![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS Copyright (c) 1997, Power Innovations Limited, UK MARCH 1994 - REVISED SEPTEMBER 1997 TELECOMMUNICATION SYSTEM SECONDARY PROTECTION q Ion-Implanted Breakdown Region Precise and Stable Voltage Low Voltage Overshoot under Surge DEVICE `3240F3 `3260F3 `3290F3 `3320F3 `3380F3 VDRM V 180 200 220 240 270 V(BO) V 240 260 290 320 380 D PACKAGE (TOP VIEW) T NC NC R 1 2 3 4 8 7 6 5 G G G G MDXXAE NC - No internal connection P PACKAGE (TOP VIEW) q Planar Passivated Junctions Low Off-State Current < 10 A Rated for International Surge Wave Shapes WAVE SHAPE 2/10 s 8/20 s 10/160 s 10/560 s 0.5/700 s 10/700 s 10/1000 s STANDARD FCC Part 68 ANSI C62.41 FCC Part 68 FCC Part 68 RLM 88 FTZ R12 VDE 0433 CCITT IX K17/K20 REA PE-60 ITSP A 175 120 60 45 38 50 50 50 35 T G G R 1 2 3 4 8 7 6 5 T G G R MDXXAF q Specified T terminal ratings require connection of pins 1 and 8. Specified R terminal ratings require connection of pins 4 and 5. SL PACKAGE (TOP VIEW) T G R 1 2 3 MDXXAG MD23AA q Surface Mount and Through-Hole Options PACKAGE Small-outline Small-outline taped and reeled Plastic DIP Single-in-line PART # SUFFIX D DR P SL device symbol T R q UL Recognized, E132482 SD3XAA description These high voltage dual symmetrical transient voltage suppressor devices are designed to protect telecommunication applications with ground backed ringing against transients caused by lightning strikes and a.c. power lines. Offered in five voltage variants to meet battery and protection requirements they are guaranteed to suppress and withstand the listed international lightning surges in both polarities. Transients are initially clipped by breakdown clamping until the voltage rises to the breakover level, which G Terminals T, R and G correspond to the alternative line designators of A, B and C causes the device to crowbar. The high crowbar holding current prevents d.c. latchup as the current subsides. These monolithic protection devices are fabricated in ion-implanted planar structures to PRODUCT INFORMATION Information is current as of publication date. Products conform to specifications in accordance with the terms of Power Innovations standard warranty. Production processing does not necessarily include testing of all parameters. 1 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 description (Continued) ensure precise and matched breakover control and are virtually transparent to the system in normal operation The small-outline 8 pin assignment has been carefully chosen for the TISP series to maximise the inter-pin clearance and creepage distances which are used by standards (e.g. IEC950) to establish voltage withstand ratings. absolute maximum ratings RATING `3240F3 `3260F3 Repetitive peak off-state voltage (0C < TJ < 70C) `3290F3 `3320F3 `3380F3 Non-repetitive peak on-state pulse current (see Notes 1, 2 and 3) 1/2 s (Gas tube differential transient, open-circuit voltage wave shape 1/2 s) 2/10 s (FCC Part 68, open-circuit voltage wave shape 2/10 s) 8/20 s (ANSI C62.41, open-circuit voltage wave shape 1.2/50 s) 10/160 s (FCC Part 68, open-circuit voltage wave shape 10/160 s) 5/200 s (VDE 0433, open-circuit voltage wave shape 2 kV, 10/700 s) 0.5/310 s (RLM 88, open-circuit voltage wave shape 1.5 kV, 0.5/700 s) 5/310 s (CCITT IX K17/K20, open-circuit voltage wave shape 2 kV, 10/700 s) 5/310 s (FTZ R12, open-circuit voltage wave shape 2 kV, 10/700 s) 10/560 s (FCC Part 68, open-circuit voltage wave shape 10/560 s) 10/1000 s (REA PE-60, open-circuit voltage wave shape 10/1000 s) Non-repetitive peak on-state current (see Notes 2 and 3) 50 Hz, 1s D Package P Package SL Package Initial rate of rise of on-state current, Junction temperature Storage temperature range Linear current ramp, Maximum ramp value < 38 A diF/dt TJ Tstg ITSM ITSP 350 175 120 60 50 38 50 50 45 35 4 6 6 250 -40 to +150 -40 to +150 A/s C C A rms A VDRM SYMBOL VALUE 180 200 220 240 270 V UNIT NOTES: 1. Further details on surge wave shapes are contained in the Applications Information section. 2. Initially the TISP must be in thermal equilibrium with 0C < TJ <70C. The surge may be repeated after the TISP returns to its initial conditions. 3. Above 70C, derate linearly to zero at 150C lead temperature. electrical characteristics for the T and R terminals, TJ = 25C PARAMETER IDRM ID Coff Repetitive peak offstate current Off-state current TEST CONDITIONS VD = 2VDRM, 0C < TJ < 70C VD = 50 V f = 100 kHz, Vd = 100 mV Off-state capacitance VD = 0, (see Notes 4 and 5) Third terminal = -50 to +50 V D Package P Package SL Package 50 65 30 TISP3240F3 MIN MAX 10 10 150 200 100 50 65 30 TISP3260F3 MIN MAX 10 10 150 200 100 50 65 30 TISP3290F3 MIN MAX 10 10 150 200 100 fF UNIT A A NOTES: 4. These capacitance measurements employ a three terminal capacitance bridge incorporating a guard circuit. The third terminal is connected to the guard terminal of the bridge. 5. Further details on capacitance are given in the Applications Information section. Typical value of the parameter, not a limit value. PRODUCT INFORMATION 2 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 electrical characteristics for the T and G or the R and G terminals, TJ = 25C PARAMETER IDRM V(BO) V(BO) I(BO) VT IH dv/dt ID Coff Repetitive peak offstate current Breakover voltage TEST CONDITIONS VD = VDRM , 0C < TJ < 70C dv/dt = 250 V/ms, Source Resistance = 300 di/dt < 20 A/s 267 287 317 V Source Resistance = 50 dv/dt = 250 V/ms, Breakover current On-state voltage Holding current Critical rate of rise of off-state voltage Off-state current Off-state capacitance Source Resistance = 300 IT = 5 A, tW = 100 s di/dt = -/+30 mA/ms Linear voltage ramp, 5 Maximum ramp value < 0.85V(BR)MIN VD = 50 V f = 100 kHz, Vd = 100 mV VD = 0, VD = -50 V 57 26 11 Third terminal = -50 to +50 V VD = -5 V (see Notes 6 and 7) 10 95 45 20 57 26 11 10 95 45 20 57 26 11 10 95 45 20 A pF pF pF 5 5 kV/s 0.15 0.15 0.6 3 0.15 0.15 0.6 3 0.15 0.15 0.6 3 A V A 240 260 290 V TISP3240F3 MIN MAX 10 TISP3260F3 MIN MAX 10 TISP3290F3 MIN MAX 10 UNIT A Impulse breakover volt- dv/dt = 1000 V/s, age NOTES: 6 These capacitance measurements employ a three terminal capacitance bridge incorporating a guard circuit. The third terminal is connected to the guard terminal of the bridge. 7. Further details on capacitance are given in the Applications Information section Typical value of the parameter, not a limit value. electrical characteristics for the T and R terminals, TJ = 25C PARAMETER IDRM ID Coff Repetitive peak offstate current Off-state current TEST CONDITIONS VD = VDRM , 0C < TJ < 70C VD = 50 V f = 100 kHz, Off-state capacitance Vd = 100 mV D Package P Package SL Package 50 65 30 VD = 0, (see Notes 4 and 5) Third terminal = -50 to +50 V TISP3320F3 MIN MAX 10 10 150 200 100 50 65 30 TISP3380F3 MIN MAX 10 10 150 200 100 fF UNIT A A NOTES: 4. These capacitance measurements employ a three terminal capacitance bridge incorporating a guard circuit. The third terminal is connected to the guard terminal of the bridge. 5. Further details on capacitance are given in the Applications Information section. electrical characteristics for the T and G or the R and G terminals, TJ = 25C PARAMETER IDRM V(BO) V(BO) Repetitive peak offstate current Breakover voltage TEST CONDITIONS VD = VDRM , 0C < TJ < 70C dv/dt = 250 V/ms, Source Resistance = 300 di/dt < 20 A/s 347 407 V Source Resistance = 50 320 380 V TISP3320F3 MIN MAX 10 TISP3380F3 MIN MAX 10 UNIT A Impulse breakover volt- dv/dt = 1000 V/s, age PRODUCT INFORMATION 3 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 electrical characteristics for the T and G or the R and G terminals, TJ = 25C (Continued) PARAMETER dv/dt = 250 V/ms, I(BO) VT IH dv/dt ID Coff Breakover current On-state voltage Holding current Critical rate of rise of off-state voltage Off-state current Off-state capacitance Source Resistance = 300 IT = 5 A, tW = 100 s 0.15 5 Maximum ramp value < 0.85V(BR)MIN VD = 50 V f = 100 kHz, Vd = 100 mV Third voltage = -50 to +50 V (see Notes 6 and 7) VD = 0, VD = -5 V VD = -50 V 57 26 11 10 95 45 20 57 26 11 10 95 45 20 A pF pF pF di/dt = -/+30 mA/ms Linear voltage ramp, 5 kV/s 0.15 0.6 3 0.15 0.15 0.6 3 A V A TEST CONDITIONS TISP3320F3 MIN MAX TISP3380F3 MIN MAX UNIT NOTES: 6 These capacitance measurements employ a three terminal capacitance bridge incorporating a guard circuit. The third terminal is connected to the guard terminal of the bridge. 7. Further details on capacitance are given in the Applications Information section. Typical value of the parameter, not a limit value. PARAMETER MEASUREMENT INFORMATION +i ITSP Quadrant I Switching Characteristic ITSM IT VT IH V(BR)M -v I(BR) V(BR) I(BO) IH VDRM IDRM VD ID ID VD VDRM V(BR)M IDRM V(BR) I(BR) +v V(BO) I(BO) V(BO) VT IT ITSM Quadrant III Switching Characteristic ITSP -i PMXXAA Figure 1. VOLTAGE-CURRENT CHARACTERISTIC FOR ANY PAIR OF TERMINALS PRODUCT INFORMATION 4 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 thermal characteristics PARAMETER D Package RJA Junction to free air thermal resistance P Package SL Package MIN TYP MAX 160 100 105 C/W UNIT PRODUCT INFORMATION 5 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 A TYPICAL CHARACTERISTICS T and G, or R and G terminals OFF-STATE CURRENT vs JUNCTION TEMPERATURE 100 TC3HAF NORMALISED BREAKDOWN VOLTAGES vs JUNCTION TEMPERATURE TC3HAI 1.2 10 ID - Off-State Current - A Normalised Breakdown Voltages V(BO) 1 VD = 50 V 0*1 VD = -50 V 1.1 V(BR)M 1.0 V(BR) Normalised to V(BR) I(BR) = 100 A and 25C Positive Polarity 0*01 0*001 -25 0 25 50 75 100 125 150 TJ - Junction Temperature - C 0.9 -25 0 25 50 75 100 125 150 TJ - Junction Temperature - C Figure 2. Figure 3. NORMALISED BREAKDOWN VOLTAGES vs JUNCTION TEMPERATURE TC3HAJ ON-STATE CURRENT vs ON-STATE VOLTAGE 100 TC3HAL 1.2 Normalised Breakdown Voltages IT - On-State Current - A V(BO) 1.1 V(BR)M 10 1.0 V(BR) Normalised to V(BR) I(BR) = 100 A and 25C Negative Polarity 0.9 -25 0 25 50 75 100 125 150 TJ - Junction Temperature - C 150C 25C -40C 1 1 2 3 4 5 6 7 8 9 10 VT - On-State Voltage - V Figure 4. Figure 5. PRODUCT INFORMATION 6 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 TYPICAL CHARACTERISTICS T and G, or R and G terminals HOLDING CURRENT & BREAKOVER CURRENT vs JUNCTION TEMPERATURE IH, I(BO) - Holding Current, Breakover Current - A 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 IH 0.2 I(BO) TC3HAH NORMALISED BREAKOVER VOLTAGE vs RATE OF RISE OF PRINCIPLE CURRENT 1.3 TC3HAB Normalised Breakover Voltage 1.2 1.1 Positive Negative 0.1 -25 0 25 50 75 100 125 150 TJ - Junction Temperature - C 1.0 0*001 0*01 0*1 1 10 100 di/dt - Rate of Rise of Principle Current - A/s Figure 6. Figure 7. OFF-STATE CAPACITANCE vs TERMINAL VOLTAGE 100 TC3HAE OFF-STATE CAPACITANCE vs JUNCTION TEMPERATURE 500 TC3HAD Off-State Capacitance - pF Off-State Capacitance - pF 100 Positive Bias Terminal Bias = 0 Terminal Bias = 50 V 10 Negative Bias Terminal Bias = -50 V 10 0*1 1 1 Terminal Voltage - V 10 50 -25 0 25 50 75 100 125 150 TJ - Junction Temperature - C Figure 8. Figure 9. PRODUCT INFORMATION 7 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 TYPICAL CHARACTERISTICS T and G, or R and G terminals SURGE CURRENT vs DECAY TIME 1000 TC3HAA Maximum Surge Current - A 100 10 2 10 100 Decay Time - s 1000 Figure 10. TYPICAL CHARACTERISTICS T and R terminals OFF-STATE CURRENT vs JUNCTION TEMPERATURE 100 VD = 50 V 1.2 10 ID - Off-State Current - A Normalised Breakdown Voltages V(BO) TC3HAG NORMALISED BREAKDOWN VOLTAGES vs JUNCTION TEMPERATURE TC3HAK 1 1.1 V(BR)M 0*1 1.0 V(BR) Normalised to V(BR) I(BR) = 100 A and 25C Both Polarities 0*01 0*001 -25 0 25 50 75 100 125 150 TJ - Junction Temperature - C 0.9 -25 0 25 50 75 100 125 150 TJ - Junction Temperature - C Figure 11. Figure 12. PRODUCT INFORMATION 8 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 TYPICAL CHARACTERISTICS T and R terminals NORMALISED BREAKOVER VOLTAGE vs RATE OF RISE OF PRINCIPLE CURRENT 1.3 TC3HAC OFF-STATE CAPACITANCE vs TERMINAL VOLTAGE 100 90 80 70 60 Off-State Capacitance - fF TC3XAA P Package D Package Normalised Breakover Voltage 1.2 50 40 SL Package 30 1.1 20 Both Voltage Polarities 1.0 0*001 0*01 0*1 1 10 100 10 0*1 1 Terminal Voltage - V 10 50 di/dt - Rate of Rise of Principle Current - A/s Figure 13. Figure 14. THERMAL INFORMATION MAXIMUM NON-RECURRING 50 Hz CURRENT vs CURRENT DURATION TI3HAA THERMAL RESPONSE TI3MAA ITRMS - Maximum Non-Recurrent 50 Hz Current - A ZJ - Transient Thermal Impedance - C/W VGEN = 350 Vrms RGEN = 20 to 250 10 SL Package P Package 100 D Package P Package 10 SL Package D Package 1 0*1 1 10 100 1000 1 0*0001 0*001 0*01 0*1 1 10 100 1000 t - Current Duration - s t - Power Pulse Duration - s Figure 15. Figure 16. PRODUCT INFORMATION 9 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 APPLICATIONS INFORMATION electrical characteristics The electrical characteristics of a TISP are strongly dependent on junction temperature, TJ. Hence a characteristic value will depend on the junction temperature at the instant of measurement. The values given in this data sheet were measured on commercial testers, which generally minimise the temperature rise caused by testing. Application values may be calculated from the parameters' temperature curves, the power dissipated and the thermal response curve (Z ). lightning surge wave shape notation Most lightning tests, used for equipment verification, specify a unidirectional sawtooth waveform which has an exponential rise and an exponential decay. Wave shapes are classified in terms of peak amplitude (voltage or current), rise time and a decay time to 50% of the maximum amplitude. The notation used for the wave shape is amplitude, rise time/decay time. A 50A, 5/310 s wave shape would have a peak current value of 50 A, a rise time of 5 s and a decay time of 310 s. The TISP surge current graph comprehends the wave shapes of commonly used surges. generators There are three categories of surge generator type, single wave shape, combination wave shape and circuit defined. Single wave shape generators have essentially the same wave shape for the open circuit voltage and short circuit current (e.g. 10/1000 s open circuit voltage and short circuit current). Combination generators have two wave shapes, one for the open circuit voltage and the other for the short circuit current (e.g. 1.2/50 s open circuit voltage and 8/20 s short circuit current) Circuit specified generators usually equate to a combination generator, although typically only the open circuit voltage waveshape is referenced (e.g. a 10/700 s open circuit voltage generator typically produces a 5/310 s short circuit current). If the combination or circuit defined generators operate into a finite resistance the wave shape produced is intermediate between the open circuit and short circuit values. current rating When the TISP switches into the on-state it has a very low impedance. As a result, although the surge wave shape may be defined in terms of open circuit voltage, it is the current wave shape that must be used to assess the required TISP surge capability. As an example, the CCITT IX K17 1.5 kV, 10/700 s surge is changed to a 38 A, 5/310 s waveshape when driving into a short circuit. Thus the TISP surge current capability, when directly connected to the generator, will be found for the CCITT IX K17 waveform at 310 s on the surge graph and not 700 s. Some common short circuit equivalents are tabulated below: STANDARD OPEN CIRCUIT VOLTAGE 1.5 kV, 10/700 s 1 kV, 10/700 s 1.5 kV, 0.5/700 s 2.0 kV, 10/700 s 2.0 kV, 10/700 s SHORT CIRCUIT CURRENT 38 A, 5/310 s 25 A, 5/310 s 38 A, 0.2/310 s 50 A, 5/200 s 50 A, 5/310 s CCITT IX K17 CCITT IX K20 RLM88 VDE 0433 FTZ R12 Any series resistance in the protected equipment will reduce the peak circuit current to less than the generators' short circuit value. A 2 kV open circuit voltage, 50 A short circuit current generator has an effective output impedance of 40 (2000/50). If the equipment has a series resistance of 25 then the surge current requirement of the TISP becomes 31 A (2000/65) and not 50 A. PRODUCT INFORMATION 10 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 APPLICATIONS INFORMATION protection voltage The protection voltage, (V(BO) ), increases under lightning surge conditions due to thyristor regeneration. This increase is dependent on the rate of current rise, di/dt, when the TISP is clamping the voltage in its breakdown region. The V(BO) value under surge conditions can be estimated by multiplying the 50 Hz rate V(BO) (250 V/ms) value by the normalised increase at the surge's di/dt (Figure 12.) . An estimate of the di/dt can be made from the surge generator voltage rate of rise, dv/dt, and the circuit resistance. As an example, the CCITT IX K17 1.5 kV, 10/700 s surge has an average dv/dt of 150 V/s, but, as the rise is exponential, the initial dv/dt is higher, being in the region of 450 V/s. The instantaneous generator output resistance is 25 . If the equipment has an additional series resistance of 20 , the total series resistance becomes 45 . The maximum di/dt then can be estimated as 450/45 = 10 A/s. In practice the measured di/dt and protection voltage increase will be lower due to inductive effects and the finite slope resistance of the TISP breakdown region. capacitance off-state capacitance The off-state capacitance of a TISP is sensitive to junction temperature, TJ , and the bias voltage, comprising of the dc voltage, VD , and the ac voltage, Vd . All the capacitance values in this data sheet are measured with an ac voltage of 100 mV. The typical 25C variation of capacitance value with ac bias is shown in Figure17. When VD >> Vd the capacitance value is independent on the value of Vd . The capacitance is essentially constant over the range of normal telecommunication frequencies. NORMALISED CAPACITANCE vs RMS AC TEST VOLTAGE 1.05 AIXXAA 1.00 Normalised Capacitance 0.95 0.90 0.85 0.80 Normalised to Vd = 100 mV DC Bias, VD = 0 0.70 1 10 100 1000 Vd - RMS AC Test Voltage - mV 0.75 Figure 17. PRODUCT INFORMATION 11 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 APPLICATIONS INFORMATION longitudinal balance Figure 18 shows a three terminal TISP with its equivalent "delta" capacitance Each capacitance, CTG , CRG and CTR , is the true terminal pair capacitance measured with a three terminal or guarded capacitance bridge. If wire R is biased at a larger potential than wire T then CTG > CRG . Capacitance CTG is equivalent to a capacitance of CRG in parallel with the capacitive difference of (CTG - CRG ). The line capacitive unbalance is due to (CTG - CRG ) and the capacitance shunting the line is CTR + CRG/2 . Figure 18. All capacitance measurements in this data sheet are three terminal guarded to allow the designer to accurately assess capacitive unbalance effects. Simple two terminal capacitance meters (unguarded third terminal) give false readings as the shunt capacitance via the third terminal is included. PRODUCT INFORMATION 12 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 MECHANICAL DATA D008 plastic small-outline package This small-outline package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. D008 5,00 (0.197) 4,80 (0.189) 8 7 6 5 Designation per JEDEC Std 30: PDSO-G8 6,20 (0.244) 5,80 (0.228) 4,00 (0.157) 3,81 (0.150) 1 2 3 4 1,75 (0.069) 1,35 (0.053) 7 NOM 3 Places 0,50 (0.020) x 45NOM 0,25 (0.010) 5,21 (0.205) 4,60 (0.181) 0,203 (0.008) 0,102 (0.004) 0,79 (0.031) 0,28 (0.011) Pin Spacing 1,27 (0.050) (see Note A) 6 Places 0,51 (0.020) 0,36 (0.014) 8 Places 0,229 (0.0090) 0,190 (0.0075) 7 NOM 4 Places 4 4 1,12 (0.044) 0,51 (0.020) ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES MDXXAA NOTES: A. B. C. D. Leads are within 0,25 (0.010) radius of true position at maximum material condition. Body dimensions do not include mold flash or protrusion. Mold flash or protrusion shall not exceed 0,15 (0.006). Lead tips to be planar within 0,051 (0.002). PRODUCT INFORMATION 13 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 MECHANICAL DATA P008 plastic dual-in-line package This dual-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions The package is intended for insertion in mounting-hole rows on 7,62 (0.300) centers. Once the leads are compressed and inserted, sufficient tension is provided to secure the package in the board during soldering. Leads require no additional cleaning or processing when used in soldered assembly. P008 10,2 (0.400) MAX 8 7 6 5 Designation per JEDEC Std 30: PDIP-T8 Index Dot C L 7,87 (0.310) 7,37 (0.290) T.P. 6,60 (0.260) 6,10 (0.240) C L 1 2 3 4 1,78 (0.070) MAX 4 Places 5,08 (0.200) MAX Seating Plane 0,51 (0.020) MIN 105 90 8 Places 3,17 (0.125) MIN 2,54 (0.100) T.P. 6 Places (see Note A) 0,533 (0.021) 0,381 (0.015) 8 Places 0,36 (0.014) 0,20 (0.008) 8 Places ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES NOTE A: Each pin centerline is located within 0,25 (0.010) of its true longitudinal position MDXXABA PRODUCT INFORMATION 14 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 MECHANICAL DATA SL003 3-pin plastic single-in-line package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. SL003 10,2 (0.400) MAX 4,57 (0.180) MAX 8,31 (0.327) MAX Index Dot 12,9 (0.492) MAX 6,60 (0.260) 6,10 (0.240) 4,267 (0.168) MIN 1 2 3 Pin Spacing 2,54 (0.100) T.P. (see Note A) 2 Places 1,854 (0.073) MAX 0,356 (0.014) 0,203 (0.008) 3 Places 0,711 (0.028) 0,559 (0.022) 3 Places ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES NOTES: A. Each pin centerline is located within 0,25 (0.010) of its true longitudinal position. B. Body molding flash of up to 0,15 (0.006) may occur in the package lead plane. MDXXAD PRODUCT INFORMATION 15 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 MECHANICAL DATA D008 tape dimensions D008 Package (8 pin SOIC) Single-Sprocket Tape 4,10 3,90 8,05 7,95 2,05 1,95 1,60 1,50 0,40 0,8 MIN. 5,55 5,45 12,30 11,70 6,50 6,30 Carrier Tape Embossment o 1,5 MIN. 0 MIN. Direction of Feed 2,2 2,0 Cover Tape ALL LINEAR DIMENSIONS IN MILLIMETERS NOTES: A. Taped devices are supplied on a reel of the following dimensions:Reel diameter: Reel hub diameter: Reel axial hole: B. 2500 devices are on a reel. 330 +0,0/-4,0 mm 100 2,0 mm 13,0 0,2 mm MDXXAT PRODUCT INFORMATION 16 TISP3240F3, TISP3260F3, TISP3290F3, TISP3320F3, TISP3380F3 DUAL SYMMETRICAL TRANSIENT VOLTAGE SUPPRESSORS MARCH 1994 - REVISED SEPTEMBER 1997 IMPORTANT NOTICE Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the information being relied on is current. PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except as mandated by government requirements. PI accepts no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor is any license, either express or implied, granted under any patent right, copyright, design right, or other intellectual property right of PI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS. Copyright (c) 1997, Power Innovations Limited PRODUCT INFORMATION 17 |
Price & Availability of TISP3320F3
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |