|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
x Variable Duty Ratio: 55%/75% x CMOS Low Power Consumption x Operating Voltage: 0.9V~10.0V x Output Voltage Range: 2.0V~7.0V x Output Voltage Accuracy: 2.5% s Applications q Cellular phones, pagers q Palmtops q Cameras, video recorders q Portable equipment s General Description The XC6383 Series is a group of PFM controlled step-up DC/DC converters. Unlike conventional PFMs, the XC6383 automatically switches duty ratio (55%/75%) when it senses changes in load and can support both large and small currents. The XC6383 series employs CMOS process and laser trimming technologies so as to attain low power and high accuracy. Max. oscillator frequency is trimmed to 100kHz (accuracy: 15%). Every built-in switching transistor type enables a step-up circuit to be configured using only three external components ; a coil, a diode, and a capacitor. External transistor versions are available to accommodate high output current applications. Both built-in and external transistor types include 5-pin and 3-pin packages, which are provided with either a CE (chip enable) function that reduces power comsumption during shut-down mode, or a VDD pin function (separated power and voltage detect pins). SOT-23, SOT-25, and SOT-89-5 super mini-mold packages. s Features Operating (start-up) voltage range: 0.9V~10V Output voltage range: 2.0V~7.0V in 0.1V increments Highly accurate: Set-up voltage 2.5% Maximum oscillator frequency: 100kHz (15%) Variable Duty Ratio: 55%/75% (5%) Both switching transistor built-in and external types are available Five-lead packaged units offer either Chip Enable or independent VOUT pin option. Small package: SOT-23, 25 mini-mold (3-pin, 5-pin) SOT-89, 89-5 mini-power mold (3-pin, 5-pin) e s Selection Guide PART TYPE XC6383A DUTY RATIO Switchable PACKAGE SOT-23, SOT-89-3 SOT-23, SOT-89-3 SOT-25, SOT-89-5 SOT-25, SOT-89-5 SOT-25, SOT-89-5 SOT-25, SOT-89-5 SWITCHING RELATED Built-in Transistor "Lx" lead External Transistor "EXT" lead Built-in Transistor "Lx" lead External Transistor "EXT" lead Built-in Transistor "Lx" lead External Transistor "EXT" lead Chip Enable(CE) ADDITIONAL FUNCTION FEATURES * Automatic duty ratio switch. * Low ripple and highly efficient from low current to high current. * Automatic duty ratio switch. * Adding an external transistor XC6383B Switchable can improve the output capability by up to several hundred mA. XC6383C Switchable (CE) function added version to the XC6383A. * Stand-by current: 0.5A max. (CE) function added version to the XC6383B. * Stand-by current: 0.5A max. * Stand-by * Stand-by XC6383D Switchable Chip Enable(CE) XC6383E Switchable * Independent power supply and set-up voltage Separated "VDD" and "VOUT" leads sensing leads allow designing of PFM controllers. * Independent power supply and set-up voltage Separated "VDD" and "VOUT" leads sensing leads allow designing of PFM controllers. XC6383F Switchable s Block Diagram XC6383A~XC6383D (VDD is internally connected to the VOUT pin.) VDD LX Buffer VLx limiter Vref VOUT 2step PFM Control OSC 100/180kHz VSS e EXT ~5mV Chip Enable CE Note: Built-in Tr. types use the Lx pin, external Tr types use the EXT pin. The CE pin is only used with the XC6381C and XC6381D. XC6383E and XC6383F VDD VDD LX Buffer VLx limiter Vref VOUT 2step PFM Control OSC 100/180kHz VSS ~5mV EXT Note: The VDD pin is only used with the XC6383E and XC6383F. Built-in Tr types use the Lx pin, external Tr types use the EXT pin. s Absolute Maximum Ratings PARAMETER VOUT Input Voltage Lx pin Voltage Lx pin Current EXT pin Voltage EXT pin Current CE Input Voltage VDD Input Voltage Continuous Total Power Dissipation SOT-23 SOT-89 Pd Topr Tstg SYMBOL VOUT VLX ILX VEXT IEXT VCE VDD RATINGS 12 12 400 VSS-0.3 ~ VOUT+0.3 50 12 12 150 500 -30 ~ +80 -40 ~ +125 Ta=25: UNITS V V mA V mA V V mW : : Operating Ambient Temperature Storage Temperature s Pin Configuration 5 3 5 4 4 1 SOT-23 (TOP VIEW) 2 1 2 3 1 2 SOT-89 (TOP VIEW) 3 1 2 SOT-89-5 (TOP VIEW) 3 SOT-25 (TOP VIEW) e s Pin Assignment (XC6383A, XC6383B) PIN NUMBER XC6383A SOT-23 1 3 2 -SOT-89-3 1 2 3 -XC6383B SOT-23 1 3 -2 SOT-89-3 1 2 -3 VSS VOUT Lx EXT Ground Output voltage monitor, IC internal power supply Switch External switch transistor drive PIN NAME FUNCTION (XC6383C, XC6383D) PIN NUMBER XC6383C SOT-25 4 2 5 -1 3 SOT-89-5 5 2 4 -3 1 XC6383D SOT-25 4 2 -5 1 3 SOT-89-5 5 2 -4 3 1 VSS VOUT Lx EXT CE NC Ground Output voltage monitor, IC internal power supply Switch External switch transistor drive Chip enable No Connection PIN NAME FUNCTION (XC6383E, XC6383F) PIN NUMBER XC6383E SOT-25 4 2 5 -1 3 SOT-89-5 5 2 4 -3 1 XC6383F SOT-25 4 2 -5 1 3 SOT-89-5 5 2 -4 3 1 VSS VDD Lx EXT VOUT NC Ground IC internal power supply Switch External switch transistor drive Output voltage monitor No Connection PIN NAME FUNCTION s Electrical Characteristics XC6383A201MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage No-Load Input Current VOUT=2.0V SYMBOL VOUT VIN VST VHLD IIN IDD1 IDD2 RSWON ILXL DTY1 DTY2 MAX FOSC1 MAX FOSC2 VLxLMT EFFI IOUT=1mA IOUT=1mA IOUT=0mA(Note1) VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VLX=0.4V. No external components. VOUT=VLX=0.4V. Same as IDD1. Measuring of LX waveform. IOUT=1mA. Measuring of Lx on-time Same as IDD1. 75% duty. Same as IDD1. 55% duty. Same as IDD1. FOSC>MAXFOSC1 2 L, SD, CL etc. connected 70 50 85 153 0.7 70 75 55 100 180 0.70 4.3 13.6 1.9 9.1 8.6 27.3 3.9 13.7 1.0 80 60 115 207 1.1 CONDITIONS L, SD, CL etc. connected MIN 1.950 10 0.80 0.90 TYP 2.000 MAX 2.050 Ta=25: UNITS V V V V A A A A % % kHz kHz V % e Supply Current 1(Note2) Supply Current 2 LX Switch-On Resistance LX Leakage Current Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 LX Limit Voltage Efficiency Measuring conditions: Unless otherwise specified, VIN=VOUT 0.6, IOUT=10mA. See Typical Application Circuits, Fig.1. Note: 1. The Schottky diode (SD) must be type MA735, with reverse current (IR) < 1.0A at reverse voltage (VR)=10.0V 2. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". XC6383A301MR PARAMETER Output Voltage VOUT=3.0V SYMBOL VOUT VIN VST VHLD IIN IDD1 IDD2 RSWON ILXL DTY1 DTY2 MAX FOSC1 MAX FOSC2 VLxLMT EFFI IOUT=1mA IOUT=1mA IOUT=0mA(Note1) VIN=VOUT 0.95 VIN=VOUT+0.5 Same as IDD1. VLX=0.4V. No external components.VOUT=VLx=10V. Same as IDD1. Measuring of LXg waveform. IOUT=1mA. Measuring of Lx on-time Same as IDD1. 75% duty Same as IDD1. 55% duty Same as IDD. FOSC>MAXFOSC1 2 L, SD, CL etc. connected 70 50 85 153 0.7 80 75 55 100 180 0.70 4.6 19.7 2.1 5.2 9.3 39.4 4.2 7.9 1.0 80 60 115 207 1.1 CONDITIONS L, SD, CL etc. connected MIN 2.925 10 0.80 0.90 TYP 3.000 MAX 3.075 Ta=25: UNITS V V V V A A A A % % kHz kHz V % Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage No-Load Input Current Supply Current 1(Note2) Supply Current 2 LX Switch-On Resistance LX Leakage Current Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 LX Limit Voltage Efficiency Measuring conditions: Unless otherwise specified, VIN=VOUT 0.6, IOUT=30mA. See Typical Application Circuits, Fig.1. Note: 1. The Schottky diode (SD) must be type MA735, with reverse current (IR) < 1.0A at reverse voltage (VR)=10.0V 2. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". s Electrical Characteristics XC6383A501MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage No-Load Input Current Supply Current 1(Note2) Supply Current 2 LX Switch-On Resistance LX Leakage Current Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 LX Limit Voltage Efficiency VOUT=5.0V SYMBOL VOUT VIN VST VHLD IIN IDD1 IDD2 RSWON ILXL DTY1 DTY2 MAX FOSC1 MAX FOSC2 VLxLMT EFFI IOUT=1mA IOUT=1mA IOUT=0mA(Note1) VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VLX=0.4V. No external components. VOUT=VLX=10V. Same as IDD1. Measuring of LX waveform. IOUT=1mA. Measuring of Lx on-time Same as IDD1. 75% duty. Same as IDD1. 55% duty. Same as IDD1. FOSC>MAXFOSC1 2 L, SD, CL etc. connected 70 50 85 153 0.7 85 75 55 100 180 0.70 5.3 31.7 2.4 2.8 10.6 63.4 4.8 4.3 1.0 80 60 115 207 1.1 CONDITIONS L, SD, CL etc. connected MIN 4.875 10 0.80 0.90 TYP 5.000 MAX 5.125 Ta=25: UNITS V V V V A A A A % % kHz kHz V % e Measuring conditions: Unless otherwise specified, VIN=VOUT 0.6, IOUT=50mA. See Typical Application Circuits, Fig.1. Note: 1. The Schottky diode (SD) must be type MA735, with reverse current (IR) < 1.0A at reverse voltage (VR)=10.0V 2. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". XC6383B201MR PARAMETER Output Voltage VOUT=2.0V SYMBOL VOUT VIN VST VHLD IDD1 IDD2 REXTH REXTL DTY1 IOUT=1mA IOUT=1mA VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VEXT =VOUT-0.4V. Same as IDD1. VEXT=0.4V. Same as IDD1. Measuring of EXT waveform. IOUT=1mA. Measuring of EXT on-time. Same as IDD1. 75% duty Same as IDD1. 55% duty L, SD, CL, Tr., etc. connected 70 0.70 13.6 1.9 140 140 75 27.3 3.9 210 210 80 CONDITIONS L, SD, CL, Tr., etc. connected MIN 1.950 10 0.80 0.90 TYP 2.000 MAX 2.050 Ta=25: UNITS V V V V A A % Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage Supply Current 1(Note 1) Supply Current 2 EXT "High" On Resistance EXT "Low" On Resistance Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Efficiency DTY2 MAX FOSC1 MAX FOSC2 EFFI 50 85 153 55 100 180 70 60 115 207 % kHz kHz % Measuring conditions: Unless otherwise specified, VIN=VOUT 0.6, IOUT=10mA. See Typical Application Circuits, Fig.2. Note: 1. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. s Electrical Characteristics XC6383B301MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage Supply Current 1(Note 1) VOUT=3.0V SYMBOL VOUT VIN VST VHLD IDD1 IDD2 REXTH REXTL DTY1 IOUT=1mA IOUT=1mA VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VEXT =VOUT-0.4V. Same as IDD1. VEXT=0.4V. Same as IDD1. Measuring of EXT waveform. IOUT=1mA. Measuring of EXT on-time. Same as IDD1. 75% duty. Same as IDD1. 55% duty. L, SD, CL, Tr., etc. connected 70 0.70 19.7 2.1 76 76 75 39.4 4.2 114 114 80 CONDITIONS L, SD, CL, Tr., etc. connected MIN 2.925 10 0.80 0.90 TYP 3.000 MAX 3.075 Ta=25: UNITS V V V V A A % e Supply Current 2 EXT "High" On Resistance EXT "Low" On Resistance Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Efficiency DTY2 MAX FOSC1 MAX FOSC2 EFFI 50 85 153 55 100 180 80 60 115 207 % kHz kHz % Measuring conditions: Unless otherwise specified, VIN=VOUT 0.6, IOUT=30mA. See Typical Application Circuits, Fig.2. Note: 1. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. XC6383B501MR PARAMETER Output Voltage VOUT=5.0V SYMBOL VOUT VIN VST VHLD IDD1 IDD2 REXTH REXTL DTY1 IOUT=1mA IOUT=1mA VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VEXT =VOUT-0.4V. Same as IDD1. VEXT=0.4V. Same as IDD1. Measuring of EXT waveform. IOUT=1mA. Measuring of EXT on-time. Same as IDD1. 75% duty. Same as IDD1. 55% duty. L, SD, CL, Tr., etc. connected 70 0.70 31.7 2.4 50 50 75 63.4 4.8 75 75 80 CONDITIONS L, SD, CL, Tr., etc. connected MIN 4.875 10 0.80 0.90 TYP 5.000 MAX 5.125 Ta=25: UNITS V V V V A A % Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage Supply Current 1(Note 1) Supply Current 2 EXT "High" On Resistance EXT "Low" On Resistance Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Efficiency DTY2 MAX FOSC1 MAX FOSC2 EFFI 55 85 153 55 100 180 85 60 115 207 % kHz kHz % Measuring conditions: Unless otherwise specified, VIN=VOUT 0.6, IOUT=50mA. See Typical Application Circuits, Fig.2. Note: 1. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. s Electrical Characteristics XC6383C201MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage No-Load Input Current Supply Current 1(Note2) Supply Current 2 LX Switch-On Resistance LX Leakage Current Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Stand-by Current CE "High" Voltage VOUT=2.0V SYMBOL VOUT VIN VST VHLD IIN IDD1 IDD2 RSWON ILxL DTY1 DTY2 MAX FOSC1 MAX FOSC2 ISTB VCEH IOUT=1mA IOUT=1mA IOUT=0mA(Note1) VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VLX=0.4V. No external components. VOUT=VLX=10V. Same as IDD1. Measuring of LX waveform. IOUT=1mA. Measuring of LX on-time. Same as IDD1. 75% duty. Same as IDD1. 55% duty. Same as IDD1. Same as IDD1. Existence of LX Oscillation. Same as IDD1. Disappearance of LX Oscillation. Same as IDD1. VCE=VOUT 0.95 Same as IDD1.VCE=0V. Same as IDD1. FOSC>MAXFOSC1 2 L, SD, CL etc. connected 0.7 70 0.75 70 50 85 153 75 55 100 180 0.70 4.3 13.6 1.9 9.1 8.6 27.3 3.9 13.7 1.0 80 60 115 207 0.5 CONDITIONS L, SD, CL etc. connected MIN 1.950 10 0.80 0.90 TYP 2.000 MAX 2.050 Ta=25: UNITS V V V V A A A A % % kHz kHz A V e CE "Low" Voltage CE "High" Current CE "Low" Current LX Limit Voltage Efficiency VCEL ICEH ICEL VLxLMT EFFI 0.20 0.25 -0.25 1.1 V A A V % Measuring conditions: Unless otherwise specified, connect CE to VOUT, VIN=VOUT 0.6, IOUT=10mA. See Typical Application Circuits, Fig.3. Note: 1. The Schottky diode (SD) must be type MA735, with reverse current (IR) < 1.0A at reverse voltage (VR)=10.0V 2. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". s Electrical Characteristics XC6383C301MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage No-Load Input Current VOUT=3.0V SYMBOL VOUT VIN VST VHLD IIN IDD1 IDD2 RSWON ILxL DTY1 DTY2 MAX FOSC1 MAX FOSC2 ISTB VCEH IOUT=1mA IOUT=1mA IOUT=0mA(Note1) VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VLX=0.4V. No external components. VOUT=VLX=10V. Same as IDD1. Measuring of LX waveform. IOUT=1mA. Measuring of LX on-time. Same as IDD1. 75% duty Same as IDD1. 55% duty Same as IDD1. Same as IDD1. Existence of LX Oscillation. Same as IDD1. Disappearance of LX Oscillation. Same as IDD1. VCE=VOUT 0.95. Same as IDD1. VCE=0V. Same as IDD1. FOSC>MAXFOSC1 2 L, SD, CL etc. connected 0.7 80 0.75 70 50 85 153 75 55 100 180 0.70 4.6 19.7 2.1 5.2 9.3 39.4 4.2 7.9 1.0 80 60 115 207 0.5 CONDITIONS L, SD, CL etc. connected MIN 2.925 10 0.80 0.90 TYP 3.000 MAX 3.075 Ta=25: UNITS V V V V A A A A % % kHz kHz A V e Supply Current 1(Note2) Supply Current 2 LX Switch-On Resistance LX Leakage Current Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Stand-by Current CE "High" Voltage CE "Low" Voltage CE "High" Current CE "Low" Current LX Limit Voltage Efficiency VCEL ICEH ICEL VLxLMT EFFI 0.20 0.25 -0.25 1.1 V A A V % Measuring conditions: Unless otherwise specified, connect CE to VOUT, VIN=VOUT 0.6, IOUT=30mA. See Typical Application Circuits, Fig.3. Note: 1. The Schottky diode (SD) must be type MA735, with reverse current (IR) < 1.0A at reverse voltage (VR)=10.0V 2. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". s Electrical Characteristics XC6383C501MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage No-Load Input Current Supply Current 1(Note2) Supply Current 2 LX Switch-On Resistance LX Leakage Current Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Stand-by Current CE "High" Voltage VOUT=5.0V SYMBOL VOUT VIN VST VHLD IIN IDD1 IDD2 RSWON ILxL DTY1 DTY2 MAX FOSC1 MAX FOSC2 ISTB VCEH IOUT=1mA IOUT=1mA IOUT=0mA(Note1) VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VLX=0.4V. No external components. VOUT=VLX=10V. Same as IDD1. Measuring of Lx waveform. IOUT=1mA. Measuring of Lx on-time. Same as IDD1. 75% duty. Same as IDD1. 55% duty. Same as IDD1. Same as IDD1. Existence of LX Oscillation. Same as IDD1. Disappearance of LX Oscillation. Same as IDD1. VCE=VOUT 0.95. Same as IDD1.VCE=0V. Same as IDD1. FOSC>MAXFOSC1 2 L, SD, CL etc. connected 0.7 85 0.75 70 50 85 153 75 55 100 180 0.70 5.3 31.7 2.4 2.8 10.6 63.4 4.8 4.3 1.0 80 60 115 207 0.5 CONDITIONS L, SD, CL etc. connected MIN 4.875 10 0.80 0.90 TYP 5.000 MAX 5.125 Ta=25: UNITS V V V V A A A A % % kHz kHz A V e CE "Low" Voltage CE "High" Current CE "Low" Current LX Limit Voltage Efficiency VCEL ICEH ICEL VLxLMT EFFI 0.20 0.25 -0.25 1.1 V A A V % Measuring conditions: Unless otherwise specified, connect CE to VOUT, VIN=VOUT 0.6, IOUT=50mA. See Typical Application Circuits, Fig.3. Note: 1. The Schottky diode (SD) must be type MA735, with reverse current (IR) < 1.0A at reverse voltage (VR)=10.0V 2. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". s Electrical Characteristics XC6383D201MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage Supply Current 1(Note1) Supply Current 2 VOUT=2.0V SYMBOL VOUT VIN VST VHLD IDD1 IDD2 REXTH REXTL DTY1 DTY2 MAX FOSC1 MAX FOSC2 ISTB VCEH VCEL ICEH ICEL EFFI CONDITIONS L, SD, CL,Tr., etc. connected IOUT=1mA IOUT=1mA VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VEXT=VOUT-0.4V. Same as IDD1. VEXT=4.0V. Same as IDD1. Measuring of EXT waveform. IOUT=1mA. Measuring of EXT on-time Same as IDD1. 75% duty. Same as IDD1. 55% duty. Same as IDD1. Same as IDD1. Existence of EXT Oscillation. Same as IDD1. Disappearance of EXT Oscillation. Same as IDD1.VCE=VOUT 0.95. Same as IDD1.VCE=0V. L, SD, CL,Tr., etc. connected 70 70 50 85 153 MIN 1.950 10 0.80 0.70 13.6 1.9 140 140 75 55 100 180 27.3 3.9 210 210 80 60 115 207 0.5 0.90 TYP 2.000 MAX 2.050 Ta=25: UNITS V V V V A A % % kHz kHz A V 0.20 0.25 -0.25 V A A % e EXT "High" On Resistance EXT "Low" On Resistance Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Stand-by Current CE "High" Voltage CE "Low" Voltage CE "High" Current CE "Low" Current Efficiency 0.75 Measuring conditions: Unless otherwise specified, connect CE to VOUT, VIN=VOUT 0.6, IOUT=10mA. See Typical Application Circuits, Fig.4. Note: 1."Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". XC6383D301MR PARAMETER Output Voltage VOUT=3.0V SYMBOL VOUT VIN VST VHLD IDD1 IDD2 REXTH REXTL DTY1 DTY2 MAX FOSC1 MAX FOSC2 ISTB VCEH VCEL ICEH ICEL EFFI CONDITIONS L, SD, CL,Tr., etc. connected IOUT=1mA IOUT=1mA VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VEXT=VOUT-0.4V. Same as IDD1. VEXT=4.0V. Same as IDD1. Measuring of EXT waveform. IOUT=1mA. Measuring of EXT on-time Same as IDD1. 75% duty. Same as IDD1. 55% duty. Same as IDD1. Same as IDD1. Existence of EXT Oscillation. Same as IDD1. Disappearance of EXT Oscillation. Same as IDD1.VCE=VOUT 0.95. Same as IDD1.VCE=0V. L, SD, CL,Tr., etc. connected 80 70 50 85 153 MIN 2.925 10 0.80 0.70 19.7 2.1 76 76 75 55 100 180 39.4 4.2 114 114 80 60 115 207 0.5 0.90 TYP 3.000 MAX 3.075 Ta=25: UNITS V V V V A A % % kHz kHz A V 0.20 0.25 -0.25 V A A % Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage Supply Current 1(Note1) Supply Current 2 EXT "High" On Resistance EXT "Low" On Resistance Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Stand-by Current CE "High" Voltage CE "Low" Voltage CE "High" Current CE "Low" Current Efficiency 0.75 Measuring conditions: Unless otherwise specified, connect CE to VOUT, VIN=VOUT 0.6, IOUT=30mA. See Typical Application Circuits, Fig.4. Note: 1."Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". s Electrical Characteristics XC6383D501MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage Supply Current 1(Note1) Supply Current 2 EXT "High" On Resistance EXT "Low" On Resistance Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Stand-by Current CE "High" Voltage CE "Low" Voltage CE "High" Current CE "Low" Current Efficiency VOUT=5.0V SYMBOL VOUT VIN VST VHLD IDD1 IDD2 REXTH REXTL DTY1 DTY2 MAX FOSC1 MAX FOSC2 ISTB VCEH VCEL ICEH ICEL EFFI CONDITIONS L, SD, CL,Tr., etc. connected IOUT=1mA IOUT=1mA VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VEXT=VOUT-0.4V. Same as IDD1. VEXT=4.0V. Same as IDD1. Measuring of EXT waveform. IOUT=1mA. Measuring of EXT on-time Same as IDD1. 75% duty. Same as IDD1. 55% duty. Same as IDD1. Same as IDD1. Existence of EXT Oscillation. Same as IDD1. Disappearance of EXT Oscillation. Same as IDD1.VCE=VOUT 0.95. Same as IDD1.VCE=0V. L, SD, CL,Tr., etc. connected 85 70 50 85 153 MIN 4.875 10 0.80 0.70 31.7 2.4 50 50 75 55 100 180 63.4 4.8 75 75 80 60 115 207 0.5 0.90 TYP 5.000 MAX 5.125 Ta=25: UNITS V V V V A A % % kHz kHz A V 0.20 0.25 -0.25 V A A % e 0.75 Measuring conditions: Unless otherwise specified, connect CE to VOUT, VIN=VOUT 0.6, IOUT=50mA. See Typical Application Circuits, Fig.4. Note: 1."Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". XC6383E201MR PARAMETER Output Voltage VOUT=2.0V SYMBOL VOUT VIN VST VHLD IIN IDD1 IDD2 RSWON ILxL DTY1 DTY2 MAX FOSC1 MAX FOSC2 VLxLMT EFFI IOUT=1mA. IOUT=1mA. IOUT=0mA(Note 1) VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VLX=0.4V. No external components.VOUT=VLX=10V. Same as IDD1 Measuring of LX waveform. IOUT=1mA. Measuring of LX on-time Same as IDD1. 75% duty. Same as IDD1. 55% duty. Same as IDD1. FOSC>MAXFOSC 2 L, SD, CL etc. connected 70 50 85 153 0.7 70 75 55 100 180 0.70 4.3 13.6 1.9 9.1 8.6 27.3 3.9 13.7 1.0 80 60 115 207 1.1 CONDITIONS L, SD, CL etc. connected MIN 1.950 10 0.80 0.90 TYP 2.000 MAX 2.050 Ta=25: UNITS V V V V A A A A % % kHz kHz V % Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage No-Load Input Current Supply Current 1(Note2) Supply Current 2 LX Switch-On Resistance LX Leakage Current Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 LX Limit Voltage Efficiency Measuring conditions: Unless otherwise specified, connect VDD to VOUT, VIN=VOUT 0.6, IOUT=10mA. See Typical Application Circuits, Fig.5. Note: 1. The Schottky diode (SD) must be type MA735,with reverse current (IR) < 1.0A at reverse voltage (VR)=10.0V. 2. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". When the VDD and VOUT pins are independently used, the voltage range at the VDD pin should be 2.2V to 10V. The IC operates from VDD=0.8V. However, output voltage and oscillator frequency are properly stabilized when VDD=2.2V or higher. s Electrical Characteristics XC6383E301MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage No-Load Input Current VOUT=3.0V SYMBOL VOUT VIN VST VHLD VIN IDD1 IDD2 RSWON ILxL DTY1 DTY2 MAX FOSC1 MAX FOSC2 VLxLMT EFFI IOUT=1mA. IOUT=1mA. IOUT=0mA(Note 1) VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VLX=0.4V. No external components.VOUT=VLX=10V. Same as IDD1 Measuring of LX waveform. IOUT=1mA. Measuring of LX on-time Same as IDD1. 75% duty. Same as IDD1. 55% duty. Same as IDD1. FOSC>MAXFOSC 2 L, SD, CL etc. connected 70 50 85 153 0.7 80 75 55 100 180 0.70 4.6 19.7 2.1 5.2 9.3 39.4 4.2 7.9 1.0 80 60 115 207 1.1 CONDITIONS L, SD, CL etc. connected MIN 2.925 10 0.80 0.90 TYP 3.000 MAX 3.075 Ta=25: UNITS V V V V A A A A % % kHz kHz V % e Supply Current 1(Note2) Supply Current 2 LX Switch-On Resistance LX Leakage Current Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 LX Limit Voltage Efficiency Measuring conditions: Unless otherwise specified, connect VDD to VOUT, VIN=VOUT 0.6, IOUT=30mA. See Typical Application Circuits, Fig.5. Note: 1. The Schottky diode (SD) must be type MA735,with reverse current (IR) < 1.0A at reverse voltage (VR)=10.0V. 2. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". When the VDD and VOUT pins are independently used, the voltage range at the VDD pin should be 2.2V to 10V. The IC operates from VDD=0.8V. However, output voltage and oscillator frequency are properly stabilized when VDD=2.2V or higher. XC6383E501MR PARAMETER Output Voltage VOUT=5.0V SYMBOL VOUT VIN VST VHLD IIN IDD1 IDD2 RSWON ILxL DTY1 DTY2 MAX FOSC1 MAX FOSC2 VLxLMT EFFI IOUT=1mA. IOUT=1mA. IOUT=0mA(Note 1) VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VLX=0.4V. No external components.VOUT=VLX=10V. Same as IDD1 Measuring of LX waveform. IOUT=1mA. Measuring of LX on-time Same as IDD1. 75% duty. Same as IDD1. 55% duty. Same as IDD1. FOSC>MAXFOSC 2 L, SD, CL etc. connected 70 50 85 153 0.7 85 75 55 100 0.70 5.3 31.7 2.4 2.8 10.6 63.4 4.8 4.3 1.0 80 60 115 207 1.1 CONDITIONS L, SD, CL etc. connected MIN 4.875 10 0.80 0.90 TYP 5.000 MAX 5.125 Ta=25: UNITS V V V V A A A A % % kHz kHz V % Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage No-Load Input Current Supply Current 1(Note2) Supply Current 2 LX Switch-On Resistance LX Leakage Current Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 LX Limit Voltage Efficiency Measuring conditions: Unless otherwise specified, connect VDD to VOUT, VIN=VOUT 0.6, IOUT=50mA. See Typical Application Circuits, Fig.5. Note: 1. The Schottky diode (SD) must be type MA735,with reverse current (IR) < 1.0A at reverse voltage (VR)=10.0V. 2. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by "No-Load Input Current (IIN)". When the VDD and VOUT pins are independently used, the voltage range at the VDD pin should be 2.2V to 10V. The IC operates from VDD=0.8V. However, output voltage and oscillator frequency are properly stabilized when VDD=2.2V or higher. s Electrical Characteristics XC6383F201MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage Supply Current 1(Note1) Supply Current 2 EXT "High" On Resistance EXT "Low" On Resistance Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Efficiency VOUT=2.0V SYMBOL VOUT VIN VST VHLD IDD1 IDD2 REXTH REXTL DTY1 DTY2 MAX FOSC1 MAX FOSC2 EFFI IOUT=1mA IOUT=1mA VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VEXT =VOUT-0.4V. Same as IDD1. VEXT=0.4V. Same as IDD1 Measuring of EXT waveform. IOUT=1mA. Measuring of EXT on-time. Same as IDD1. 75% duty. Same as IDD1. 55% duty. L, SD, CL,Tr., etc. connected 70 50 85 153 0.70 13.6 1.9 140 140 75 55 100 180 70 27.3 3.9 210 210 80 60 115 207 CONDITIONS L, SD, CL,Tr., etc. connected MIN 1.950 10 0.80 0.90 TYP 2.000 MAX 2.050 Ta=25: UNITS V V V V A A % % kHz kHz % e Measuring conditions: Unless otherwise specified, connect VDD to VOUT, VIN=VOUT 0.6, IOUT=10mA. See Typical Application Circuits, Fig.6. Note: 1. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. When the VDD and VOUT pins are independently used, the voltage range at the VDD pin should be 2.2V to 10V. The IC operates from VDD=0.8V. However, output voltage and oscillator frequency are properly stabilized when VDD=2.2V or higher. XC6383F301MR PARAMETER Output Voltage VOUT=3.0V SYMBOL VOUT VIN VST VHLD IDD1 IDD2 REXTH REXTL DTY1 DTY2 MAX FOSC1 MAX FOSC2 EFFI IOUT=1mA IOUT=1mA VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VEXT =VOUT-0.4V. Same as IDD1. VEXT=0.4V. Same as IDD1 Measuring of EXT waveform. IOUT=1mA. Measuring of EXT on-time. Same as IDD1. 75% duty. Same as IDD1. 55% duty. L, SD, CL,Tr., etc. connected 70 50 85 153 0.70 19.7 2.1 76 76 75 55 100 180 80 39.4 4.2 114 114 80 60 115 207 CONDITIONS L, SD, CL,Tr., etc. connected MIN 2.925 10 0.80 0.90 TYP 3.000 MAX 3.075 Ta=25: UNITS V V V V A A % % kHz kHz % Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage Supply Current 1(Note1) Supply Current 2 EXT "High" On Resistance EXT "Low" On Resistance Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Efficiency Measuring conditions: Unless otherwise specified, connect VDD to VOUT, VIN=VOUT 0.6, IOUT=30mA. See Typical Application Circuits, Fig.6. Note: 1. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. When the VDD and VOUT pins are independently used, the voltage range at the VDD pin should be 2.2V to 10V. The IC operates from VDD=0.8V. However, output voltage and oscillator frequency are properly stabilized when VDD=2.2V or higher. s Electrical Characteristics XC6383F501MR PARAMETER Output Voltage Maximum Input Voltage Oscillation Start-up Voltage Oscillation Hold Voltage Supply Current 1(Note1) VOUT=5.0V SYMBOL VOUT VIN VST VHLD IDD1 IDD2 REXTH REXTL DTY1 DTY2 MAX FOSC1 MAX FOSC2 EFFI IOUT=1mA IOUT=1mA VIN=VOUT 0.95 VIN=VOUT+0.5V Same as IDD1. VEXT =VOUT-0.4V. Same as IDD1. VEXT=0.4V. Same as IDD1 Measuring of EXT waveform. IOUT=1mA. Measuring of EXT on-time. Same as IDD1. 75% duty. Same as IDD1. 55% duty. L, SD, CL,Tr., etc. connected 70 50 85 153 0.70 31.7 2.4 50 50 75 55 100 180 85 63.4 4.9 75 75 80 60 115 207 CONDITIONS L, SD, CL,Tr., etc. connected MIN 4.875 10 0.80 0.90 TYP 5.000 MAX 5.125 Ta=25: UNITS V V V V A A % % kHz kHz % e Supply Current 2 EXT "High" On Resistance EXT "Low" On Resistance Duty Ratio 1 Duty Ratio 2 Maximum Oscillation Frequency1 Maximum Oscillation Frequency2 Efficiency Measuring conditions: Unless otherwise specified, connect VDD to VOUT, VIN=VOUT 0.6, IOUT=50mA. See Typical Application Circuits, Fig.6. Note: 1. "Supply Current 1" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. When the VDD and VOUT pins are independently used, the voltage range at the VDD pin should be 2.2V to 10V. The IC operates from VDD=0.8V. However, output voltage and oscillator frequency are properly stabilized when VDD=2.2V or higher. s Typical Application Circuits SD L 2 1 L 3 VIN (TOP VIEW) SOT-23 VIN Tr (TOP VIEW) SOT-23 3 VOUT SD CL CB RB 1 2 VOUT + CL e + GND GND L: 100H (SUMIDA, CD-54) SD: MA735 (Schottky diode; MATSUSHITA) CL: 16V 47F (Tantalum capacitor, NICHICON, F93) L: SD: CL: RB: Tr: 47H (SUMIDA, CD-54) MA735 (Schottky diode; MATSUSHITA) 16V 47F (Tantalum capacitor, NICHICON, F93) 1k, CB: 3300pF 2SC3279, 2SD1628G Fig.1 XC6383A Application Fig.2 XC6383B Application CE VOUT L 5 4 L SD (TOP VIEW) SOT-25 3 VIN 3 VOUT SD CL CB RB 4 5 Tr (TOP VIEW) SOT-25 2 1 VIN 1 + CL 2 + CE GND GND L: 100H (SUMIDA, CD-54) SD: MA735 (Schottky diode; MATSUSHITA) CL: 16V 47F (Tantalum capacitor, NICHICON, F93) L: SD: CL: RB: Tr: 47H (SUMIDA, CD-54) MA735 (Schottky diode; MATSUSHITA) 16V 47F (Tantalum capacitor, NICHICON, F93) 1k, CB:3300pF 2SC3279, 2SD1628G Fig.3 XC6383C Application Fig.4 XC6383D Application s Typical Application Circuits SD L 5 4 L 3 Tr VIN 1 2 3 VOUT CB RB 4 5 (TOP VIEW) SOT-25 2 1 VOUT (TOP VIEW) SOT-25 VIN SD + CL VDD e + CL VDD GND GND L: 100H (SUMIDA, CD-54) SD: MA735 (Schottky diode; MATSUSHITA) CL: 16V 47F (Tantalum capacitor, NICHICON, F93) L: SD: CL: RB: Tr: 47H (SUMIDA, CD-54) MA735 (Schottky diode; MATSUSHITA) 16V 47F (Tantalum capacitor, NICHICON, F93) 1k, CB: 3300pF 2SC3279, 2SD1628G Fig.5 XC6383E Application Fig.6 XC6383F Application (Step-Down circuit......built-in switching transistor type) L VOUT (High Output Voltage circuit......external switching transistor type) L SD VOUT RBE 3 VIN CB RB 2 (TOP VIEW) 1 VIN Tr SD CL 3 2 (TOP VIEW) 1 R1 SOT-25 SOT-25 CL 4 5 CB RB 4 5 R2 GND GND Fig.7 XC6383E Application Fig.8 XC6383F Application s Typical Application Circuits (Polarity Reverse circuit......built-in switching transistor type) (Low Output Voltage step-up circuit...... external switching transistor type) CIN-OUT Tr RBE VIN (TOP VIEW) SD -VOUT VDD CIN-OUT GND 3 2 SOT-25 1 L CL Tr VIN CB L RB 3 2 (TOP VIEW) 1 CL CB RB 4 5 SOT-25 e 4 5 -VOUT SD GND Fig.9 XC6383E Application Note: It is recommended that the max. input voltage between the VDD and Vss pins should not exceed 10V. Fig.10 XC6383F Application Note: It is recommended that the max. input voltage between the VDD and Vss pins should not exceed 10V. Also applicable to the XC6381 and XC6382 series. s XC638xA (Built-in Switching Transistor) (1)OUTPUT VOLTAGE vs. OUTPUT CURRENT OUTPUT VOLTAGE:VOUT(V) OUTPUT VOLTAGE:VOUT(V) e OUTPUT CURRENT:IOUT(mA) OUTPUT CURRENT:IOUT(mA) OUTPUT VOLTAGE:VOUT(V) OUTPUT CURRENT:IOUT(mA) OUTPUT VOLTAGE:VOUT(V) OUTPUT CURRENT:IOUT(mA) OUTPUT VOLTAGE:VOUT(V) OUTPUT CURRENT:IOUT(mA) (2)EFFICIENCY vs. OUTPUT CURRENT EFFICIENCY:EFFI(%) EFFICIENCY:EFFI(%) OUTPUT CURRENT:IOUT(mA) OUTPUT CURRENT:IOUT(mA) EFFICIENCY:EFFI(%) OUTPUT CURRENT:IOUT(mA) EFFICIENCY:EFFI(%) OUTPUT CURRENT:IOUT(mA) EFFICIENCY:EFFI(%) OUTPUT CURRENT:IOUT(mA) s XC638xA (Built-in Switching Transistor) (3)RIPPLE VOLTAGE vs. OUTPUT CURRENT XC6382A301 XC6381A301 100 L=100H, C=47F(Tantalum) XC6383A301 100 L=100H, C=47F(Tantalum) 100 L=100H, C=47F(Tantalum) VIN=1.8V RIPPLE:Vr (mVp-p) RIPPLE:Vr (mVp-p) RIPPLE:Vr (mVp-p) 80 80 80 60 VIN=1.8V 1.2V 60 60 VIN=1.5V 40 40 40 1.5V 20 20 20 1.5V 0 0 20 40 60 80 100 0 0 20 1.2V 0.9V 0 20 40 60 80 100 1.2V 40 60 80 100 0 e OUTPUT CURRENT:IOUT(mA) OUTPUT CURRENT:IOUT(mA) OUTPUT CURRENT:IOUT(mA) XC6382A501 L=100H, C=47F(Tantalum) XC6383A501 L=100H, C=47F(Tantalum) 120 100 80 60 40 20 0 120 RIPPLE:Vr (mVp-p) RIPPLE:Vr (mVp-p) VIN=3.0V 100 80 VIN=3.0V 2.0V 60 40 20 2.0V 1.5V 0 20 40 60 80 100 1.5V 0 0 20 40 60 80 100 OUTPUT CURRENT:IOUT(mA) OUTPUT CURRENT:IOUT(mA) s XC638xB (External Switching Transistor) (1)TYPICAL OUTPUT VOLTAGE vs. OUTPUT CURRENT L=22H(CD105), RB=300, No CB L=22H(CD105), RB=300, CB=0.1F OUTPUT VOLTAGE:VOUT (V) OUTPUT VOLTAGE:VOUT (V) 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 100 200 300 400 500 3.5 3.0 2.5 1.8V 1.2V 1.5V VIN=1.0V 1.8V 1.2V 2.0 1.5 1.0 0.5 0.0 0 100 200 300 1.5V VIN=1.0V 400 500 OUTPUT CURRENT:IOUT(mA) OUTPUT CURRENT:IOUT(mA) L=22H(CD54), RB=500, No CB L=22H(CD105), RB=300, CB=0.1F OUTPUT VOLTAGE:VOUT (V) 5 4 3 2 1 0 3.0V OUTPUT VOLTAGE:VOUT (V) 6 6 5 4 3 2 1 0 3.0V 2.0V 1.5V VIN=1.2V 2.0V VIN=1.5V 0 100 200 300 400 500 0 200 400 600 800 OUTPUT CURRENT:IOUT(mA) OUTPUT CURRENT:IOUT(mA) s XC638xB (External Switching Transistor) (2)EFFICIENCY vs. OUTPUT CURRENT EFFICIENCY:EFFI(%) e OUTPUT CURRENT:IOUT(mA) EFFICIENCY:EFFI(%) OUTPUT CURRENT:IOUT(mA) EFFICIENCY:EFFI(%) OUTPUT CURRENT:IOUT(mA) EFFICIENCY:EFFI(%) OUTPUT CURRENT:IOUT(mA) (3)RIPPLE VOLTAGE vs. OUTPUT CURRENT 400 400 RIPPLE:Vr (mVp-p) RIPPLE:Vr (mVp-p) 300 VIN=1.8V 200 300 VIN=1.8V 200 1.5V 100 1.2V 100 1.2V 0 0 100 200 1.5V 300 400 500 0 0 100 200 300 400 500 OUTPUT CURRENT:IOUT (mA) OUTPUT CURRENT:IOUT (mA) 500 500 VIN=3.0V RIPPLE:Vr (mVp-p) 400 300 200 2.0V 100 1.5V 0 0 100 200 300 400 500 RIPPLE:Vr (mVp-p) 400 300 200 100 0 VIN=3.0V 2.0V 1.5V 0 200 400 600 800 OUTPUT CURRENT:IOUT (mA) OUTPUT CURRENT:IOUT (mA) s XC6383A501 Characteristics (1)OPERATING START VOLTAGE, RETAIN VOLTAGE vs. OUTPUT CURRENT OPERATING START VOLTAGE, RETAIN VOLTAGE:VST,VHLD (V) (2)OUTPUT VOLTAGE vs. TEMPERATURE OUTPUT VOLTAGE:VOUT(V) e TEMPERATURE:Ta (:) OUTPUT CURRENT:IOUT (mA) (3)OPERATING START VOLTAGE, RETAIN VOLTAGE vs. TEMPERATURE OPERATING START VOLTAGE, RETAIN VOLTAGE:VST,VHLD (V) (4)CURRENT CONSUMPTION 1 vs. TEMPERATURE CURRENT CONSUMPTION 1:IDD1 (uA) TEMPERATURE:Ta (:) TEMPERATURE:Ta (:) s XC6383A501 Characteristics (5)CURRENT CONSUMPTION 2 vs. TEMPERATURE CURRENT CONSUMPTION 2:IDD2 (A) (6)Lx SWITCHING-ON RESISTANCE vs. TEMPERATURE Lx SWITCHING-ON RESISTANCE:RSWON () AMB. TEMPERATURE:Ta (:) AMB. TEMPERATURE:Ta (:) (7)MAX. OSC FREQUENCY1,2 vs. AMB. TEMPERATURE MAXIMUM OSC FREQUENCY1,2 :MAXFOSC1,2 (kHz) (8)DUTY RATIO 1,2 vs. AMB. TEMPERATURE DUTY RATIO 1,2:DUTY1,2 (%) AMB. TEMPERATURE:Ta (:) AMB. TEMPERATURE:Ta (:) s HIGH VOLTAGE OUTPUT CIRCUIT MEASUREMENT (XC6383F APPLICATIONS) OUTPUT VOLTAGE vs. OUTPUT CURRENT EFFICIENCY vs. OUTPUT CURRNET RIPPLE vs. OUTPUT CURRENT OUTPUT VOLTAGE:VOUT(V) EFFICIENCY:EFFI (%) e OUTPUT CURRENT:IOUT(mA) OUTPUT CURRENT:IOUT(mA) RIPPLE:Vr (mVp-p) OUTPUT CURRENT:IOUT (mA) s HIGH VOLTAGE OUTPUT CIRCUIT MEASUREMENT (XC6383F APPLICATIONS) OUTPUT VOLTAGE vs. OUTPUT CURRENT EFFICIENCY vs. OUTPUT CURRENT RIPPLE vs. OUTPUT CURRENT OUTPUT VOLTAGE:VOUT (V) EFFICIENCY:EFFI (%) 3V(Top), 2.5V 3V(Top), 2.5V OUTPUT CURRENT:IOUT (mA) OUTPUT CURRENT:IOUT (mA) RIPPLE:Vr(mVp-p) OUTPUT CURRENT:IOUT (mA) s POLARITY REVERSE CIRCUIT MEASUREMENT (XC6383E APPLICATIONS) OUTPUT VOLTAGE vs. OUTPUT CURRENT EFFICIENCY vs. OUTPUT CURRENT RIPPLE vs. OUTPUT CURRNET OUTPUT VOLTAGE:VOUT(V) EFFICIENCY:EFFI(%) OUTPUT CURRENT:IOUT (mA) OUTPUT CURRENT:IOUT(mA) RIPPLE:Vr(mVp-p) OUTPUT CURRENT:IOUT(mA) s NEGATIVE VOLTAGE STEP-UP CIRCUIT CHARACTERISTICS (XC6383F APPLICATIONS) OUTPUT VOLTAGE vs. OUTPUT CURRENT EFFICIENCY vs. OUTPUT CURRENT RIPPLE vs. OUTPUT CURRENT EFFICIENCY:EFFI (%) RIPPLE:Vr (mVp-p) OUTPUT:VOUT (V) |
Price & Availability of XC6383SERIES |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |