|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Lead-free Green LMN200B01 200 mA LOAD SWITCH FEATURING PRE-BIASED PNP TRANSISTOR AND N-MOSFET WITH PULL DOWN RESISTOR General Description * LMN200B01 is best suited for applications where the load needs to be turned on and off using control circuits like micro-controllers, comparators, etc., particularly at a point of load. It features a discrete pass transistor with stable VCE(SAT) which does not depend on the input voltage and can support continuous maximum current of 200 mA. It also contains a discrete N-MOSFET that can be used as control. This N-MOSFET also has a built-in pull down resistor at its gate. The component can be used as a part of a circuit or as a stand alone discrete device. NEW PRODUCT 6 5 4 1 2 3 Fig. 1: SOT-26 Features * * * * * * Voltage Controlled Small Signal Switch N-MOSFET with Gate Pull-Down Resistor Surface Mount Package Ideally Suited for Automated Assembly Processes Lead Free By Design/ROHS Compliant (Note 1) "Green" Device (Note 2) C_Q1 6 B_Q1 5 S_Q2 4 C Q1 PNP Mechanical Data * * * * * * * * Case: SOT-26 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture sensitivity: Level 1 per J-STD-020C Terminal Connections: See Diagram Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking & Type Code Information: See Last Page Ordering Information: See Last Page Weight: 0.016 grams (approximate) Sub-Components DDTB142JU_DIE DSNM6047_DIE Reference Q1 Q2 Device Type PNP Transistor N-MOSFET DDTB142JU_DIE R2 B 470 R3 37K E R1 10K S Q2 NMOS G DSNM6047_DIE D 1 E_Q1 2 G_Q2 3 D_Q2 Fig. 2 Schematic and Pin Configuration R1 (NOM) 10K R2 (NOM) 470 R3 (NOM) 37K Figure 2 2 Maximum Ratings, Total Device @ TA = 25C unless otherwise specified Characteristic Power Dissipation (Note 3) Power Derating Factor above 125C Output Current Symbol Pd Pder Iout Value 300 2.4 200 Unit mW mW/C mA Thermal Characteristics Characteristic Junction Operation and Storage Temperature Range Thermal Resistance, Junction to Ambient Air (Note3) (Equivalent to one heated junction of PNP transistor) Notes: Symbol Tj,Tstg RJA Value -55 to +150 417 Unit C C/W 1. No purposefully added lead. 2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Device mounted on FR-4 PCB, 1 inch x 0.85 inch x 0.062 inch; pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. DS30651 Rev. 7 - 2 1 of 10 www.diodes.com LMN200B01 (c) Diodes Incorporated NEW PRODUCT Maximum Ratings: Sub-Component Device: Pre-Biased PNP Transistor (Q1) Characteristic Collector-Base Voltage Collector-Emitter Voltage Supply Voltage Input Voltage Output Current Symbol VCBO VCEO Vcc Vin IC @ TA = 25C unless otherwise specified Value -50 -50 -50 +5 to -6 -200 Unit V V V V mA Sub-Component Device: N-MOSFET with Gate Pull-Down Resistor (Q2) @ TA = 25C unless otherwise specified Characteristic Drain-Source Voltage Drain Gate Voltage (RGS 1M) Gate-Source Voltage Drain Current (Page 1: Note 3) Continuous Source Current Continuous Pulsed (tp<50 uS) Continuous (Vgs = 10V) Pulsed (tp <10 uS, Duty Cycle <1%) Symbol VDSS VDGR VGSS ID IS Value 60 60 +/-20 +/-40 115 800 115 Unit V V V mA mA DS30651 Rev. 7 - 2 2 of 10 www.diodes.com LMN200B01 Electrical Characteristics: Pre-Biased PNP Transistor (Q1) @ TA = 25C unless otherwise specified Unit nA nA mA V V V V nA V V V V V V V V mA V V K K Test Condition VCB = -50V, IE = 0 VCE = -50V, IB = 0 VEB = -5V, IC = 0 IC = -10A, IE = 0 IC = -2 mA, IB = 0 VCE = -5V, IC = -100A VCC = -5V, VB = -0.05V, RL = 1K VCC = -50V, VI = 0V IC = -10 mA, IB = -0.5 mA IC = -50mA, IB = -5mA IC = -20mA, IB = -1mA IC = -100mA, IB= -10mA IC = -200mA, IB= -10mA IC = -200mA, IB = -20mA IC = -200mA, IB = -10mA VCE = -5V, IC = -20 mA VCE = -5V, IC = -50 mA VCE = -5V, IC = -100 mA VCE = -5V, IC = -200 mA VO = -0.3V, IC = -2 mA VCC = -5V, VB = -2.5V, Io/II = -50mA /-2.5mA VI = -5V VCE = -5V, IC = -200mA IC = -50mA, IB = -5mA IC = -80mA, IB = -8mA VCE = -10V, IE = -5mA, f = 100MHz VCB = -10V, IE = 0A, f = 1MHz NEW PRODUCT Characteristic OFF CHARACTERISTICS Collector-Base Cut Off Current Collector-Emitter Cut Off Current Emitter-Base Cut Off Current Emitter-Base Cut Off Current Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Output Voltage Output Current (leakage current same as ICEO) ON CHARACTERISTICS Symbol ICBO ICEO IEBO V(BR)CBO V(BR)CEO VI(OFF) VOH IO(OFF) Min -50 -50 -4.9 Typ -0.5 -0.55 150 215 245 250 -0.7 -0.065 -9.2 -1.125 -3.2 -4.55 0.47 10 21 Max -100 -500 -1 -0.3 -500 -0.15 -0.2 -0.2 -0.25 -0.25 -0.3 1.5 -0.15 -13 -1.3 -3.6 -5.5 Collector-Emitter Saturation Voltage VCE(SAT) Equivalent on-resistance* RCE(SAT) 60 60 60 60 -2.45 DC Current Gain hFE Input On Voltage Output Voltage (equivalent to VCE(SAT) or VO(on)) Input Current Base-Emitter Turn-on Voltage Base-Emitter Saturation Voltage Input Resistor (Base), +/- 30% Pull-up Resistor (Base to Vcc supply), +/- 30% Resistor Ratio (Input Resistor/Pullup resistor), +/ -20% SMALL SIGNAL CHARACTERISTICS Transition Frequency (gain bandwidth product) Collector capacitance, (Ccbo-Output Capacitance) * Pulse Test: Pulse width, tp<300 S, Duty Cycle, d<=0.02. VI(ON) VOL Ii VBE(ON) VBE(SAT) R2 R1 R1/R2 fT CC 200 20 MHz pF DS30651 Rev. 7 - 2 3 of 10 www.diodes.com LMN200B01 NEW PRODUCT Electrical Characteristics: N-MOSFET with Gate Pull-Down Resistor (Q2) @ TA = 25C unless otherwise specified Characteristic OFF CHARACTERISTICS (Note 4) Drain-Source Breakdown Voltage, BVDSS Zero Gate Voltage Drain Current (Drain Leakage Current) Gate-Body Leakage Current, Forward Gate-Body Leakage Current, Reverse ON CHARACTERISTICS (Note 4) Gate Source Threshold Voltage (Control Supply Voltage) Static Drain-Source On-State Voltage On-State Drain Current Static Drain-Source On Resistance Forward Transconductance Gate Pull-Down Resistor, +/- 30% DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance Reverse Transfer Capacitance SWITCHING CHARACTERISTICS* Turn-On Delay Time Turn-Off Delay Time td(on) td(off) VSD IS ISM 0.88 20 40 ns ns VDD = 30V, VGS =10V, ID = 200mA, RG = 25, RL = 150 VGS = 0V, IS = 115 mA* Ciss Coss Crss 50 25 5 pF pF pF VDS = -25V, VGS = 0V, = 1MHz VGS(th) VDS(on) ID(on) RDS(on) gFS R3 1 500 80 80 1.86 0.08 0.15 1.55 1.4 240 350 37 2.2 1.5 3.75 3 2 V V mA mS K VDS = VGS, ID = 0.25mA VGS = 5V, ID = 50mA VGS = 10V, ID = 115mA VGS = 10V, VDS 2 VDS(ON) VGS = 5V, ID = 50mA VGS = 10V, ID = 500mA VDS 2 VDS(ON), ID = 115 mA VDS 2 VDS(ON), ID = 200 mA V(BR)DSS IDSS IGSSF IGSSR 60 1 0.95 -0.95 V A mA mA VGS = 0V, ID = 10A VGS =0V, VDS = 60V VGS = 20V, VDS = 0V VGS = -20V, VDS = 0V Symbol Min Typ Max Unit Test Condition SOURCE-DRAIN (BODY) DIODE CHARACTERISTICS AND MAXIMUM RATINGS Drain-Source Diode Forward On-Voltage Maximum Continuous Drain-Source Diode Forward Current (Reverse Drain Current) Maximum Pulsed Drain-Source Diode Forward Current * Pulse Test: Pulse width, tp<300 S, Duty Cycle, d<=0.02. Notes: 4. Short duration test pulse used to minimize self-heating effect. 1.5 115 800 V mA mA Typical Characteristics 350 300 PD, POWER DISSIPATION (mW) 250 200 150 100 50 0 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (C) Fig. 3, Max Power Dissipation vs Ambient Temperature DS30651 Rev. 7 - 2 4 of 10 www.diodes.com LMN200B01 Typical Pre-Biased PNP Transistor (Q1) Characteristics NEW PRODUCT 0.4 IC/IB = 10 0.6 IC/IB = 20 VCE(SAT), COLLECTOR VOLTAGE (V) VCE(SAT), COLLECTOR VOLTAGE (V) 0.5 0.3 TA = 125C TA = 150C 0.4 0.2 0.3 TA = 125C 0.2 TA = 150C TA = -55C TA = 25C 0.1 TA = 85C 0 0.01 TA = -55C 0.1 TA = 85C TA = 25C 0 0.01 0.1 1 0.1 1 IC, COLLECTOR CURRENT (A) Fig. 4 VCE(SAT) vs. IC 30 IC, COLLECTOR CURRENT (A) Fig. 5 VCE(SAT) vs. IC VBE(SAT), BASE EMITTER VOLTAGE (V) 25 TA = 25C TA = 150C TA = 125C VBE(ON), BASE EMITTER VOLTAGE (V) IC/IB = 10 TA = 85C 3 2.5 2 1.5 IC/IB = 10 VCE = 5V 20 15 TA = -55C 10 TA = -55C TA = 25C 1 0.5 TA = 85C TA = 125C 100 1000 5 TA = 150C 0 1 10 100 1000 0 1 10 IC, COLLECTOR CURRENT (mA) Fig. 6 VBE(SAT) vs. IC IC, COLLECTOR CURRENT (mA) Fig. 7 VBE(ON) vs. IC VCE = 5V 400 hFE, DC CURRENT GAIN TA = 125C 300 TA = 85C TA = 25C TA = 150C 200 100 TA = -55C 0 1 10 100 1000 IC, COLLECTOR CURRENT (mA) Fig. 8 hFE vs. IC DS30651 Rev. 7 - 2 5 of 10 www.diodes.com LMN200B01 Typical N-Channel MOSFET (Q2) Characteristics 1.8 TA = 25C 1.6 VGS = 10V 1.4 VDS = 10V 1.2 TA = -55C TA = 25C 1 TA = 125C TA = 85C 0.8 NEW PRODUCT ID, DRAIN CURRENT (A) 1.2 1.0 0.8 VGS = 5V ID, DRAIN CURRENT (A) 1.4 VGS = 8V VGS = 6V VGS = 4V 0.6 0.4 0.2 0 0 1 2 3 4 5 6 7 VGS = 3V 0.6 TA = 150C 0.4 0.2 0 0 1 2 3 4 5 VDS, DRAIN-SOURCE VOLTAGE (V) Fig. 9 Output Characteristics VGS, GATE-SOURCE VOLTAGE (V) Fig. 10 Transfer Characteristics 2.2 VGS(th), GATE THRESHOLD VOLTAGE (V) 2 VDS = 10V VDS = VGS ID = 0.25mA Pulsed 5 VGS = 5V Pulsed 4 TA = 125C TA = 150C 1.8 3 1.6 1.4 2 TA = 85C TA = 25C 1.2 1 TA = -55C 0 -75 -50 -25 0 25 50 75 100 125 150 0 0.001 TJ, JUNCTION TEMPERATURE (C) Fig. 11 Gate Threshold Voltage vs. Junction Temperature 0.1 0.01 ID, DRAIN CURRENT (A) Fig. 12 Static Drain-Source On-Resistance vs. Drain Current 1 4 VGS = 10V Pulsed 3 TA = 125C TA = 150C 7 6 5 4 TA = 25C Pulsed 2 TA = 85C 3 ID = 115mA TA = 25C 2 1 TA = -55C 1 ID = 50mA 0 0.001 0.01 0.1 1 0 0 2 4 6 8 10 12 14 16 18 20 VGS, GATE SOURCE VOLTAGE (V) Fig. 14 Static Drain-Source On-Resistance vs. Gate-Source Voltage ID, DRAIN CURRENT (A) Fig. 13 Static Drain-Source On-Resistance vs. Drain Current DS30651 Rev. 7 - 2 6 of 10 www.diodes.com LMN200B01 2.5 1 IS, REVERSE DRAIN CURRENT (A) VGS = 10V Pulsed NEW PRODUCT ID = 115mA TA = 125C TA = 25C 0.1 TA = -55C TA = 150C TA = 85C 2 ID = 50mA 1.5 0.01 1 VGS = 5V Pulsed 0.5 -75 -50 -25 0 25 50 75 100 125 150 0.001 0 0.5 1 1.5 Tj, JUNCTION TEMPERATURE (C) Fig. 15 Static Drain-Source On-State Resistance vs. Junction Temperature VSD, SOURCE-DRAIN VOLTAGE (V) Fig. 16 Reverse Drain Current vs. Source-Drain Voltage IS, REVERSE DRAIN CURRENT (A) VGS = 10V VGS = 5V TA = 25C =25y Pulsed C gFS, FORWARD TRANSCONDUCTANCE (mS) 1 900 800 700 600 500 400 300 200 100 0 0 0.2 0.4 0.6 0.8 ID, DRAIN CURRENT (A) Fig. 18 Forward Transconductance vs. Drain Current (VDS > ID RDS(ON)) TA = 150C TA = 125C TA = 25C TA = 85C TA = -55C 0.1 0.01 0.001 0 0.5 1 1.5 2 2.5 VSD, BODY DIODE FORWARD VOLTAGE (V) Fig. 17 Reverse Drain Current vs. Body Diode Forward Voltage DS30651 Rev. 7 - 2 7 of 10 www.diodes.com LMN200B01 (c) Diodes Incorporated Application Details NEW PRODUCT * PNP Transistor (DDTB142JU) and N-MOSFET (DSNM6047) with gate pull-down resistor integrated as one in LMN200B01 can be used as a discrete entity for general purpose applications or as an integrated circuit to function as a Load Switch. When it is used as the latter as shown in Fig 19, various input voltage sources can be used as long as it does not exceed the maximum ratings of the device. These devices are designed to deliver continuous output load current up to a maximum of 200 mA. The MOSFET Switch draws no current, hence loading of control circuit is prevented. Care must be taken for higher levels of dissipation while designing for higher load conditions. These devices provide high power and also consume less space. The product mainly helps in optimizing power usage, thereby conserving battery life in a controlled load system like portable battery powered applications. (Please see Fig. 20 for one example of a typical application circuit used in conjunction with voltage regulator as a part of a power management system) Vin DDTB142JU E Q1 B PNP C Vout R1 10K LOAD R2 470 DSNM6047 D Q2 S NMOS G Control R3 37K Fig. 19 Circuit Diagram Typical Application Circuit 5v Supply U1 U2 Vin U3 Load Switch Vin OUT1 1 6 Vout 5 4 Gnd Voltage Regulator Control Logic Circuit (PIC, Comparator etc) GND Point of Load IN OUT E_Q1 G_Q2 D_Q2 C_Q1 B_Q1 S_Q2 Control 2 3 LNM200B01 Diodes Inc. Fig. 20 DS30651 Rev. 7 - 2 8 of 10 www.diodes.com LMN200B01 Ordering Information (Note 5) Marking Code PM1 Packaging SOT-26 Shipping 3000/Tape & Reel NEW PRODUCT Device LMN200B01-7 Note: 5. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information PM1 PM1 = Product Type Marking Code, YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September Fig. 21 Date Code Key Year Code Month Code Jan 1 Feb 2 March 3 Apr 4 May 5 Jun 6 2006 T Jul 7 Aug 8 2007 U Sep 9 2008 V Oct O Nov N 2009 W Dec D DS30651 Rev. 7 - 2 YM 9 of 10 www.diodes.com LMN200B01 Mechanical Details NEW PRODUCT A SOT-26 Dim A BC Min 0.35 1.5 2.7 2.9 0.013 1 0.35 0.1 0 Max 0.5 1.7 3 3.1 0.1 1.3 0.55 0.2 8 Typ 0.38 1.6 2.8 0.95 0.55 3 0.05 1.1 0.4 0.15 - B C D H K M F H J K L M Fig. 22 J D F L All Dimensions in mm Suggested Pad Layout: (Based on IPC-SM-782) E E Figure 23 Dimensions Z G X Y C E SOT-26* 3.2 1.6 0.55 0.8 2.4 0.95 Z G C Y X Fig. 23 IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the expressed written approval of Diodes Incorporated. DS30651 Rev. 7 - 2 10 of 10 www.diodes.com LMN200B01 |
Price & Availability of LMN200B01 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |