 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| a GENERAL DESCRIPTION Clock Driver AD246 AD246 SPECIFICATIONS (Typical @ 25C and VS = 15 V, unless otherwise noted.) The AD246 is a compact, inexpensive clock driver that can be used to obtain the required clock from a single 15 V supply. The circuit shown in Figure 1 (essentially an AD246) can operate at least 32 AD204s at the rated minimum supply voltage of 14.25 V and one additional isolator can be operated for each 40 mV increase in supply voltage up to 15 V. A supply bypass capacitor is included in the AD246, but if many AD204s are operated from a single AD246, an external bypass connector should be used with a value of at least 1 mF for every five isolators used. Place the capacitor as close as possible to the clock driver. 180pF 1 2 3 49.9k 12 9 8 7 4 3 14 C RC R CD 4947B Q 10 2 4 6 5 6 TELEDYNE TSC426 15V IN914 7 5 IN914 CLKOUT +1 F 35V CLK AND PWR COM Model OUTPUT* Frequency Voltage Fan Out POWER SUPPLY REQUIREMENTS Input Voltage Supply Current Unloaded Each AD204 Adds 1 mA Load on AD204 +VISO or -VISO Adds AD246JY AD246JN 25 kHz Nominal 25 kHz Nominal 15 V p-p Nominal 15 V p-p Nominal 32 max 32 max 15 V 5% 35 mA 2.2 mA 15 V 5% 35 mA 2.2 mA 0.7 mA 0.7 mA *The high current drive will not support a short to ground. Specifications are subject to change without notice. Figure 1. Clock Driver AD246 Pin Designations Pin (Y) 1 2 12 13 OUTLINE DIMENSIONS AD246JY Package Dimensions shown in inches and (millimeters) 8.40 (0.330) MAX 25.30 (0.995) MAX Pin (N) 12 1 14 24 Function 15 V Power In Clock Output Common Common AD246JN Package Dimensions shown in inches and (millimeters) 36.70 (1.445) MAX AD246JN FRONT VIEW 8.90 (0.350) MAX 0.51 (0.020) 0.38 (0.015) AD246JY FRONT VIEW 15.90 (0.625) MAX SIDE VIEW 2.50 (0.100) MIN 0.38 (0.015) 0.25 (0.010) 3.70 (0.145) 0.51 (0.020) 0.25 (0.010) 27.90 (1.100) 1 12 BOTTOM VIEW 2.50 (0.100) MIN 5.00 (0.197) 2.90 (0.115) CL 1.30 (0.050) NOM 14.00 (0.550) 2.90 (0.115) 0.38 (0.015) 0.25 (0.010) 13 2.50 (0.100) NOM 12.70 (0. 500) 17.80 (0.700) 14 1 BOTTOM VIEW 2.50 (0.100) 12 24 2 25.40 (1.000) CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN REV. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 www.analog.com Fax: 781/326-8703 (c) Analog Devices, Inc., 2002 -2- C02934-0-10/02(0) PRINTED IN U.S.A. |
Price & Availability of AD246
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |