![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
( DataSheet : www..com ) Tyco / Electronics Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866 PRODUCT: miniSMDM110/16 PolySwitch(R) PTC Devices Overcurrent Protection Device DOCUMENT: SCD 24369 PCN: 951349 REV LETTER: B REV DATE: MARCH 29, 2001 PAGE NO.: 1 OF 1 Specification Status: Released Maximum Electrical Rating Voltage: 16VDC Current: 40A Notes: 1. All terminations are gold plated. 2. Devices cannot be wave soldered. 3. Drawing not to scale. Marking: Manufacturer's Mark 110G Part Identification Lot Identification TABLE I. DIMENSIONS: A mm: in:* MIN 4.35 (0.172) MAX 4.75 (0.187) MIN 3.05 (0.120) B C D MAX MIN MAX MIN MAX 3.60 1.75 2.00 1.4 -(0.142) (0.069) (0.079) (0.055) -- *Rounded off approximation TABLE II. PERFORMANCE RATINGS: CURRENT LIMITS** TIME TO TRIP ** SECONDS AT 25C, 8.0A MAX 0.5 TRIPPEDRESISTANCE VALUES STATE POWER DISSIPATION** OHMS WATTS AT AT 25C 25C, 8.0V MIN MAX* MAX 0.060 0.180 0.8 AMPERES AMPERES AMPERES AT 0C AT 25C AT 60C HOLD TRIP HOLD TRIP HOLD TRIP 1.25 2.20 1.10 1.95 0.78 1.37 *Maximum resistance is measured 1 hour after reflow. ** Values specified were determined using PCB's with 0.030"X1.5 ounce copper trace. Reference Documents: Precedence: Effectivity: CAUTION: PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. www..com www..com |
Price & Availability of MINISMDM11016
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |