View 0318_961539.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Transistor
2SD1991A
Silicon NPN epitaxial planer type
For general amplification Complementary to 2SB1320A
6.90.1
Unit: mm
1.05 2.50.1 (1.45) 0.05 0.8
q q q
0.45-0.05
0.45-0.05
+0.1
s Absolute Maximum Ratings
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO ICP IC PC Tj Tstg
(Ta=25C)
1
2.50.5 2
2.50.5 3
60 50 7 200 100 400 150 -55 ~ +150
V V V mA mA mW C C
1.20.1 0.65 max. 0.45+0.1 - 0.05
Note: In addition to the lead type shown in the upper figure, the type as shown in the lower figure is also available.
1:Emitter 2:Collector 3:Base MT1 Type Package
2.50.1
Ratings
Unit
+0.1
(HW type)
s Electrical Characteristics
Parameter Collector cutoff current Collector to base voltage Collector to emitter voltage Emitter to base voltage Forward current transfer ratio Collector to emitter saturation voltage Transition frequency Collector output capacitance
*h
(Ta=25C)
Symbol ICBO ICEO VCBO VCEO VEBO hFE1 hFE2 VCE(sat) fT Cob
*
Conditions VCB = 20V, IE = 0 VCE = 20V, IB = 0 IC = 10A, IE = 0 IC = 2mA, IB = 0 IE = 10A, IC = 0 VCE = 10V, IC = 2mA VCE = 2V, IC = 100mA IC = 100mA, IB = 10mA VCB = 10V, IE = -2mA, f = 200MHz VCB = 10V, IE = 0, f = 1MHz
min
typ
max 1 1
14.50.5
0.85
High foward current transfer ratio hFE. Low collector to emitter saturation voltage VCE(sat). Allowing supply with the radial taping.
0.65 max.
1.0
3.50.1
s Features
0.15
0.7
4.0
0.8
Unit A A V V V
60 50 7 160 90 0.1 150 3.5 0.3 460
V MHz pF
FE1
Rank classification
Q 160 ~ 260 R 210 ~ 340 S 290 ~ 460
Rank hFE1
1
Transistor
PC -- Ta
500 60 Ta=25C IB=160A 50 1000
2SD1991A
IC -- VCE
1200 VCE=10V Ta=25C
IB -- VBE
Collector power dissipation PC (mW)
Collector current IC (mA)
400
40
Base current IB (A)
140A 120A 100A 30 80A 20 60A 40A 10 20A
800
300
600
200
400
100
200
0 0 20 40 60 80 100 120 140 160
0 0 2 4 6 8 10
0 0 0.2 0.4 0.6 0.8 1.0
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Base to emitter voltage VBE (V)
IC -- VBE
200 VCE=10V 200 240 VCE=10V Ta=25C
IC -- I B
Collector to emitter saturation voltage VCE(sat) (V)
100 30 10 3 1 0.3 0.1 0.03 0.01 0.1
VCE(sat) -- IC
IC/IB=10
Collector current IC (mA)
Collector current IC (mA)
160
160
120 25C Ta=75C 80 -25C
120
80
25C
40
Ta=75C -25C
40
0 0 0.4 0.8 1.2 1.6 2.0
0 0 200 400 600 800 1000
0.3
1
3
10
30
100
Base to emitter voltage VBE (V)
Base current IB (A)
Collector current IC (mA)
hFE -- IC
600 VCE=10V 1000
hFE -- IC
300 VCE=5V
fT -- I E
VCB=10V Ta=25C
Forward current transfer ratio hFE
Forward current transfer ratio hFE
500
800
Transition frequency fT (MHz)
100 1000
240
400
Ta=75C 25C
600
Ta=125C 75C
180
300
-25C
400
200
25C -25C
120
100
200
60
0 0.1
0.3
1
3
10
30
100
0 0.1
1
10
0 - 0.1 - 0.3
-1
-3
-10
-30
-100
Collector current IC (mA)
Collector current IC (mA)
Emitter current IE (mA)
2
Transistor
Cob -- VCB
12
2SD1991A
NV -- IC
IE=0 f=1MHz Ta=25C 240 VCE=10V Ta=25C Function=FLAT 100
h Parameter -- IC
VCE=5V f=270Hz
Collector output capacitance Cob (pF)
10
200
30
6
120
Rg=100k
h Parameter
8
Noise voltage NV (mV)
160
10 hfe (x100)
3
4
80 22k 40 4.7k
1
hoe (10-1S)
hre (x10-4)
2
0.3 hie (x10k)
0 1 3 10 30 100
0 10
30
100
300
1000
0.1 0.1
0.3
1
3
10
Collector to base voltage VCB (V)
Collector current IC (A)
Collector current IC (mA)
3
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of 0318

	To Download 0318 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .