![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PI74STX2G4245 2-Bit Level Shifting Buffer/Transceiver with Configurable Dual Supply Voltage Features * Operation Voltage: 1.65V VCCA 3.6V 2.3V VCCB 5.5V VCCA VCCB * High Speed: tpd = 5ns typical into 30pF @ 3V VCC * Power down high-impedance inputs and outputs * High output drive: 12mA at 3V VCCA/VCCB 24mA at 5V VCCB * Industrial operation at -40C to +85C * Packaging (Pb-free & Green available): - 8-pin MSOP (U) - 12-pin TDFN (ZE) Description Pericom Semiconductor's PI74STX2G4245, a 2-bit noninverting buffer/transceiver, contains two separate supply rails:A port (VCCA), set to operate from 1.8V to 3.3V; B port (VCCB), set to operate from 2.5V to 5V. The A1 to B1 translation is configured as an unidirectional buffer; the translation between A2 and B2 is bidirectional and its direction is controlled by the DIR pin. The DIR pin is supplied by VCCB. Block Diagram DIR Pin Configuration (MSOP) (1.8V to 3.3V)VCCA 4 1 2 3 4 8 7 6 5 VCCB (2.5V to 5V) B1 B2 GND A2 3 6 A1 B2 A2 DIR A1 2 7 B1 Function Table Input DIR L H X DATA B2 A2 A1 Output A2 B2 B1 Pin Configuration (TDFN) NC (1.8V to 3.3V ) VCCA A1 A2 DIR NC 1 2 3 4 5 6 12 11 10 9 8 7 NC VCCB (2.5V to 5V) B1 B2 GND NC Pin Description Pin Name DIR A1 B1 A2, B2 VCCA, VCCB Description Direction Control Data Input Data Output Data Input/Output Power Supply 1 * NC = No Connect PS8729C 09/27/04 2-Bit Level Shifting Buffer/Transceiver with Configurable Dual Supply Voltage PI74STX2G4245 Maximum Ratings (Absolute maximum ratings over operating free-air temperature range from VCCB at 2.5V & VCCA at 1.2V, unless otherwise noted) Supply voltage range: VCCA.............................. -0.5V to +6V VCCB .............................. -0.5V to +6V Input Voltage Range, VI: Input A1(2) ................... -0.5V to +6V I/O A2(2,3) ........-0.5V to VCCA+0.5V I/O B2(2,3) ........ -0.5V to VCCB+0.5V Output Voltage Range, VO Output B1(2, 3) .. -0.5V to VCCB +0.5V DC Input Diode Current, IIK (VO <0) .......................... -50mA DC Output Diode Current, IOK (VO <0) ....................... -50mA DC Output Current, (IOUT) ........................................... 50mA DC VCC or GND Current (ICC/IGND).......................... 100mA Storage temperature range, TSTG .................... -65C to 150C Junction Lead Temperature (IOS) ....................................260C Power Dissipation: MSOP ........................................... 200mW Notes: 1. Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. The input negative voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. 3. This value is limited to 6V. Recommended Operating Conditions for A Port ( VCCA)(1) Parameter VCCA VIH VIL VIA VOA IOH Description Supply Voltage High-level input voltage Low-level input voltage Input Voltage Output Votage VCCA = 1.65 V to 1.95V High-level Output Current VCCA = 2.3V to 2.7V VCCA = 3V to 3.6V VCCA = 1.65V to 1.95V IOL Low-level Output Current VCCA = 2.3V to 2.7V VCCA = 3V to 3.6V t/V TA Input transition rise or fall rate Operation free-air temperature VCCA = 1.65V to 1.95V VCCA = 2.3V to 3.6V -40 VCCA = 1.65V to 1.95V VCCA = 2.3V to 3.6V VCCA = 1.65 to 1.95V VCCA = 2.3V to 3.6V 0 0 Test Conditions Min. 1.65 0.7 x VCCA 0.7 x VCCA 0.3 x VCCA 0.3 x VCCA VCCA VCCA -4 -8 -12 4 8 12 20 10 85 ns/V C mA V Max. 3.6 Units Note: 1. To ensure proper device operation, all unused inputs must be held at VCCA or GND. 2 PS8729C 09/27/04 2-Bit Level Shifting Buffer/Transceiver with Configurable Dual Supply Voltage PI74STX2G4245 Recommended Operating Conditions for B Port ( VCCB)(1) Paramaters VCCB VIH VIL VIB VOB IOH Description Supply Voltage High-level input voltage Low-level input voltage Input Voltage Output Votage VCCB = 2.3 V to 2.7V High-level Output Current VCCB = 3V to 3.6V VCCB = 4.5V to 5.5V VCCB = 2.3V to 2.7V IOL t/V TA Low-level Output Current Input transition rise or fall rate Operation free-air temperature VCCB = 3V to 3.6V VCCB = 4.5V to 5.5V VCCB = 2.3V to 5.5V -40 Data Inputs DIR pin Data Inputs DIR pin VCCB = 2.3V to 5.5V VCCB = 2.3V to 5.5V 0 0 Test Conditions Min. 2.3 0.7 x VCCB 0.3 x VCCB VCCB VCCB -8 -12 -24 8 12 24 10 85 m/V C mA V Max. 5.5 Units Notes: 1. To ensure proper device operation, all unused inputs must be held at VCCB or GND. 3 PS8729C 09/27/04 2-Bit Level Shifting Buffer/Transceiver with Configurable Dual Supply Voltage PI74STX2G4245 Electrical Characteristics (Over recommended operating free-air temperature range) Parameters VOHA (B to A) Test Conditions IOH = -100uA IOH = -4mA IOH = -8mA IOH = -12mA IOH = 100uA VOLA (B to A) IOH = 4mA IOH = 8mA IOH = 12mA IOH = -100uA VOHB (A to B) IOH = -8mA IOH = -12mA IOH = -24mA IOH = 100uA VOLB (A to B) II(3) IOFF ICCA ICCB CI CO CIO A1, DIR B1 A2, B2 IOH = 8mA IOH = 12mA IOH = 24mA VI = VCCA/VCCB or GND VI or VO = VCCB or GND VI or VO = VCCA or GND VI = VCCA or GND, IO =0 VI = VCCB or GND, IO =0 VI = VCCA or GND Vo = VCCB or GND VI or VO = VCCA/VCCB or GND 1.65V to 3.6V and VCCB VCCA 0V 0 to 3.6V 1.65V to 3.6V and VCCB VCCA 1.8V 1.8V 1.8V 1.65V VCCA 3.6V and VCCB VCCA VCCA(1) 1.65V 2.3V 3.0V 1.65V to 3.6V 1.65V 2.3V 3.0V 2.3V to 5.5V 2.3V 3.0V 4.5V 2.3V to 5.5V 2.3V 3.0V 4.5V 2.3V to 5.5V and VCCB VCCA 0 to 5.5V 0V 2.3 to 5.5V and VCCB VCCA 3.3V 3.3V 3.3V VCCB-0.1 1.8 2.4 3.8 2.3V VCCB 5.5V and VCCB VCCA VCCB(1) Min. VCCB-0.1 1.3 1.8 2.4 1.65V to 3.6V Typ.(2) Max. Units 0.1 0.24 0.3 0.4 V 0.1 0.3 0.4 0.55 5 10 10 10 10 4.5 4.5 6.0 pF A Notes: 1. When 1.65 VCCA 1.95V, VCCB can not be greater then 3.6V 2. All Typical values are at TA = 25C 3. For I/O ports, the paraneter II includes the output leackage current. 4 PS8729C 09/27/04 2-Bit Level Shifting Buffer/Transceiver with Configurable Dual Supply Voltage PI74STX2G4245 Switching Characteristics for VCCA = 1.8V 0.15V Parameter tPHL tPLH tPHL tPLH tSK(O) From (Input) A B To (Output) B A Min. 1.0 1.0 1.0 1.0 (Over recommended operating free-air temperature range, see figure 1) VCCB = 2.5V 0.2V Max. 8 8 7 7 1.5 VCCB = 3.3V 0.3V Min. 1.0 1.0 1.0 1.0 Max. 8 8 7 7 1 ns Units Switching Characteristics for VCCA = 2.5V 0.2V Parameter tPHL tPLH tPHL tPLH tSK(O) From (Input) A B To (Output) B A Min. 1.0 1.0 1.0 1.0 (Over recommended operating free-air temperature range, see figure 1) VCCB = 2.5V 0.2V Max. 7 7 6 6 1.5 VCCB = 3.3V 0.3V Min. 1.0 1.0 1.0 1.0 Max. 6.5 6.5 6 6 1 VCCB = 5V 0.5V Min. 1.0 1.0 1.0 1.0 Max. 6 6 5 5 1 ns Units Switching Characteristics for VCCA = 3.3V 0.3V Parameter tPHL tPLH tPHL tPLH tSK(O) From (Input) A B To (Output) B A (Over recommended operating free-air temperature range, see figure 1) VCCB = 3.3V 0.3V Min. 1.0 1.0 1.0 1.0 Max. 5 5 5 5 1 VCCB = 5V 0.5V Min. 1.0 1.0 1.0 1.0 Max. 5 5 5 5 1 ns Units 5 PS8729C 09/27/04 2-Bit Level Shifting Buffer/Transceiver with Configurable Dual Supply Voltage PI74STX2G4245 AC Loading and Waveforms VCCA/B 1.8 0.15V 2.5V 0.2V 3.0V to 3.6V 5V 0.5V VCCA/B Output CL 15pF 15pF 30pF 50pF RL 1K 500 500 500 tR = 3ns tf = 3ns 90% Input 90% 50% 10% tW VCC 50% 10% tPHL GND tPLH VOH 50% 50% VOL Input Output CL RL Figure 3. AC Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500ns Figure 1. AC Test Circuit VCC A Input Output Input = AC Waveform; tr = tf = 1.8ns; PRR = 10 MHz; Duty Cycle = 50% Figure 2. ICCD Test Circuit 6 PS8729C 09/27/04 2-Bit Level Shifting Buffer/Transceiver with Configurable Dual Supply Voltage PI74STX2G4245 Packaging Mechanical: 8-Pin MSOP (U) 15 Max. .003 .012 0.07 0.30 .003 .012 0.07 0.30 Gauge Plane .010 0.25 15 Max. .037 0.95 REF .016 .028 0.40 0.70 Detail A 0- 6 .112 2.85 .120 3.05 15 MAX Detail A .114 2.90 .122 3.10 15 MAX .114 2.90 .122 3.10 Packaging Mechanical: 12-pin TDFN (ZE) 2.50 REF. Pin #1 Corner 0.50 TYP. 0.20 REF. 7 PS8729C 09/27/04 2-Bit Level Shifting Buffer/Transceiver with Configurable Dual Supply Voltage PI74STX2G4245 Ordering Information Ordering Code PI74STX2G4245UX PI74STX2G4245UEX PI74STX2G4245ZEEX Package Code U U ZE Package Type 8-pin MSOP Pb-free & Green, 8-pin MSOP Pb-free & Green, 12-pin TDFN Package Top Marking DE DE DE Notes: 1. Thermal Characteristics can be found on the web at www.pericom.com/packaging/ 2. X = Tape and Reel 3. Number of Transistors = TBD Pericom Semiconductor Corporation * 1-800-435-2336 * www.pericom.com 8 PS8729C 09/27/04 |
Price & Availability of PI74STX2G4245
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |