View IHW20N120R2_602234.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IHW20N120R2
Soft Switching Series
Reverse Conducting IGBT with monolithic body diode
Features: * Powerful monolithic Body Diode with very low forward voltage * Body diode clamps negative voltages * Trench and Fieldstop technology for 1200 V applications offers : - very tight parameter distribution - high ruggedness, temperature stable behavior * NPT technology offers easy parallel switching capability due to positive temperature coefficient in VCE(sat) * Low EMI 1 * Qualified according to JEDEC for target applications * Pb-free lead plating; RoHS compliant * Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/ Applications: * Inductive Cooking * Soft Switching Applications Type IHW20N120R2 Maximum Ratings Parameter Collector-emitter voltage DC collector current TC = 25C TC = 100C Pulsed collector current, tp limited by Tjmax Turn off safe operating area (VCE 1200V, Tj 175C) Diode forward current TC = 25C TC = 100C Diode pulsed current, tp limited by Tjmax Diode surge non repetitive current, tp limited by Tjmax TC = 25C, tp = 10ms, sine halfwave TC = 25C, tp 2.5s, sine halfwave TC = 100C, tp 2.5s, sine halfwave Gate-emitter voltage Transient Gate-emitter voltage (tp < 5 ms) Power dissipation TC = 25C Operating junction temperature Storage temperature Soldering temperature, 1.6mm (0.063 in.) from case for 10s Ptot Tj Tstg IFpul s IFSM Symbol VCE IC Value 1200 40 20 60 60 40 20 30 50 130 120 20 25 330 -40...+175 -55...+175 260 W C V Unit V A VCE 1200V IC 20A VCE(sat),Tj=25C 1.55V Tj,max 175C Marking H20R1202 Package PG-TO-247-3-21
C
G
E
PG-TO-247-3-21
ICpul s IF
VGE
1
J-STD-020 and JESD-022 1 Rev. 1.2 May 06
Power Semiconductors
IHW20N120R2
Soft Switching Series
Thermal Resistance Parameter Characteristic IGBT thermal resistance, junction - case Diode thermal resistance, junction - case Thermal resistance, junction - ambient Electrical Characteristic, at Tj = 25 C, unless otherwise specified Parameter Static Characteristic Collector-emitter breakdown voltage Collector-emitter saturation voltage V ( B R ) C E S V G E = 0V , I C = 5 00 A VCE(sat) V G E = 15 V , I C = 20 A T j =2 5 C T j =1 2 5 C T j =1 7 5 C Diode forward voltage VF V G E = 0V , I F = 2 0 A T j =2 5 C T j =1 2 5 C T j =1 7 5 C Gate-emitter threshold voltage Zero gate voltage collector current VGE(th) ICES I C = 0. 5m A, VCE=VGE V C E = 12 0 0V, V G E = 0V T j =2 5 C T j =1 7 5 C Gate-emitter leakage current Transconductance Integrated gate resistor IGES gfs RGint V C E = 0V , V G E =2 0 V V C E = 20 V , I C = 20 A 14.5 none 5 2500 100 nA S 5.1 1.45 1.6 1.65 5.8 1.7 6.4 A 1.55 1.75 1.85 1.75 1200 V Symbol Conditions Value min. Typ. max. Unit RthJA 40 RthJCD 0.45 RthJC 0.45 K/W Symbol Conditions Max. Value Unit
Power Semiconductors
2
Rev. 1.2
May 06
IHW20N120R2
Soft Switching Series
Dynamic Characteristic Input capacitance Output capacitance Reverse transfer capacitance Gate charge Internal emitter inductance measured 5mm (0.197 in.) from case Ciss Coss Crss QGate LE V C E = 25 V , V G E = 0V , f= 1 MH z V C C = 96 0 V, I C =2 0 A V G E = 15 V 13 nH 1887 59 47 143 nC pF
Switching Characteristic, Inductive Load, at Tj=25 C Parameter IGBT Characteristic Turn-off delay time Fall time Turn-on energy Turn-off energy Total switching energy td(off) tf Eon Eoff Ets T j =2 5 C , V C C = 60 0 V, I C = 2 0 A V G E = 0 /1 5 V, R G = 15 , 2) L =1 8 0n H, 2) C = 3 9p F 359 53 1.2 1.2 mJ ns Symbol Conditions Value min. typ. Max. Unit
Switching Characteristic, Inductive Load, at Tj=175 C Parameter IGBT Characteristic Turn-off delay time Fall time Turn-on energy Turn-off energy Total switching energy td(off) tf Eon Eoff Ets T j =1 7 5 C V C C = 60 0 V, I C = 2 0 A, V G E = 0 / 15 V , R G = 1 5 , 2) L =1 8 0n H , 2) C =3 9 pF 427 99 2.0 2.0 mJ ns Symbol Conditions Value min. Typ. Max. Unit
2)
Leakage inductance L a nd Stray capacity C due to dynamic test circuit in Figure E. 3 Rev. 1.2 May 06
Power Semiconductors
IHW20N120R2
Soft Switching Series
tp=1s
60A
10s
IC, COLLECTOR CURRENT
IC, COLLECTOR CURRENT
TC=80C TC=110C
10A
20s 50s
40A
Ic
20A
1A
500s 5ms
0A 10Hz
DC
100Hz 1kHz 10kHz 100kHz
1V
10V
100V
1000V
f, SWITCHING FREQUENCY Figure 1. Collector current as a function of switching frequency for hard switching (turn-off) (Tj 175C, D = 0.5, VCE = 600V, VGE = 0/+15V, RG = 15)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 2. IGBT Safe operating area (D = 0, TC = 25C, Tj 175C;VGE=15V)
40A
300W 250W 200W 150W 100W 50W 0W 25C
IC, COLLECTOR CURRENT
50C 75C 100C 125C 150C
Ptot, DISSIPATED POWER
30A
20A
10A
0A 25C
50C
75C
100C 125C
150C
TC, CASE TEMPERATURE Figure 3. Power dissipation as a function of case temperature (Tj 175C)
TC, CASE TEMPERATURE Figure 4. DC Collector current as a function of case temperature (VGE 15V, Tj 175C)
Power Semiconductors
4
Rev. 1.2
May 06
IHW20N120R2
Soft Switching Series
50A
50A
IC, COLLECTOR CURRENT
40A
IC, COLLECTOR CURRENT
VGE=20V 15V 13V 11V 9V
VGE=20V 40A 15V 13V 30A 11V 9V 7V
30A
20A
7V
20A
10A
10A
0A 0V 1V 2V
0A 0V 1V 2V 3V
VCE, COLLECTOR-EMITTER VOLTAGE Figure 5. Typical output characteristic (Tj = 25C)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 6. Typical output characteristic (Tj = 175C)
VCE(sat), COLLECTOR-EMITT SATURATION VOLTAGE
IC=40A 2.5V
50A
IC, COLLECTOR CURRENT
40A
2.0V
IC=20A
30A
1.5V IC=10A 1.0V
20A TJ=175C 10A 25C
0.5V
0A 0V 2V 4V 6V 8V 10V
0.0V 0C 50C 100C 150C
VGE, GATE-EMITTER VOLTAGE Figure 7. Typical transfer characteristic (VCE=20V)
TJ, JUNCTION TEMPERATURE Figure 8. Typical collector-emitter saturation voltage as a function of junction temperature (VGE =15V)
Power Semiconductors
5
Rev. 1.2
May 06
IHW20N120R2
Soft Switching Series
1000ns
1000ns
td(off)
t, SWITCHING TIMES
100ns tf
t, SWITCHING TIMES
100ns
td(off)
tf
0A
10A
20A
30A
10
20
30
40
50
60
70
IC, COLLECTOR CURRENT Figure 9. Typical switching times as a function of collector current (inductive load, TJ=175C, VCE=600V, VGE=0/15V, RG=15, Dynamic test circuit in Figure E)
RG, GATE RESISTOR Figure 10. Typical switching times as a function of gate resistor (inductive load, TJ=175C, VCE=600V, VGE=0/15V, IC=20A, Dynamic test circuit in Figure E)
td(off)
VGE(th), GATE-EMITT TRSHOLD VOLTAGE
6V max. 5V typ. 4V
t, SWITCHING TIMES
100ns
tf
min.
3V
10ns 25C
50C
75C
100C
125C
150C
2V -50C
0C
50C
100C
TJ, JUNCTION TEMPERATURE Figure 11. Typical switching times as a function of junction temperature (inductive load, VCE=600V, VGE=0/15V, IC=20A, RG=29, Dynamic test circuit in Figure E)
TJ, JUNCTION TEMPERATURE Figure 12. Gate-emitter threshold voltage as a function of junction temperature (IC = 0.5mA)
Power Semiconductors
6
Rev. 1.2
May 06
IHW20N120R2
Soft Switching Series
Eoff
E, SWITCHING ENERGY LOSSES
3.0mJ Eoff
E, SWITCHING ENERGY LOSSES
2.0mJ
2.0mJ
1.0mJ
1.0mJ
0.0mJ 0A 10A 20A 30A
0.0mJ
20 30 40 50 60 70 80
IC, COLLECTOR CURRENT Figure 13. Typical turn-off energy as a function of collector current (inductive load, TJ=175C, VCE=600V, VGE=0/15V, RG=15, Dynamic test circuit in Figure E)
RG, GATE RESISTOR Figure 14. Typical turn-off energy as a function of gate resistor (inductive load, TJ=175C, VCE=600V, VGE=0/15V, IC=20A, Dynamic test circuit in Figure E)
2.0mJ
Eoff
E, SWITCHING ENERGY LOSSES
E, SWITCHING ENERGY LOSSES
75C 100C 125C 150C
1.5mJ
1.5mJ
Eoff
1.0mJ
1.0mJ
0.5mJ
0.5mJ
0.0mJ 25C
50C
0.0mJ 600V
700V
TJ, JUNCTION TEMPERATURE Figure 15. Typical turn-off energy as a function of junction temperature (inductive load, VCE=600V, VGE=0/15V, IC=20A, RG=15, Dynamic test circuit in Figure E)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 16. Typical turn-off energy as a function of collector emitter voltage (inductive load, TJ=175C, VGE=0/15V, IC=20A, RG=15, Dynamic test circuit in Figure E)
Power Semiconductors
7
Rev. 1.2
May 06
IHW20N120R2
Soft Switching Series
Ciss 1nF
VGE, GATE-EMITTER VOLTAGE
240V
c, CAPACITANCE
10V
960V
100pF Coss
5V
Crss
0V
0nC
50nC
100nC
150nC
10pF
0V
10V
20V
QGE, GATE CHARGE Figure 17. Typical gate charge (IC=20 A)
VCE, COLLECTOR-EMITTER VOLTAGE Figure 18. Typical capacitance as a function of collector-emitter voltage (VGE=0V, f = 1 MHz)
D=0.5
ZthJC, TRANSIENT THERMAL RESISTANCE
10 K/W
-1
0.2 0.1 0.05 0.02
R,(K/W) 0.0578 0.1699 0.1392 0.087
R1
ZthJC, TRANSIENT THERMAL RESISTANCE
D=0.5
10 K/W
-1
0.2 0.1 0.05 0.02 0.01
10 K/W
-2
0.01
, (s) 1.16*10-1 1.88*10-2 2.03*10-3 2.38*10-4
R2
R,(K/W) 0.0788 0.183 0.162 0.0505
R1
, (s) 1.04*10-1 1.52*10-2 9.51*10-4 4.95*10-5
R2
single pulse
C 1 = 1 /R 1 C 2 = 2 /R 2
C 1 = 1 /R 1
C 2 = 2 /R 2
10 K/W
-2
single pulse
10 K/W
-3
10s
100s
1ms
10ms
100ms
10s
100s
1ms
10ms
100ms
tP, PULSE WIDTH Figure 19. IGBT transient thermal resistance (D = tp / T)
tP, PULSE WIDTH Figure 20. Diode transient thermal impedance as a function of pulse width (D=tP/T)
Power Semiconductors
8
Rev. 1.2
May 06
IHW20N120R2
Soft Switching Series
35A 30A
2.0V IF=40A
VF, FORWARD VOLTAGE
IF, FORWARD CURRENT
25A 20A 15A 10A 5A 0A TJ=25C 175C
1.5V
20A 10A
1.0V
0.5V
0.0V
0.5V
1.0V
1.5V
2.0V
0.0V
0C
50C
100C
150C
VF, FORWARD VOLTAGE Figure 21. Typical diode forward current as a function of forward voltage
TJ, JUNCTION TEMPERATURE Figure 22. Typical diode forward voltage as a function of junction temperature
Power Semiconductors
9
Rev. 1.2
May 06
IHW20N120R2
Soft Switching Series
PG-TO247-3-21
Please refer to mounting instructions for assembly.
Power Semiconductors
10
Rev. 1.2
May 06
IHW20N120R2
Soft Switching Series
i,v diF /dt tr r =tS +tF Qr r =QS +QF IF tS QS tr r tF 10% Ir r m t VR
Ir r m
QF
dir r /dt 90% Ir r m
Figure C. Definition of diodes switching characteristics
1
Tj (t) p(t)
r1
r2
2
n
rn
r1
r2
rn
Figure A. Definition of switching times
TC
Figure D. Thermal equivalent circuit
Figure B. Definition of switching losses
Figure E. Dynamic test circuit Leakage inductance L a n d Stray capacity C
Power Semiconductors
11
Rev. 1.2
May 06
IHW20N120R2
Soft Switching Series
Edition 2006-01 Published by Infineon Technologies AG 81726 Munchen, Germany (c) Infineon Technologies AG 5/10/06. All Rights Reserved. Attention please! The information given in this data sheet shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
Power Semiconductors
12
Rev. 1.2
May 06

▲Up To Search▲

Price & Availability of IHW20N120R2

	To Download IHW20N120R2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .