![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery FEATURES * Low forward volt drop * Fast switching * Soft recovery characteristic * High thermal cycling performance * Isolated mounting tab BY229F, BY229X series SYMBOL QUICK REFERENCE DATA VR = 200 V/ 400 V/ 600 V/800 V IF(AV) = 8 A IFSM 60 A trr 135 ns k 1 a 2 GENERAL DESCRIPTION Glass-passivated double diffused rectifier diodes featuring low forward voltage drop, fast reverse recovery and soft recovery characteristic. The devices are intended for use in TV receivers, monitors and switched mode power supplies. The BY229F series is supplied in the conventional leaded SOD100 package. The BY229X series is supplied in the conventional leaded SOD113 package. PINNING PIN 1 2 tab DESCRIPTION cathode anode isolated SOD100 case SOD113 case 1 2 1 2 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL VRSM VRRM VRWM VR IF(AV) PARAMETER Peak non-repetitive reverse voltage Peak repetitive reverse voltage Crest working reverse voltage Continuous reverse voltage Average forward current1 square wave; = 0.5; Ths 83 C sinusoidal; a = 1.57; Ths 90 C t = 25 s; = 0.5; Ths 83 C t = 10 ms t = 8.3 ms sinusoidal; Tj = 150 C prior to surge; with reapplied VRWM(max) t = 10 ms CONDITIONS BY229F- / BY229XMIN. 200 200 200 150 150 MAX. 400 400 400 300 300 8 7 11 16 60 66 600 600 600 500 500 800 800 800 600 600 UNIT V V V V A A A A A A IF(RMS) IFRM IFSM RMS forward current Peak repetitive forward current Peak non-repetitive forward current I2t Tstg Tj I2t for fusing Storage temperature Operating junction temperature -40 - 18 150 150 A2s C C 1. Neglecting switching and reverse current losses. September 1998 1 Rev 1.200 Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery ISOLATION LIMITING VALUE & CHARACTERISTIC Ths = 25 C unless otherwise specified SYMBOL PARAMETER Visol Peak isolation voltage from both terminals to external heatsink CONDITIONS BY229F, BY229X series MIN. - TYP. MAX. UNIT 1500 V SOD100 package; R.H. 65%; clean and dustfree Visol R.M.S. isolation voltage from SOD113 package; f = 50-60 Hz; both terminals to external sinusoidal waveform; R.H. 65%; clean heatsink and dustfree Capacitance from pin 1 to external heatsink f = 1 MHz - - 2500 V Cisol - 10 - pF THERMAL RESISTANCES SYMBOL Rth j-hs Rth j-a PARAMETER Thermal resistance junction to heatsink Thermal resistance junction to ambient CONDITIONS with heatsink compound without heatsink compound in free air. MIN. TYP. 55 MAX. 4.8 7.2 UNIT K/W K/W K/W STATIC CHARACTERISTICS Tj = 25 C unless otherwise stated SYMBOL VF IR PARAMETER Forward voltage Reverse current CONDITIONS IF = 20 A VR = VRWM; Tj = 125 C MIN. TYP. 1.5 0.1 MAX. 1.85 0.4 UNIT V mA DYNAMIC CHARACTERISTICS Tj = 25 C unless otherwise stated SYMBOL trr Qs dIR/dt PARAMETER Reverse recovery time Reverse recovery charge Maximum slope of the reverse recovery current CONDITIONS IF = 1 A; VR > 30 V; -dIF/dt = 50 A/s IF = 2 A; VR > 30 V; -dIF/dt = 20 A/s IF = 2 A; -dIF/dt = 20 A/s MIN. TYP. 100 0.5 50 MAX. 135 0.7 60 UNIT ns C A/s September 1998 2 Rev 1.200 Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery BY229F, BY229X series I dI F dt F 80 70 IFS(RMS) / A BY229 IFSM trr time 60 50 40 30 Qs 25% 100% 20 10 I R I rrm 0 1ms 10ms 0.1s tp / s 1s 10s Fig.1. Definition of trr, Qs and Irrm Fig.4. Maximum non-repetitive rms forward current. IF = f(tp); sinusoidal current waveform; Tj = 150C prior to surge with reapplied VRWM. IF / A Tj = 150 C Tj = 25 C BY229F 20 PF / W Vo = 1.25 V Rs = 0.03 Ohms BY329 Ths(max) / C 54 D = 1.0 78 30 15 0.5 0.2 0.1 I tp D= tp T t 20 10 102 10 5 T 126 typ max 0 0 2 4 6 IF(AV) / A 8 10 150 12 0 0 0.5 1 VF / V 1.5 2 Fig.2. Maximum forward dissipation, PF = f(IF(AV)); square wave current waveform; parameter D = duty cycle = tp/T. BY329 Ths(max) / C a = 1.57 1.9 10 4 5 126 2.2 2.8 102 Fig.5. Typical and maximum forward characteristic; IF = f(VF); parameter Tj 15 PF / W Vo = 1.25 V Rs = 0.03 Ohms 78 10 Qs / uC Tj = 150 C Tj = 25 C BY329 IF = 10 A 10 A 2A 1 1A 2A 1A 0 0 2 4 IF(AV) / A 6 150 8 0.1 1 10 -dIF/dt (A/us) 100 Fig.3. Maximum forward dissipation, PF = f(IF(AV)); sinusoidal current waveform; parameter a = form factor = IF(RMS)/IF(AV). Fig.6. Maximum Qs at Tj = 25C and 150C September 1998 3 Rev 1.200 Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery BY229F, BY229X series 1000 trr / ns BY329 IF = 10 A 10A 1A 1A 10 Transient thermal impedance, Zth j-hs (K/W) 1 100 0.1 0.01 P D tp D= Tj = 150 C Tj = 25 C 10 1 10 -dIF/dt (A/us) 100 0.001 1us T tp T t 10us 100us 1ms 10ms 100ms 1s pulse width, tp (s) BY229F 10s Fig.7. Maximum trr measured to 25% of Irrm; Tj = 25C and 150C Fig.9. Transient thermal impedance Zth = f(tp) 100 Cd / pF BY329 10 1 1 10 VR / V 100 1000 Fig.8. Typical junction capacitance Cd at f = 1 MHz; Tj = 25C September 1998 4 Rev 1.200 Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery MECHANICAL DATA Dimensions in mm Net Mass: 2 g BY229F, BY229X series 10.2 max 5.7 max 3.2 3.0 0.9 0.5 4.4 max 2.9 max 4.4 4.0 7.9 7.5 17 max seating plane 3.5 max not tinned 4.4 13.5 min k 0.4 M a 0.9 0.7 0.55 max 1.3 5.08 top view Fig.10. SOD100; The seating plane is electrically isolated from all terminals. Notes 1. Refer to mounting instructions for F-pack envelopes. 2. Epoxy meets UL94 V0 at 1/8". September 1998 5 Rev 1.200 Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery MECHANICAL DATA Dimensions in mm Net Mass: 2 g 3.2 3.0 10.3 max BY229F, BY229X series 4.6 max 2.9 max Recesses (2x) 2.5 0.8 max. depth 2.8 6.4 15.8 19 max. max. seating plane 15.8 max 3 max. not tinned 3 2.5 13.5 min. 1 0.4 M 2 1.0 (2x) 0.6 2.54 5.08 0.5 2.5 0.9 0.7 Fig.11. SOD113; The seating plane is electrically isolated from all terminals. Notes 1. Refer to mounting instructions for F-pack envelopes. 2. Epoxy meets UL94 V0 at 1/8". September 1998 6 Rev 1.200 Philips Semiconductors Product specification Rectifier diodes fast, soft-recovery DEFINITIONS Data sheet status Objective specification Product specification Limiting values BY229F, BY229X series This data sheet contains target or goal specifications for product development. This data sheet contains final product specifications. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. (c) Philips Electronics N.V. 1998 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. September 1998 7 Rev 1.200 |
Price & Availability of BY229XSERIES
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |