View ZL60003TBD_737724.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ZL60007 1310nm, 1550nm 622Mbps PIN with Preamplifier
Data Sheet
May 2003
Ordering Information ZL60007/TBD TO-46 with lens
-40C to +85C
Features
* * * * * Data rate up to 622Mbps 1310, 1550 nm PIN TIA with AGC TO-46 Assembly 3.3V power supply
Description
This optical receiver is a 3.3V device which contains an InGaAs PIN photodiode and a transimpedance amplifier with Automatic Gain Control and DC restore circuit assembled in a TO-46 package. It is designed for ATM and SDH/Sonet 622Mbps. Its double-lens optical system is designed for single mode fiber as well as for multimode fiber with a core diameter up to 62.5m. Reliability Assurance based on Telcordia GR468-CORE.
Applications
* * * Sonet OC-12 SDH STM-4 ATM 622Mbps
Data Out
VCC
Data Out
VCC
Data Out Data
Data Out Data Case GND
GND
Bottom View
Figure 1 - Pin Diagram
Figure 2 - Functional Schematic
1
ZL60007
Optical and Electrical Characteristics
Parameter Responsivity, differential Symbol R Min 14 Typ 22 Max 33 Unit kV/W
Data Sheet
Test condition =1310nm, RL=100, Note 1
Output Voltage amplitude, differential Bandwidth (3dBel) Optical Saturation Level (average) Noise-Equivalent Power Sensitivity (BER 10-9) Dynamic Range Output Resistance (single) Power Dissipation Power Supply Current
Note Note Note Note Note 1: 2: 3: 4: 5:
Vo fc Psat NEP S 0
1.4 450 3 -40 -32 35 -30
V MHz dBm dBm dBm dB 165 45 mW mA
RL=100,
ER = Note 2
Pf = 10W, RL = 100 =1310nm ER = Note 3 =1310nm Note 4 =1310nm
ER = Note 3, 5
RO PD IDD
50 90 30
Operating conditions: 25C Case Temperature/3.3 V Supply Voltage/Fiber: Singlemode to multimode 62.5/125m
P f=5W Peak-Peak power at 10MHz/50% duty cycle Pf = 1mW average power BER 10 -9 with a 2 23-1 PRBS at 622Mbps Measured with STM-4 filter on electrical output. i.e. 467 MHz Penalty at 10-10 BER equals 0.26 dB
Absolute Maximum Ratings
Parameter Supply Voltage Storage Temperature Symbol VCC Tstg Min 0 -55 Max 4.5 125 Unit V C
Recommended Operating Conditions
Parameter Supply Voltage Output Differential Load, Note 6 Operating Temperature
Note 6:
Symbol VCC RL TOP
Min 3.0 100 -40
Typ 3.3 1000
Max 3.6 85
Unit V C
The typical value corresponds to the load presented by a following limiting amplifier
2
Zarlink Semiconductor Inc.
Data Sheet Typical Responsivity
ZL60007
Fiber Core/cladding Diameter Numerical Aperture Wavelength 10/125m, NA=0.11 22kV/W 27kV/W 50/125m, NA=0.20 22kV/W 27kV/W 62.5/125m, NA=0.275 22kV/W 27kV/W
Differential responsivity Differential responsivity
1310nm 1550nm
1 0.9 0.8
1 0.9 0.8
Relative Responsivity
0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5
Relative Responsivity
0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 10 20 30 40 50 60 70 80 90 100 110 120
z- A xial Displacement o f Fiber (mm) at r-o pt, relative TO-46 lens
R-Radial Displacement of Fiber ( m) at z=opt
Figure 3 - Typical Responsivity vs Axial Displacement for a Multimode Fiber
% 100
Figure 5 - Typical Responsivity vs Radial Displacement for a Multimode Fiber
Relative Responsivity
50
0
800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 nm
Wavelength
Figure 4 - Responsivity vs. Wavelength of Coupled Input Power
Zarlink Semiconductor Inc.
3
ZL60007
Data Sheet
100
10
Resp (kV/W)
10
1 Output (V) Response OIPvsOutput
1
0.1
0.1 0.0001
0.01 0.001 0.01 Pavg (m W) 0.1 1
Figure 6 - Output Voltage vs Input Power
Application Guidelines
ESD handling The receiver is sensitive to electrostatic discharges. When handling the device, precautions for ESD sensitive devices should be taken. These precautions include use of ESD protected work area with wrist straps, controlled work benches, floors etc.
Power Supply Filter
Power Supply decoupling capacitors are recommended for optimal performance of the receiver. A filter is recommended to minimize power supply noise. See Figure 7.
Host VCC
L 10 H C 0.1 F C 10nF
PIN / Preamp
Figure 7 - Recommended Power Supply Filter
4
Zarlink Semiconductor Inc.
Data Sheet Data Outputs
ZL60007
The outputs Data and Data signals, are designed to drive a high load >500'. It is recommended to use Mindspeed MC2044C postamplifier (Rin~4.5') together with ZL60007.
ZL60007 output MC2044C
C 10nF C 10nF
Figure 8 - Recommended Post Amplifier and Coupling Capacitors
Zarlink Semiconductor Inc.
5
BOTTOM VIEW ( 10 : 1 )
3,8
SIDE VIEW
13,460,76
2,54
n1,17 + 0,05 (3x) n0,45 + 0,04 (4x) -
0,6 0,03 * Brazed
0
R2,7 45
n1,02 max
n4,7
3, 6
1, 02
0,33 max Lens n1.50.05 R0,4 max
NOTES:1. All dimensions in mm. 2. General tol. ISO-2768-mK. 3. Coating: Case: Ni 1,5-2,5 m. Header: Ni min 0,5 m / Au min 1,5 m.
* 0,25 max glass overmould (3x)
(c) Zarlink Semiconductor 2002. All rights reserved.
Package code Previous package codes
Drawing type
ISSUE ACN DATE
1
JS0 04078R1A
TB
Package drawing, TO-46 with lens Title
22-MAR-03
APPRD. TD/BE
JS004078
For more information about all Zarlink products visit our Web Site at
www.zarlink.com
Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively "Zarlink") is believed to be reliable. However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink. This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink's conditions of sale which are available on request.
Purchase of Zarlink's I2C components conveys a licence under the Philips I2C Patent rights to use these components in and I2C System, provided that the system conforms to the I2C Standard Specification as defined by Philips. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright Zarlink Semiconductor Inc. All Rights Reserved.
TECHNICAL DOCUMENTATION - NOT FOR RESALE

▲Up To Search▲

Price & Availability of ZL60003TBD

	To Download ZL60003TBD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .