|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TC series Tantalum capacitors Chip tantalum capacitors TC Series Features ( M ) Newly designed ROHM original CSP structure ( face-down terminal ) provides, 1) Excellent adhesion. 2) Easy visual recognition of fillets. 3) Expanded capacitance range with Low ESR. External dimensions (Unit : mm) Anode mark (Unit : mm) Dimensions H M case 1.6 + 0.1 - 0.85 + 0.1 - 0.55 + 0.1 - 0.8 + 0.1 - 0.5 + 0.1 - L W1 W1 W2 H L W2 S S S Features ( P , A ) 1) Vital for all hybrid integrated circuits board application. 2) Wide capacitance range. 3) Screening by thermal shock. External dimensions (Unit : mm) Anode mark (Unit : mm) L H W1 Dimensions L W1 P case 2.0 + 0.2 - 1.25 + 0.2 - 0.9 + 0.2 - A case 3.2 + 0.2 - 1.6 + 0.2 - 1.2 + 0.2 - 1.6 + 0.2 - 0.8 + 0.3 - W2 W2 H Max.1.20 0.45 + 0.3 - S S S + - Model name configuration Nominal capacitance in pF in 3 digits: 2 significant figures followed by the figure repesenting the nymber of 0's. Series name Case style Nominal capacitance TC M Code 0G 0J 1A 1C 1D 1E 1A Rated voltage (V) 4 6.3 10 16 20 25 4 7 5 M 8R 8 : Tape width R : Positive electrode on the side opposite to sprocket hole Rated voltage Capacitance tolerance Code Capacitance tolerance K M + 10% - + - 20% Rev.A 1/13 TC series Tantalum capacitors Rated Table. Marking Raited voltage (V.DC) F A E J N S W a e j n s w 4 0G 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 P P 6.3 0J 10 1A M,P 16 1C M,P,A A A A A A A 20 1D P,A A A A A 25 1E P,A A A A P P P,A P,A M,P,A P,A M,P,A M,P,A M,P,A P,A W,P,A P,A P,A A A M,P,A M,P,A P,A M,P,A A A A P,A A A A Voltge code Capacitance code M case (1608) ja Voltge code Capacitance code P case (2012) jJ Voltge code Capacitance code Acase (3216) ja Rev.A 2/13 TC series Tantalum capacitors Characteristics Item Operating Temperature -55 C+125 C Performance Test conditions (based on JIS C 5101-1 and JIS C 5101-3) Voltage reduction when temperature exceeds+85 C Maximum operating +85 C temperature with no voltage derating Rated voltage (VDC) Category voltage (VDC) Surge voltage (VDC) DC Leakage current M case P, Acase M case 4 6.3 10 16 4 6.3 10 16 20 2.5 4 6.3 10 at 85 C at 125 C P, Acase 2.5 4 6.3 10 13 M case 5.2 8 13 20 at 85 C P, Acase 5.2 8 13 20 26 0.5 F or 0.01CV whichever is greater Shown in " Standard list " Mcase P,Acase Ratedvoltage for 5min Rated voltage for 1min Capacitance tolerance Tangent of loss angle (Df, tan ) Measuring frequency : 120 +12Hz - + 20% Shall be satisfied allowance range. M case - Measuring voltage : 0.5Vrms +1.5~2V.DC P,Acase +10%, + 20% Shall be satisfied allowance range. Measuring circut - - : DC Equivalent series circuit Shall be satisfied the voltage on " Standard list " Measuring frequency : 120 +12Hz - Measuring voltage : 0.5Vrms +1.5~2V.DC Measuring circut : DC Equivalent series circuit Impedance Resistance to Soldering heat Shall be satisfied the voltage on " Standard list " Appearance L.C. There should be nosignificant abnormality. The indications should be clear. Measuring frequency : 100 +10kHz - Measuring voltage : 0.5Vrms or less Dip in the solder bath + Solder temp : 260-5 C Duration : 5+0.5s - Repetition :1 M case P,Acase M case P case A case Less than 200% of initial limit Shall be satisfied the value in Item No.6 Within +20% of initial value - + -10% of initial value + - 5% of initial value C / C Df (tan ) M case P case A case Less than 200% of initial limit Less than 150% of initial limit Less than initial limit Rev.A 3/13 TC series Tantalum capacitors Item Temperature cycle Appearance L.C C / C Performance There should be no significant abnormality. M case P , A case M cas P case A case Less than 200% of initial limit Less than initial limit + Within - 20% of initial limit 1~10F: within + 10% of initial value - 15~22F: within + 20% of initial value - TCA1A226 , TCA0J476 : Within +15% of intial value - Others : Within +10% of initial value - Less than 200% of initial limit Less than 150% of initial limit Less than initial limit Test conditions (based on JIS C 5101-1 and JIS C 5101-3) Repetition : 5 cycles (1 cycle : steps 1~4) without discontinuation. 1 2 3 4 Temp. + -55-3 C Room temp. 125+2 C - Room temp. Time 30+3min - 3min.or less 30+3min - 3min.or less Df (tan ) Moisture resistance Appearance L.C C / C Df (tan ) M case P case A case There should be no significant abnormality. The indications should be After leaving the sample under such atmospheric condition that the temperature and humidity are 60 2 C and 90 to 95% RH,respectiveiy,for 500 12h M case Less than 200% of initial limit leave it at room P , A case Shall be satisfied the value in Item No.6 temperature for 1 to 2h and then measure the sample. M , P case Within+ 20% of initial limit - A case M case P case A casr Within+ 10% of initial limit - Less than 200% of initial limit Less than 150% of initial limit Less than initial limit Temperature Stebility Temp. C / C Df (tan ) L.C Temp. C / C Df (tan ) L.C Temp. C / C Df (tan ) L.C -55 C M , P case Within 0/-15% of initial value A case Within 0/-12% of initial value Shall be satisfied the voltage on " Standard list " - +85 C M , P case Within +15/0 of initial value A case Within +12/0% of initial value Shall be satisfied the voltage on " Standard list " 5 A or 0.1CV whitchever is greater +125 C M , P case Within +20/0 of initial value A case Within +15/0% of initial value Shall be satisfied the voltage on " Standard list " 6.3 A or 0.125CV whitchever is greater Surge voltage Appearance There should be no significant avnormality. M case P , A case M case P case M case P case A case L.C C / C Df (tan ) Less than 200% of initial limit Less than initial limit Within+ 20% of initial value - Within+ 10% of initial value - Less than 200% of initial limit Apply the spesified sergevoltage every 5+0.5 min. - for 30+5 s. each time in the atmospheric condition - of 85+2 C. - Repeat this rocedure 1,000 times. Less than 150% of initial limit Less than initial limit Rev.A 4/13 TC series Tantalum capacitors Item Loading at High temperature Performance Appearance M , A case There should be nosignificant abnormality. There should be nosignificant P case abnormality. The indications should be clear. L.C Less than 200% of initial limit M case P , A case Less than initial limit Within + 20% of initial value M case C / C - Within+ 10% of initial value P case - A case Test conditions (based on JIS C 5101-1 and JIS C 5101-3) M , P case : After applying the rated voltage for 1000+36 h without discontinuation via the serial resistance of 3 or less at a temperature of 85+2 C, leave the sample at room - temperature / humidity for 1 to 2h and measure the value. A case : After applying the rated voltage for 2000+72 h without discontinuation via the serial resistance of 3 or less at a tempera+ ture of 85-2 C, leave the sample at room temperature / humidity for 1 to 2h and measure the value. TCA1A226 Others , TCA0J476 within +15% of initial value - within +10% of initial value - Less than 200% of initial limit 150% of initial limit less than Less than initial limit Df (tan ) M case P case A case Terminal strength Capacitance The measured value should be stable. Appearance There should nosignificant abnormality. A force is applied to the terminal until it bends to 1mm and by a perscribed tool maintain the condition for5s.(See the figure below) 50 20 (Unit : mm) F (Apply force) R230 1mm thickness=1.6mm 45 45 Adhesiveness The terminal should not come off. Apply force of 5N in the two directions shown + in the figure below for 10 - 1s after mounting the terminal on a circuit board. product C105 Apply force YAA a circuit board Dimensions Resistance to solvents Solderability Refer to "External dimensions" The indication should be clear 3 / 4 or more surface area of the solder coated terminal dipped in the soldering bath should be covered with the new solder. Measure using a caliper of JISB 7507 Class 2 or higher grade. + Dip in the isopropyl alcohol for 30-5s, at room temperature. Dip speed=25 + 2.5mm / s - Pre-treatment(accelerated aging): Leave the sample on the boiling distilled water for 1 h. Solder temp. : 235 + 5 C . - : 2 + 0.5s Duration - : H63A Solder : Rosin25% Flux IPA75% Frequency : 10 to 55 to 10Hz/min. Amplitude : 1.5mm Time : 2h each in X and Ydirections Mounting : The terminal is soldered on a print circuit board. Vibration Capacitance Appearance Measure value shoule not fluctuate during the measurement. There should no significant abnormality. Rev.A 5/13 TC series Tantalum capacitors Standard list, TC series < M case : 1608 size > Part No. Rated Voltage 85 C (V) Category Voltage 125 C (V) Surge Voltage 85 C (V) Cap. 120Hz Tolerance (F) 4.7 (%) Leakage Current 25 C 1WV 5min -55 C (A) 0.5 Df 120Hz (%) 25 C 125 C Impedance 100kHz 85 C () TC M 0G 475 TC M 0G 106 TC M 0G 226 TC M 0J 475 TC M 0J 685 TC M 0J 106 TC M 1A 105 TC M 1A 225 TC M 1A 475 TC M 1C 105 16 10 20 10 6.3 13 6.3 4 8 4 2.5 5.2 10 22 4.7 6.8 10 1.0 2.2 4.7 1.0 +20 - 30 20 30 9.0 1.8 +20 - 0.5 0.6 30 20 30 9.0 15 +20 - +20 - 0.5 10 20 10 15 30 15 15.0 13.5 9.0 15.0 30 15 0.5 + =Tolerance (M : - 20%) Rev.A 6/13 TC series Tantalum capacitors < P case : 2012 size > Part No. Rated Voltage 85 C (V) Cstegory Voltage 125 C (V) Surge Voltage 85 C (V) Cap. 120Hz (mF) Tolerance Leakage Current 25 C 1WV.60s (mA) (%) Df 120Hz (%) 25 C 85 C 10 Impedance 100kHz -55 C 15 125 C 15 () TC P 0G 225 TC P 0G 335 TC P 0G 475 TC P 0G 685 TC P 0G 106 TC P 0G 156 TC P 0G 226 TC P 0J 155 TC P 0J 225 TC P 0J 335 TC P 0J 475 TC P 0J 685 TC P 0J 106 TC P 0J 156 TC P 1A 105 TC P 1A 155 TC P 1A 225 TC P 1A 335 TC P 1A 475 TC P 1A 685 TC P 1A 106 TC P 1C 105 16 10 20 + =Tolerance (M : + 20%,K : -10%) - 2.2 3.3 4.7 4 2.5 5.2 6.8 10 15 22 1.5 2.2 3.3 6.3 4 8 4.7 6.8 10 15 1.0 1.5 2.2 10 6.3 13 3.3 4.7 6.8 10 1.0 +20,10 - - +20,10 0.5 +20,10 - 30 20 30 27.5 0.6 0.9 15 10 15 0.5 +20,10 - 30 20 30 27.5 0.6 0.9 15 10 15 0.5 30 20 30 27.5 0.5 15 10 15 27.5 Rev.A 7/13 TC series Tantalum capacitors < A case : 3216 size > Rated Voltage 85 C (V) Part No. Category Voltage 125 C (V) Surge Voltage 85 C (V) Cap. 120Hz Tolerance (F) (%) Leakage Current 25 C 1WV 5min -55 C (A) Df 120Hz (%) Impedance 100kHz 25 C 85 C 6 125 C 8 () TC A 0G 475 TC A 0G 685 TC A 0G 106 TC A 0G 156 TC A 0G 226 TC A 0G 336 TC A 0G 476 TC A 0G 686 TC A 0J 335 TC A 0J 475 TC A 0J 685 TC A 0J 106 TC A 0J 156 TC A 0J 226 TC A 0J 336 TC A 0A 476 TC A 1A 155 TC A 1A 225 TC A 1A 335 TC A 1A 475 TC A 1A 685 TC A 1A 106 TC A 1A 156 TC A 1A 226 TC A 1C 105 TC A 1C 155 TC A 1C 225 TC A 1C 335 TC A 1C 475 TC A 1C 685 TC A 1C 106 TC A 1D 105 20 13 26 + =Tolerance (M : + 20%,K : -10%) - 4.7 6.8 10 4 2.5 5.2 15 22 33 47 68 3.3 4.7 6.8 6.3 4 8 10 15 22 33 47 1.5 2.2 3.3 10 6.3 13 4.7 6.8 10 15 22 1.0 1.5 2.2 16 10 20 3.3 4.7 6.8 10 1.0 10 0.5 12 8 10 20.0 14 30 34 10 10 12 18 6 12 16 24 8 +20,10 - 0.6 0.9 1.3 1.9 2.7 0.5 12 8 10 +20,10 - 0.6 20.0 0.9 1.4 14 30 34 10 10 12 18 6 12 16 24 8 2.1 3.0 0.5 12 +20,10 - 8 10 20.0 10 10 12 0.7 1.0 1.5 2.2 12 14 30 12 16 0.5 + 20,10 - 0.8 1.1 0.6 10 6 8 20.0 12 10 8 6 10 8 20.0 + 20,10 - 0.5 Rev.A 8/13 TC series Tantalum capacitors Packaging specifications Tape [ M case ] Reel [ M case ] Sprolet hold Do E +1.0 9.0 0 11.4+1.0 - A F B W 13+0.2 - P1 P2 P0 pull direction Label sticking position Unit : [mm] EIAJ ET-7002A Case M A+0.1 B+0.1 W+ 0.2 E+0.1 F +0.05 P1+0.1 P2+0.05 P0+0.1 - - - - - - - - 1.0 1.85 8.0 1.75 3.5 4.0 2.0 4.0 Tape [ P.A case ] Reek [ P.A case ] Sprolet hole Do A B E F W +1.0 9.0 0 t1 11.4+1.0 - 13+0.2 - t2 Component is loadee P1 P2 P3 Pull-out direction Unit : [mm] Case P A A+0.1 - 1.55 1.9 B+0.1 - 2.3 3.5 W+0.1 - 8.0 8.0 E+0.1 - 1.75 1.75 F+0.1 - 3.5 3.5 P1+0.1 P2+0.05 P0+0.1 - - - 4.0 4.0 2.0 2.0 4.0 4.0 Pull direction Labelsticling position EIAJ ET-7002A Packaging style Case code package Packaging style Symbol Basic ordering units 4,000pcs M P A Taping plastic taping 180mmReel R 3,000pcs 2,000pcs Rev.A 0 180 -1.5 60 +1 0 0 180 1.5 60 +1 0 9/13 TC series Tantalum capacitors Electrical characteristics and operation notes (1) Soldering conditions (soldering temperature and soldering time) Preheat 170 280 Reflow zone TEMPERATURE ( C) 160 TEMPERATURE ( C) 260 150 240 140 220 130 0 60 90 120 150 180 200 0 10 20 30 40 50 60 70 TIME (sec) TIME (sec) Fig.1 reflow soldering 270 260 340 TEMPERATURE ( C) TEMPERATURE ( C) 250 240 230 220 210 200 0 320 300 280 2 4 6 8 10 12 14 16 0 5 10 15 20 25 TIME (sec) TIME (sec) Fig.2 Flow soldering (Dip wave soldering) Fig.3 Hand soldering (Wattage : 30W MAX.) (2) Leakage current-to-voltage ratio LEALKAGE CURRENT RATIO DCL / DCL 1 0.1 0.01 0 20 40 60 80 100 % OF RATED VOLTAGE (VR) Fig.4 Rev.A 10/13 TC series Tantalum capacitors (3) Derating voltage as function of temperature 100 PERCENT OF 85 C RVDC1 (VR) 85 C Rated Voltage (V.DC) Surge Voltage (V.DC) 5.2 8 13 20 26 125 C Category Voltage (V.DC) 2.5 4 6.3 10 13 Surge Voltage (V.DC) 3.4 5 9 12 16 90 80 4 6.3 70 10 16 20 60 50 75 85 95 105 115 125 TEMPERATURE ( C) Fig.5 (4) Reliability The malfunction rate of tantalum solid state electrolytic capacitors varies considerably depending on the conditions of usage (ambient temperature, applied voltage, circuit resistance). Formula for calculating malfunction rate p = b x (E x SR x Q x CV) p b E SR Q CV : Malfunction rate stemming from operation : Basic malfunction rate : Environmental factors : Series resistance : Level of malfunction rate : Capacitance For details on how to calculate the malfunction rate stemming from operation, see the tantalum solid state electrolytic capacitors column in MIL-HDBK-217. Malfunction rate as function of operating temperature and rated voltage 1.0 Ratio= Malfunction rate as function of circuit resistance (/V) 6.0 RESISTANCE COEFFICIENT () FAILURE RATE COEFFICIENT Applied Voltage Rated Voltage 0.5 0.3 0.2 0.1 0.06 0.03 0.02 0.01 20 40 60 1.0 4.0 0.7 2.0 0.5 1.0 0.8 0.6 0.4 0.3 0.1 85 0.1 0.2 0.4 0.6 1.0 2.0 3.0 OPERATING TEMPERATURE ( C) RESISTANCE OF CIRCUIT ( / V) Fig.6 Fig.7 Rev.A 11/13 TC series Tantalum capacitors (5) Maximum power dissipation Warming of the capacitor due to ripple voltage balances with warming caused by Joule heating and by radiated heat. Maximum allowable warming of the capacitor is to 5C above ambient temperature. When warming exceeds 5C, it can damage the dielectric and cause a short circuit. Power dissipation (P) = I2 * R Ripple current P : As shown in table at right R : Equivalent series resistance Notes: 1. Please be aware that when case size is changed, maximum allowable power dissipation is reduced. 2. Maximum power dissipation varies depending on the package. Be sure to use a case which will keep warming within the limits shown in the table below. Allowable power dissipation (W) and maximum temperature rising Case Temp. +25 C +55 C +85 C +125 C P case (2012) A case (3216) Max. Temp Rise [ C] 0.025 0.070 5 0.022 0.063 5 0.020 0.056 5 0.010 0.028 2 (6) Impedance frequency characteristics 100000 10000 IMPEDANCE () (7) ESR frequency characteristics 100 A105 P case (2012) G475 A case (3216) C105 A case (3216) 1000 100 10 1 A105 P case (2012) G475 A case (3216) C105 A case (3216) 10 ESR () 1 1 100 10k 1M 100M 500M 0.1 1 100 10k 1M 100M 500M FREQUENCY (Hz) FREQUENCY (Hz) Fig.10 Fig.11 (8) Temperature characteristics 10 CAP 120Hz 10V-1F P case (2012) 4V-4.7F A case (3216) 5 DF 120Hz 10V-1F P case (2012) 4V-4.7F A case (3216) 6 CAP CHANGE (%) 4 2 0 -2 DF (%) 25 85 125 3 2 -26 1 -10 -55 0 -55 25 85 125 TEMPERATURE ( C) TEMPERATURE ( C) Fig.12 Fig.13 Rev.A 12/13 TC series Tantalum capacitors 1000 LC 1WV 10V-1F P case (2012) 4V-4.7F A case (3216) 3 IMPEDANCE 100kHz 10V-1F P case (2012) 4V-4.7F A case (3216) IMPEDANCE () 100 LC (nA) 2 10 1 0 -55 25 85 125 0 -55 25 85 125 TEMPERATURE ( C) TEMPERATURE ( C) Fig.14 Fig.15 Rush current The rush current is in inverse proportion to the ESR. The excessive rush current may cause a damage. 100 33F 33F tantalum capactior aluminum electrolysis 100F 10 15F INRUSH CURRENT (A) 4.7F 4.7F 47F 22F 1 Vpp=10V llimit=20A Pulse Width=500sec. Power OP Amp Slew Rate=10V/6s 0.1 0.1 1 ESR (100kHz) 10 100 Fig. 16 Max. rush current and ESR The rush current may be reduced by the protection resistors 100 SAMPLE 16V-3.3F Pulse width=500sec Slew rate=10V-6c Current limit=20A R=0 10 R (A) V I = 0.476 0.25 0.5 1.0 2.0 5.0 I 1 V I = 0.476+R 0.1 0.1 1 V (V) 10 100 Fig. 17 Change in I max by protection resistors Rev.A 13/13 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of TCA1A155K |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |