Unit V V V W C C
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
51695HA(II) No.4089-1/4
1.0 min 6.0
. High output current (I max = 2.0 A) . High gain . Wide operating voltage range (4 to 24 V) . Includes mute circuit (active low)
O
7.0
11.8 13.2max
8.4
LA6511
Operating Characteristics at Ta = 25 C, VCC = 12V
Parameter Current drain with no load Input offset voltage Input offset voltage difference Input offset current Input bias current Input common-mode voltage range Common-mode signal rejection ratio Maximum output voltage Voltage gain Slew rate Supply voltage rejection ratio Mute-off voltage Mute pin output current Symbol ICC VIO DVIO IIO IB VICM CMR VO VGO SR SVR VMOFF IMUTE Conditions RS % 10 k RS % 10 k min 17 typ 25 3 1 10 50 80 8 85 0.15 30 1.0 40 max 35 7 3 100 500 10 Unit mA mV mV nA nA V dB V dB V/s V/V V A
0.5 70 RL = 8.0
Notes) Thermal shutdown function on chip. The mute voltage operates versus the VMref voltage.
. .
Allowable power dissipation,Pd max - W
With infinitely large heat sink
Al heat sink Tightening torque: 4 kg cm Coated with silicone grease
Thermal resistance of heat sink, f - C/W
.
Al heat sink t = 1.5 mm Tightening torque: 4 kg cm Coated with silicone grease
.
No heat sink
Storage temperature, Ta - C
Area of heat sink, Sf - cm2
No.4089-2/4
LA6511
Pin Assignment
Sample Application Circuit
No.4089-3/4
LA6511
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of May, 1995. Specifications and information herein are subject to change without notice. PS No.4089-4/4

▲Up To Search▲

Price & Availability of 1607

	To Download 1607 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .