 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| K3100G Series 14 pin DIP, 5.0 Volt, Clock Oscillator THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. 3.3V Crystal Clock Oscillators PLEASE REFER TO THE MHO3 PRODUCT SERIES. TTL/CMOS Compatible Tight Symmetry (45/55%) Available TTL/CMOS Compatible Tri-State Option Available Tight Symmetry (45/55%) Available 100ppm Stability Standard - K3100GC Tri-State Option Available Tighter Stabilities Available 100ppm Stability Standard - K3100GC 25ppm Stability:- K3100GA Tighter Stabilities Available 50ppm Stability:- K3100GB 25ppm Stability:- K3100GA Case Ground for EMI Protection 50ppm Stability:- K3100GB Case Ground for EMI Protection K3100G Series K3100G Series 3.3V Crystal Clock Oscillators E L E C T R I C A L S P E C I F I C AT I O N S MODEL Frequency Range (MHz) MODEL Frequency Stability (ppm) Frequency Range (MHz) Overall Frequency Stability (ppm) 0C to Overall70C -40C to 85C 0C to 70C Temperature Range (C) -40C to 85C Operating Temperature Range (C) Storage Operating Supply Voltage (V) Storage Supply Current (mA) Supply Voltage (V) Output CMOS Supply Current (mA) Output CMOS K3100GAC T R I C A L K3100GB I F I C AT I O N S K3100GC ELE SPEC K3100GA 1.0 to 125 K3100GB 1.0 to 125 Inclusive of calibration, temperature, voltage, load, shock,vibration, aging 25 50 100 Inclusive of calibration, temperature, voltage, load, shock,vibration, aging N/A 25 N/A 50 50 50 -40C to +85C -55C to +125C -40C to +85C +3.3 5% -55C to +125C <30 +3.3 5% <30 0.9 VCC 0.1 0.9 VCC Up to 80MHz0.1 V >80MHz 30pF 50pF; CC <10 Up to 80MHz 50pF; >80MHz 30pF 40/60 <10 10ps RMS @ 100MHz 40/60 <10 10ps RMS @ 100MHz <10 100 100 100 K3100GC "0" Level (VOL) "1" "0" Level (VOL)) OH Load Level (V "1" OH) TR & TF (ns) Load Symmetry (%) TR & TF (ns) Jitter (Typical) Symmetry (%) Start up Time (ms) Jitter (Typical) Start up Time (ms) PA R T N U M B E R I N G G U I D E K3100GXXXX - SpecifyT N U M B E R I N G G U I D E PA R Frequency K3100GXXXX - Specify "Blank" = Fixed Frequency Frequency "E" = Tri-State Frequency "Blank" = Fixed "Blank" = 0oC to 70oC Operating Temperature "E" = Tri-State "M" = -40oC to 85oC Operating Temperature "Blank" = 0oC to 70oC Operating Temperature "Blank" = 40/60% Symmetry "M" = -40oC to 85oC Operating Temperature "S" = 45/55 Symmetry "Blank" = 40/60% Symmetry "A" 25ppm Frequency Stability (Available 0/70oC only) "S" = 45/55 Symmetry "B" 25ppm Frequency Stability (Available 0/70oC only) "A" = 50 ppm Frequency Stability "C" = 50 ppm Frequency Stability "B" = 100ppm Frequency Stability "C" = 100ppm Frequency Stability MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact Phone: 847.451.1000requirements: MtronPTI 1-800-762-8800. us for your application specific 2553 N. Edgington Street, Franklin Park, IL 60131 Fax: 847.451.7585 2553 N. Edgington Street, Franklin Park, IL 60131 Phone: 847.451.1000 800-888-1499 or www.champtech.com Fax: 847.451.7585 Revision: 03-02-07 K3100G Series 14 pin DIP, 5.0 Volt, Clock Oscillator THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. 3.3V Crystal Clock Oscillators PIN FUNCTION PLEASE REFER TO THE MHO3 PRODUCT SERIES. 1 PIN 7 8 1 14 7 8 14 N/C / Tri-State FUNCTION Ground Output N/C / Tri-State + VCC Ground Output + VCC K3100G Series 3.3VK3100G Oscillators Crystal Clock Series SHIPPING TUBE CROSS SECTION SHIPPING TUBE CROSS SECTION OUTPUT WAVEFORM OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM TEST CIRCUIT DIAGRAM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B MIL-STD-883, Mtd 2002, Cond. B MIL-STD-833, Mtd 1010, Cond. B MIL-STD 883, Mtd 2007, Cond. B MIL-STD-883, Mtd 2002, Cond. B MIL-STD-202, 103 -55C to +125C; Air-to-Air; 100 cycles; 10 min. dwell DESCRIPTION 1500 g's +125C; Air-to-Air; 100 cycles; 10 -55C to min. dwell 0.06 inch; 15g's; 3 planes 20-2000 Hz; 1500 90%-95% R.H.; 56 days 40C;g's 20-2000 0C; Water-to-Water; planes 100C to Hz; 0.06 inch; 15g's; 315 cycles 40C;to 4 KV Threshold days 2 KV 90%-95% R.H.; 56 100C dip; Meniscograph Criteria Solder to 0C; Water-to-Water; 15 cycles Mass spectro. 2 x 10-8 2 KV to 4 KV Thresholdatmos. CC/sec He TEST METHODS Mechanical Shock Temperature Cycle Vibration Mechanical Shock Humidity Steady State Vibration Shock Thermal Humidity Steady State Electrostatic Discharge Thermal Shock Solderability Hermeticity Electrostatic Discharge Solderabilityto Soldering Resistance Lead Integrity Hermeticity Resistance to Soldering Marking Permanence Lead Integrity Life Test REFERENCE PROCEDURES MIL-STD 883, Mtd 2007, Cond. BB MIL-STD-883, 1011.7 Cond. MIL-STD-202, Mtd 103 Class II MIL-STD-883, 3015 MIL-STD-883, Mtd 1011.7 Cond. B 2022.2 1014.8, Cond. MIL-STD-883, Mtd 3015 Class II A1 MIL-STD-883, Mtd 2022.2Cond. J Solder dip;seconds MIL-STD-202, 210D, 235C; 30 Meniscograph Criteria 2004.5, A, Lead spectro. x 10-8 atmos. CC/sec He MIL-STD-883, Mtd 1014.8, Cond. A1B1 Mass tension &2bend stress MIL-STD-202, Mtd 210D, Cond. J 235C; 30 seconds MIL-STD-883, 2015.8 Resistance to solvents MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress minimum 1005.6 125C, powered, 1000 hours MIL-STD-883, Mtd 2015.8 Resistance to is assumed Marking Permanence changes to the product(s) and service(s) described herein without notice. No liabilitysolvents as a result of their use or application. MtronPTI reserves the right to make Street, Franklin Park, IL 60131 2553 N. Edgington Phone: 847.451.1000 Fax: 847.451.7585 MIL-STD-883, detailed datasheets. Contact us for 125C, powered, 1000 hours minimum Life Test Please see www.mtronpti.com for our complete offering andMtd 1005.6 your application specific requirements: MtronPTI 1-800-762-8800. 800-888-1499 2553 N. Edgington Street, Franklin Park, ILor www.champtech.com 60131 Phone: 847.451.1000 800-888-1499 or www.champtech.com Fax: 847.451.7585 Revision: 03-02-07 2 |
Price & Availability of K3100GAE
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |